Microstructure, mechanical properties, biocorrosion behavior, and cytotoxicity of as-extruded Mg-Nd-Zn-Zr alloy with different extrusion ratios

Journal of the Mechanical Behavior of Biomedical Materials

Volumn 9, Issue , 2012, Pages 153-162

  Zhang, Xiaobo ^a   Yuan, Guangyin ^a,b   Niu, Jialin ^a   Fu, Penghuai ^a   Ding, Wenjiang ^a,b  

^a Shanghai Jiao Tong University   (China)

^b SHANGHAI JIAO TONG UNIVERSITY   (China)

Author keywords

Biocorrosion behavior; Cytotoxicity; Extrusion ratio; Magnesium alloy; Mechanical properties

Indexed keywords

AGING TREATMENT; AZ31; BIOCORROSION; BIOMEDICAL APPLICATIONS; BIOMEDICAL MATERIAL; CELL TOXICITY; COARSER GRAINS; CYTOTOXICITY TEST; EXTRUSION RATIO; FINER GRAINS; HYDROGEN EVOLUTION; MASS LOSS; MG ALLOY; MG-ND-ZN-ZR; MG-ND-ZN-ZR ALLOYS; ROOM TEMPERATURE; SIMULATED BODY FLUIDS; UNIFORM CORROSION;

ALLOYS; BIODEGRADATION; BIOLOGICAL MATERIALS; BIOMATERIALS; BIOMEDICAL ENGINEERING; CORROSION RESISTANCE; ELONGATION; EXTRUSION; HYDROGEN; MAGNESIUM; MAGNESIUM ALLOYS; MECHANICAL PROPERTIES; MEDICAL APPLICATIONS; MICROSTRUCTURE; NEODYMIUM; ZINC; ZIRCONIUM;

CYTOTOXICITY;

ALLOY; BIOMEDICAL AND DENTAL MATERIALS; MAGNESIUM; NEODYMIUM; ZINC; ZIRCONIUM;

AGING; ANIMAL CELL; ARTICLE; BODY FLUID; CONTROLLED STUDY; CORROSION; CYTOTOXICITY; HYDROGEN EVOLUTION; MOUSE; NONHUMAN; PRIORITY JOURNAL; ROOM TEMPERATURE; SIMULATION; STRENGTH;

ALLOYS; ANIMALS; BIOCOMPATIBLE MATERIALS; BODY FLUIDS; CELL SURVIVAL; CORROSION; ELECTRONS; HUMANS; MAGNESIUM; MATERIALS TESTING; MICE; MICROSCOPY, ELECTRON, SCANNING; NEODYMIUM; STRESS, MECHANICAL; TEMPERATURE; TETRAZOLIUM SALTS; THIAZOLES; ZINC; ZIRCONIUM;

EID: 84862816681     PISSN: 17516161     EISSN: 18780180     Source Type: Journal    
DOI: 10.1016/j.jmbbm.2012.02.002     Document Type: Article

References (38)

