Bending strength of piezoelectric ceramics and single crystals for multifunctional load-bearing applications

IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

Volumn 59, Issue 6, 2012, Pages 1085-1092

  Anton, Steven R ^a   Erturk, Alper ^b   Inman, Daniel J ^c  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

^b GEORGIA INSTITUTE OF TECHNOLOGY   (United States)

^c UNIVERSITY OF MICHIGAN   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACTIVE DEVICES; BEND TEST; BENDING LOAD; EULER BERNOULLI BEAM THEORY; EXPERIMENTAL TEST; FERROELASTICS; HIGH STRENGTH; LINEAR ESTIMATES; LOAD-BEARING; LOAD-BEARING CAPACITY; MONOLITHIC CERAMICS; MULTI-FUNCTIONAL MATERIALS; MULTIPLE FUNCTION; PIEZO-CERAMICS; PIEZOELECTRIC ELEMENTS; PIEZOELECTRIC LAYERS; PIEZOELECTRIC SYSTEM; PIEZOELECTRICS; PMN-PZT; PZT; RESEARCH COMMUNITIES; SINGLE-CRYSTAL MATERIALS; THREE-POINT BEND TEST;

BENDING STRENGTH; ENERGY CONVERSION; NANOCOMPOSITE FILMS; PIEZOELECTRIC CERAMICS; PIEZOELECTRICITY; SINGLE CRYSTAL SURFACES; TESTING;

PIEZOELECTRIC MATERIALS;

EID: 84862658623     PISSN: 08853010     EISSN: None     Source Type: Journal    
DOI: 10.1109/TUFFC.2012.2299     Document Type: Article

References (33)

