Effects of Fe-Ni alloy nanoparticles on the mechanical properties and microstructures of Al 2O 3/Fe-Ni nanocomposites prepared by rapid sintering

Ceramics International

Volumn 38, Issue 5, 2012, Pages 4305-4312

  Lee, Young In ^a   Lee, Jun Tae ^a,b   Choa, Yong Ho ^a  

^a Hanyang University   (South Korea)

^b Korea Testing Laboratory   (South Korea)

Author keywords

B. Nanocomposite; C. Mechanical properties; Fe Ni dispersion particle; FeAl 2O 3 spinel; High frequency induction heated sintering (HFIHS); Microstructure

Indexed keywords

DISPERSION PARTICLES; FEAL 2O 3 SPINEL; FENI ALLOYS; HIGH HEATING RATES; HIGH-FREQUENCY INDUCTION-HEATED SINTERING; MAGNETIC METALS; METAL OXIDE PARTICLES; METAL OXIDE POWDERS; MICROSTRUCTURE AND MECHANICAL PROPERTIES; NANO-COMPOSITE POWDERS; PHASE IDENTIFICATION; PROPERTIES AND MICROSTRUCTURES; RAPID SINTERING; SELECTIVE REDUCTION; SINTERED SPECIMEN; THREE-POINT BENDING TEST;

ALUMINUM; DISPERSIONS; IRON COMPOUNDS; MECHANICAL PROPERTIES; METALLIC COMPOUNDS; MICROSTRUCTURE; NANOCOMPOSITES; POWDER METALS; SINTERING; X RAY DIFFRACTION; X RAY POWDER DIFFRACTION;

IRON ALLOYS;

EID: 84862811665     PISSN: 02728842     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ceramint.2012.02.011     Document Type: Article

References (30)

1. 3 using non-isothermal DSC method Mater. Chem. Phys. 91 2005 140 145
2. 3 reactions J. Am. Ceram. Soc. 78 1995 572 576
3. T.J. Marrow, G.A.D. Briggs, and S.G. Roberts In situ scanning acoustic microscopy of crack bridging in alumina J. Eur. Ceram. Soc. 14 1994 111 116
4. 3-Ni composites with high strength and fracture toughness J. Am. Ceram. Soc. 83 2000 1279 1280
5. 3 composites J. Alloys Compd. 352 2003 163 167
6. 3 nanocomposites Scripta Mater. 60 2009 195 198
7. 3 nanocomposites synthesized by reactive milling followed by spark plasma sintering Mater. Sci. Forum 710 2012 291 296
8. 3 nano-composite coatings prepared by sediment co-deposition Surf. Coat. Technol. 202 2008 4137 4144
9. 3/Ni nanocomposite and its mechanical properties Ceram. Int. 34 2008 213 217
10. E. Menendez, G. Salazar-Alvarez, A.P. Zhilyaev, S. Surinach, M.D. Baro, J. Nogues, and J. Sort Cold consolidation of metal-ceramic nanocomposite powders with large ceramic fractions Adv. Funct. Mater. 18 2008 3293 3298
11. L. Wang, D. Li, M. Koike, S. Koso, Y. Nakagawa, Y. Xu, and K. Tomishige Catalytic performance and characterization of Ni-Fe catalysts for the steam reforming of tar from biomass pyrolysis to synthesis gas Appl. Catal. A 392 2011 248 255
12. 3 matrix J. Alloys Compd. 482 2009 155 159
13. 3 composites Ceram. Int. 32 2006 575 581
14. 3 nano/micro hybrid composites prepared by spark plasma sintering Scripta Mater. 64 2011 777 780
15. 3 nanocomposite coatings under ultrasound conditions J. Alloys Compd. 459 2008 548 552
16. 3 composite coating Rare Met. 25 2006 174 178
17. 2(3Y) by spark plasma sintering J. Eur. Ceram. Soc. 20 2000 2441 2445
18. 3-cBN composites facilitated by Ni nanoparticle precipitation on cBN powder by rotary chemical vapor deposition J. Eur. Ceram. Soc. 31 2011 2083 2087
19. M. Gupta, and W.L.E. Wong Enhancing overall mechanical performance of metallic materials using two-directional microwave assisted rapid sintering Scripta Mater. 52 2005 479 483
20. S.W. Kim, and K.A.R. Khalil High-frequency induction heat sintering of mechanically alloyed alumina-yttria-stabilized zirconia nano-bioceramics J. Am. Ceram. Soc. 89 2006 1280 1285
21. 3 addition on consolidation and properties of 8 mol% yttria-stabilized zirconia by high-frequency induction heated sintering (HFIHS) Ceram. Int. 35 2009 363 368
22. H.C. Kim, I.J. Shon, and Z.A. Munir Rapid sintering of ultra-fine WC-10 wt% Co by high-frequency induction heating J. Mater. Sci. 40 2005 2849 2854
23. 3 composite by high frequency induction heating J. Alloys Compd. 509 2011 L7 L10
24. 3/SiC-particle hybrid composites J. Mater. Sci. 35 2000 3143 3149
25. N. Bamba, Y.H. Choa, T. Sekino, and K. Niihara Microstructure and mechanical properties of yttria stabilized zirconia/silicon carbide nanocomposites J. Eur. Ceram. Soc. 18 1998 693 699
26. 3/SiC nanocomposites J. Ceram. Soc. Jpn. 100 1992 448 453
27. J.E. Burke Role of grain boundaries in sintering J. Am. Ceram. Soc. 40 1957 80 85
28. 3/Fe-Ni nanocomposites by atmosphere-controlled sintering and their properties J. Kor. Ceram. Soc. 39 2002 199 203
29. 3/Cu-nitrate mixtures Scripta Mater. 44 2011 2117 2120
30. T. Ohji, Y.K. Jeoung, Y.H. Choa, and K. Niihara Strengthening and toughening mechanisms of ceramic nanocomposites J. Am. Ceram. Soc. 81 1998 1453 1460