1. Alvarez-Lopez M., Pereda M.D., Valle J.A., Fernandez-Lorenzo M., Garcia-Alonso M.C., Ruano O.A., Escudero M.L. Corrosion behaviour of AZ31 magnesium alloy with different grain sizes in simulated biological fluids. Acta Biomater. 2010, 6:1763-1771.
2. Azeem M.A., Tewari A., Mishra S., Gollapudi S., Ramamurty U. Development of novel grain morphology during hot extrusion of magnesium AZ21 alloy. Acta Mater. 2010, 58:1495-1502.
3. Ben-Haroush M., Ben-Hamu G., Eliezer D., Wagner L. The relation between microstructure and corrosion behavior of AZ80 Mg alloy following different extrusion temperatures. Corros. Sci. 2008, 50:1766-1778.
4. Castellani C., Lindtner R.A., Hausbrandt P., Tschegg E., Stanzl-Tschegg S.E., Zanoni G., Beck S., Weinberg A.-M. Bone-implant interface strength and osseointegration: biodegradable magnesium alloy versus standard titanium control. Acta Biomater. 2011, 7:432-440.
5. Chang J.W., Fu P.H., Guo X.W., Peng L.M., Ding W.J. The effects of heat treatment and Zirconium on the corrosion behavior of Mg-3Nd-0.2Zn-0.4Zr (wt%) alloy. Corros. Sci. 2007, 49:2612-2627.
6. Chen Y.J., Wang Q.D., Peng J.G., Zhai C.Q., Ding W.J. Effects of extrusion ratio on the microstructure and mechanical properties of AZ31 Mg alloy. J. Mater. Process. Technol. 2007, 182:281-285.
7. Erbel R., Mario C.D., Bartunek J., Bonnier J., Bruyne B., Eberli F.R., Erne P., Heublein B., Horrigan M., Ilsley C., Bose D., Koolen J., Luscher T.F., Weissman N., Waksman R. Temporary scaffolding of coronary arteries with bioabsorbable magnesium stents: a prospective, non-randomised multicentre trial. Lancet 2007, 369:1869-1875.
8. Erdmann N., Angrisani N., Reifenrath J., Lucas A., Thorey F., Bormann D., Meyer-Lindenberg A. Biomechanical testing and degradation analysis of MgCa0.8 alloy screws: a comparative in vivo study in rabbits. Acta Biomater. 2011, 7:1421-1428.
9. Ferreira P.C., Piai K.A., Takayanagui A.M.M., Segura-Munoz S.I. Aluminum as a risk factor for Alzheimer's disease. Rev. Lat. Am. Enfermagem. 2008, 16:151-157.
10. Feyerabend F., Fischer J., Holtz J., Witte F., Willumeit R., Drucher H., Vogt C., Hort N. Evaluation of short-term effects of rare earth and other elements used in magnesium alloys on primary cells and cell lines. Acta Biomater. 2010, 6:1834-1842.
11. Fischer J., Prosenc M.H., Wolff M., Hort N., Willumeit R., Feyerabend F. Interference of magnesium corrosion with tetrazolium-based cytotoxicity assays. Acta Biomater. 2010, 6:1813-1823.
12. Fu P.H., Peng L.M., Jiang H.Y., Chang J.W., Zhai C.Q. Effects of heat treatments on the microstructures and mechanical properties of Mg-3Nd-0.2Zn-0.4Zr (wt%) alloy. Mater. Sci. Eng. A 2008, 486:183-192.
13. Fu P.H., Peng L.M., Ma L., Jiang H.Y., Zhai C.Q. Microstructure and mechanical properties of extruded Mg-3Nd-0.2Zn-0.4Zr (wt%) alloy. Magnesium Technol. 2009, 301-304.
14. Gu X.N., Zhou W.R., Zheng Y.F., Cheng Y., Wei S.C., Zhong S.P., Xi T.F., Chen L.J. Corrosion fatigue behaviors of two biomedical Mg alloys-AZ91D and WE43-in simulated body fluid. Acta Biomater. 2010, 6:4605-4613.
15. Hamu G.B., Eliezer D., Wagner L. The relation between severe plastic deformation microstructure and corrosion behavior of AZ31 magnesium alloy. J. Alloys. Compd. 2009, 468:222-229.
16. Hanzi A.C., Gunde P., Schinhammer M., Uggowitzer P.J. On the biodegradation performance of an Mg-Y-RE alloy with various surface conditions in simulated body fluid. Acta Biomater. 2009, 5:162-171.
17. 2 alloys at room and elevated temperatures. Mater. Trans. 2010, 51:1640-1647.
18. Kirkland N.T., Lespagnol J., Birbilis N., Staiger M.P. A survey of bio-corrosion rates of magnesium alloys. Corros. Sci. 2010, 52:287-291.