1. W. Keywang, K. Lubitz, and W. Wersing, Piezoelectricity: Evolution and Future of a Technology: New York, NY: Springer, 2008.
2. K. Uchino, "Piezoelectric actuators 2006," J. Electroceram., vol. 20, no. 3-4, pp. 301-311, 2008.
3. L. Christodoulou and J. D. Venables, "Multifunctional material systems: The first generation," JOM, vol. 55, no. 12, pp. 39-45, 2003.
4. N. S. Shenck and J. A. Paradiso, "Energy scavenging with shoemounted piezoelectrics," IEEE Micro, vol. 21, no. 3, pp. 30-42, 2001.
5. A. Erturk, J. M. Renno, and D. J. Inman, "Modeling of piezoelectric energy harvesting from an L-shaped beam-mass structure with an application to UAVs," J. Intell. Mater. Syst. Struct., vol. 20, no. 5, pp. 529-544, 2009.
6. S .-Y. Wu, T. L. Turner, and S. A. Rizzi, "Piezoelectric shunt vibration damping of an F-15 panel under high-acoustic excitation," in Smart Structures and Materials 2000: Damping and Isolation, 2000, pp. 276-287.
7. J. S. Browning, R. G. Cobb, R. A. Canfield, and S. K. Miller, "F-16 ventral fin buffet alleviation using piezoelectric actuators," in 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conf., 2009, art. no. AIAA 2009-2538.
8. S. R. Anton, A. Erturk, and D. J. Inman, "Multifunctional selfcharging structures using piezoceramics and thin-film batteries," Smart Mater. Struct., vol. 19, no. 11, art. no. 115021, 2010.
9. T. Fett, D. Munz, and G. Thun, "Tensile and bending strength of piezoelectric ceramics," J. Mater. Sci. Lett., vol. 18, no. 23, pp. 1899-1902, 1999.
10. D. Munz, T. Fett, S. Muller, and G. Thun, "Deformation and strength behaviour of a soft PZT ceramic," Proc. SPIE, vol. 3323, pp. 84-95, 1998.
11. T. Fett, M. Kamlah, D. Munz, and G. Thun, "Strength of a PZT ceramic under different test conditions," Proc. SPIE, vol. 3992, pp. 197-208, 2000.
12. T. Fett, D. Munz, and G. Thun, "Bending strength of a PZT ceramic under electric fields," J. Eur. Ceram. Soc., vol. 23, no. 2, pp. 195-202, 2003.
13. R. Fu and T.-Y. Zhang, "Influences of temperature and electric field on the bending strength of lead zirconate titanate ceramics," Acta Mater., vol. 48, no. 8, pp. 1729-1740, 2000.
14. N. Di and D. J. Quesnel, "Photoelastic effects in Pb (Mg1/3Nb2/3) O3-29%PbTiO3 single crystals investigated by three-point bending technique," J. Appl. Phys., vol. 101, no. 4, art. no. 043522, 2007.
15. P. Zhao, S. Goljahi, W. Dong, T. Wu, P. Finkel, R. Sahul, K. Snook, J. Luo, W. Hackenberger, and C. S. Lynch, "The strength of PIN-PMN-PT single crystals under bending with a longitudinal electric field," Smart Mater. Struct., vol. 20, no. 5, art. no. 055006 2011.
16. T. Fett, S. Muller, D. Munz, and G. Thun, "Nonsymmetry in the deformation behaviour of PZT," J. Mater. Sci. Lett., vol. 17, no. 4, pp. 261-265, 1998.
17. A. Nadai, Theory of Flow and Fracture of Solids. New York, NY: McGraw-Hill, 1950.
18. F. M. Discenzo, D. Chung, and K. A. Loparo, "Pump condition monitoring using self-powered wireless sensors," Sound Vibrat., vol. 40, pp. 12-15, May 2006.
19. S .-H. Yoon, Y.-H. Lee, S.-W. Lee, and C. Lee, "Energy-harvesting characteristics of PZT-5A under gunfire shock," Mater. Lett., vol. 62, no. 21-22, pp. 3632-3635, 2008.
20. S. Roundy and P. K. Wright, "A piezoelectric vibration based generator for wireless electronics," Smart Mater. Struct., vol. 13, no. 5, pp. 1131-1142, 2004.
21. C. L. Zhang, "Harvesting magnetic energy using extensional vibration of laminated magnetoelectric plates," Appl. Phys. Lett., vol. 95, no. 1, art. no. 013511 2009.
22. H. Y. Lee, S. J. Zhang, and T. R. Shrout, "Development of high TC PMN-PZT piezoelectric single crystals by the solid-state crystal growth (SSCG) technique," in 17th IEEE Int. Symp. Applications of Ferroelectrics, 2008, pp. 1-2.
23. S. Zhang, S.-M. Lee, D.-H. Kim, H.-Y. Lee, and T. R. Shrout, "Temperature dependence of the dielectric, piezoelectric, and elastic constants for Pb(Mg1/3Nb2/3)O3-PbZrO3-PbTiO3 piezocrystals," J. Appl. Phys., vol. 102, no. 11, art. no. 114103, 2007.
24. A. Badel, A. Benayad, E. Lefeuvre, L. Lebrun, C. Richard, and D. Guyomar, "Single crystals and nonlinear process for outstanding vibration-powered electrical generators," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 53, no. 4, pp. 673-684, 2006.
25. K. Ren, Y. Liu, X. Geng, H. F. Hofmann, and Q. M. Zhang, "Single crystal PMN-PT/epoxy 1-3 composite for energy-harvesting application," IEEE Trans. Ultrason. Ferroelectr. Freq. Control, vol. 53, no. 3, pp. 631-638, 2006.
26. A. Erturk, O. Bilgen, and D. J. Inman, "Power generation and shunt damping performance of a single crystal lead magnesium niobatelead zirconate titanate unimorph: Analysis and experiment," Appl. Phys. Lett., vol. 93, no. 22, art. no. 224102, 2008.
27. S. E. Moon, S. Q. Lee, S.-K. Lee, Y.-G. Lee, Y. S. Yang, K.-H. Park, and J. Kim, "Sustainable vibration energy harvesting based on Zrdoped PMN-PT piezoelectric single crystal cantilevers," ETRI J., vol. 31, no. 6, pp. 688-694, 2009.
28. H. A. Sodano, J. Lloyd, and D. J. Inman, "An experimental comparison between several active composite actuators for power generation," Smart Mater. Struct., vol. 15, no. 5, pp. 1211-1216, 2006.
29. S. R. Anton, A. Erturk, N. Kong, D. S. Ha, and D. J. Inman, "An investigation on multifunctional piezoelectric composite spars for energy harvesting in unmanned aerial vehicles," presented at 17th Int. Conf. Composite Materials, Edinburg, UK, 2009.
30. S. R. Anton, A. Erturk, N. Kong, D. S. Ha, and D. J. Inman, "Selfcharging structures using piezoceramics and thin-film batteries," in ASME Conf. Smart Materials, Adaptive Structures and Intelligent Systems, 2009, art. no. SMASIS2009-1368.
31. A. Erturk, S. R. Anton, and D. J. Inman, "Piezoelectric energy harvesting from multifunctional wing spars for UAVs-Part 1: Coupled modeling and preliminary analysis," Proc. SPIE, vol. 7288, art. no. 72880C-15, 2009.
32. Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature, ASTM C 1161-02c, 2006.
33. Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics, ASTM C 1239-00, 2006.