19. Li D.Q., Wang Q.D., Ding W.J., Blandin J.J., Suery M. Influence of extrusion temperature on microstructure and mechanical properties of Mg-4Y-4Sm-0.5Zr alloy. Trans. Nonferr. Met. Soc. China 2010, 20:1311-1315.
20. Liu C.L., Xin Y.C., Tian X.B., Chu P.K. Corrosion behavior of AZ91 magnesium alloy treated by plasma immersion ion implantation and deposition in artificial physiological fluids. Thin Solid Films 2007, 516:422-427.
21. Murai T., Matsuoka S., Miyamoto S., Oki Y. Effects of extrusion conditions on microstructure and mechanical properties of AZ31B magnesium alloy extrusions. J. Mater. Process. Technol. 2003, 141:207-212.
22. Ralston K.D., Birbilis N. Effect of grain size on corrosion: A review. Corrosion 2010, 66:075015.1-075015.13.
23. Scharnagl N., Blawert C., Dietzel W. Corrosion protection of magnesium alloy AZ31 by coating with poly(ether imides) (PEI). Surf. Coat. Technol. 2009, 203:1423-1428.
24. Shingde M., Hughes J., Boadle R., Wills J., Pamphlett R. Macrophagic myofasciitis associated with vaccine-derived aluminium. Med. J. Aust. 2005, 183:145-146.
25. Song G.L., Atrens A., Dargusch M. Influence of microstructure on the corrosion of diecast AZ91D. Corros. Sci. 1999, 41:249-273.
26. Uematsu Y., Tokaji K., Kamakura M., Uchida K., Shibata H., Bekku N. Effect of extrusion conditions on grain refinement and fatigue behaviour in magnesium alloys. Mater. Sci. Eng. A 2006, 434:131-140.
27. Waksman R., Pakala R., Kuchulakanti P.K., Baffour R., Hellinga D., Seabron R., Tio F.O., Wittchow E., Hartwig S., Harder C., Rohde R., Heublein B., Andreae A., Waldmann K.H., Haverich A. Safety and efficacy of bioabsorbable magnesium alloy stents in porcine coronary arteries. Catheter. Cardiovasc. Interv. 2006, 68:607-617.
28. Walter R., Bobby K.M. In-vitro degradation behaviour of WE54 magnesium alloy in simulated body fluid. Mater. Lett. 2011, 65:748-750.
29. Witte F., Fischer J., Nellesen J., Crostack H.-A., Kaese V., Pisch A., Beckmann F., Windhagen H. In vitro and in vivo corrosion measurements of magnesium alloys. Biomaterials 2006, 27:1013-1018.
30. Witte F., Hort N., Vogt C., Cohen S., Kainer K.U., Willumeit R., Feyerabend F. Degradable biomaterials based on magnesium corrosion. Curr. Opin. Solid State Mater. Sci. 2008, 12:63-72.
31. Witte F., Kaese V., Haferkamp H., Switzer E., Meyer-Lindenberg A., Wirth C.J., Windhagen H. In vivo corrosion of four magnesium alloys and the associated bone response. Biomaterials 2005, 26:3557-3563.
32. Ye X.Y., Chen M.F., Yang M., Wei J., Liu D.B. In vitro corrosion resistance and cytocompatibility of nano-hydroxyapatite reinforced Mg-Zn-Zr composites. J. Mater. Sci. Mater. Med. 2010, 21:1321-1328.
33. Yuan G.Y., Liu Y., Ding W.J., Lu C. Effects of extrusion on the microstructure and mechanical properties of Mg-Zn-Gd alloy reinforced with quasicrystalline particles. Mater. Sci. Eng. A 2008, 474:348-354.
34. Zhang E.L., Yin D.S., Xu L.P., Yang L., Yang K. Microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-Mn alloys for biomedical application. Mater. Sci. Eng. C 2009, 29:987-993.
35. Zhang B.P., Geng L., Huang L.J., Zhang X.X., Dong C.C. Enhanced mechanical properties in fine-grained Mg-1.0Zn-0.5Ca alloys prepared by extrusion at different temperatures. Scr. Mater. 2010, 63:1024-1027.
36. Zhang S.X., Zhang X.N., Zhao C.L., Li J.N., Song Y., Xie C.Y., Tao H.R., Zhang Y., He Y.H., Jiang Y., Bian Y.J. Research on an Mg-Zn alloy as a degradable biomaterial. Acta Biomater. 2010, 6:626-640.
37. Zhang X.B., Yuan G.Y., Mao L., Niu J.L., Fu P.H., Ding W.J. Effects of extrusion and heat treatment on the mechanical properties and biocorrosion behaviors of a Mg-Nd-Zn-Zr alloy. J. Mech. Behav. Biomed. Mater. 2012, 7:77-86.
38. Zheng Y.F., Gu X.N., Xi Y.L., Chai D.L. In vitro degradation and cytotoxicity of Mg/Ca composites produced by powder metallurgy. Acta Biomater. 2010, 6:1783-1791.