Application of wood waste for removal of reactive blue 19 from aqueous solutions: Optimization through response surface methodology

Environmental Engineering and Management Journal

Volumn 11, Issue 4, 2012, Pages 795-804

  Azizi, Armineh ^a   Moghaddam, Mohammad Reza Alavi ^a   Arami, Mokhtar ^a  

^a AMIRKABIR UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

Adsorption; Desorption; Reactive blue 19; Response surface methodology; Wood waste

Indexed keywords

EID: 84862495832     PISSN: 15829596     EISSN: None     Source Type: Journal    
DOI: 10.30638/eemj.2012.102     Document Type: Article

References (39)

1. Aci{dotless}kel Ü., Ersan M., SagAci{dotless}kel Y., (2010), Optimization of critical medium components using response surface methodology for lipase production by Rhizopus delemar, Food and Bioproducts Processing, 88, 31-39.
2. Aleboyeh A., Daneshvar N., Kasiri M.B., (2008), Optimization of C.I. Acid Red 14 azo dye removal by electrocoagulation batch process with response surface methodology, Chemical Engineering and Processing, 47, 827-832.
3. Arulkumar M., Sathishkumar P., Palvannan T., (2011), Optimization of Orange G dye adsorption by activated carbon of Thespesia populnea pods using response surface methodology, Journal of Hazardous Materials, 186, 827-834.
4. Atar A., Olgun A., (2009), Removal of basic and acid dyes from aqueous solutions by a waste containing boron impurity, Desalination, 249, 109-115.
5. Azizi A., Alavi Moghaddam M.R., Arami M., (2010), Performance of pulp and paper sludge for reactive blue 19 dye removal from aqueous solutions: isotherm and kinetic study, Journal of Residuals Science and Technology, 7, 173-179.
6. Azizi A., Alavi Moghaddam M.R., Arami M., (2011a), Application of response surface methodology for optimization of reactive blue 19 dye removal from aqueous solutions using pulp and paper sludge, Fresenius Environmental Bulletin, 20, 929-938.
7. Azizi A., Alavi Moghaddam M.R., Arami M., (2011b), Wood waste from Mazandaran wood and the paper industry as a low cost adsorbent for removal of a reactive dye, Journal of Residuals Science and Technology, 8, 21-28.
8. Batzias F.A., Sidiras D.K., (2007), Simulation of dye adsorption by beech sawdust as affected by pH, Journal of Hazardous Materials, 141, 668-679.
9. Betianu C., Caliman F.A. Gavrilescu M., Cretescu I., Cojocaru C., Poulios I., (2008), Response surface methodology applied for Orange II photocatalytic degradation in TiO2 aqueous suspensions, Journal of Chemical Technology and Biotechnology, 83, 1454-1465.
10. Calace N., Nardi E., Petronio B.M., Pietroletti M., Tosti G., (2003), Metal ion removal from water by sorption on paper mill sludge, Chemosphere, 51, 797-803.
11. Caliman F.A., Gavrilescu M., (2008), Sorption of cationic dyes from aqueous solution onto natural clay, Equilibrium and kinetic study, Environmental Engineering and Management Journal, 7, 301-308.
12. Calvete T., Lima E.C., Cardoso N.F., Dias S.L.P., Ribeiro E.S., (2010), Removal of brilliant green dye from aqueous solutions using home made activated carbons, CLEAN-Soil, Air, Water, 38, 521-532.
13. Dutta S., Bhattacharyya A., Ganguly A., Gupta S., Basu S. (2011), Application of Response Surface Methodology for preparation of low-cost adsorbent from citrus fruit peel and for removal of Methylene Blue, Desalination, in press.
14. El Ashtoukhy E.S.Z., (2009), Loofa egyptiaca as a novel adsorbent for removal of direct blue dye from aqueous solution, Journal of Environmental Management, 90, 2755-2761.
15. Garg U.K., Kaur M.P., Garg V.K., Sud D., (2008), Removal of Nickel (II) from aqueous solution by adsorption on agricultural waste biomass using a response surface methodological approach, Bioresource Technology, 99, 1325-133.
16. Gong R., Jin Y., Sun J., Zhong K., (2008), Preparation and utilization of rice straw bearing carboxyl groups for removal of basic dyes from aqueous solution, Dyes and Pigments, 76, 519-524.
17. Hacketta G.A.R., Eastonb C.A., Duff S.J.B., (1999), Composting of pulp and paper mill fly ash with wastewater treatment sludge, Bioresource Technology, 70, 217-224.
18. Hameed B.H., Tan I.A.W., Ahmad A.L., (2008), Optimization of basic dye removal by oil palm fibrebased activated carbon using response surface methodology, Journal of Hazardous Materials, 158, 324-332.
19. Hameed B.H., Tan I.A.W., Ahmad A.L., (2009), Preparation of oil palm empty fruit bunch-based activated carbon for removal of 2,4,6-trichlorophenol: Optimization using response surface methodology, Journal of Hazardous Materials, 164, 1316-1324.
20. Hojamberdiev M., Kameshima Y., Nakajima A., Okada K., Kadirova Z., (2008), Preparation and sorption properties of materials from paper sludge, Journal of Hazardous Materials, 151, 710-719.
21. Kannan C., Buvaneswari N., Palvannan T., (2009), Removal of plant poisoning dyes by adsorption on tomato plant root and green carbon from aqueous solution and its recovery, Desalination, 249, 1132-1138.
22. Kauspediene D., Kazlauskiene E., Gefeniene A., Binkiene R., (2010), Comparison of the efficiency of activated carbon and neutral polymeric adsorbent in removal of chromium complex dye from aqueous solutions, Journal of Hazardous Materials, 179, 933-939.
23. Khaled A., El Nemr A., El-Sikaily A., Abdelwahab O., (2009), Removal of Direct N Blue-106 from artificial textile dye effluent using activated carbon from orange peel: Adsorption isotherm and kinetic studies, Journal of Hazardous Materials, 165, 100-110.
24. Khataee A.R., Zarei M., Moradkhannejhad L., (2010), Application of response surface methodology for optimization of azo dye removal by oxalate catalyzed photoelectro-Fenton process using carbon nanotube-PTFE cathode, Desalination, 258,112-119.
25. Lucaci D., Visa M., Duta A., (2011), Wood waste for Cu2+ removal from wastewater. A comparative study, Environmental Engineering and Management Journal, 10, 169-174.
26. Méndez A., Barriga S., Fidalgo J.M., Gascó G., (2009), Adsorbent materials from paper industry waste materials and their use in Cu(II) removal from water, Journal of Hazardous Materials, 165, 736-743.
27. Mittal A., Mittal J., Malviya A., Gupta V.K., (2010), Removal and recovery of Chrysoidine Y from aqueous solutions by waste materials, Journal of Colloid Interface Science, 344, 497-507.
28. Montgomery D.C., (1996), Design and Analysis of Experiments, Fourth Ed., John Wiley and Sons, USA.
29. Mui E.L.K., Cheung W.H., Valix M., McKay G., (2010), Dye adsorption onto char from bamboo, Journal of Hazardous Materials, 177, 1001-1005.
30. Nasuha N., Hameed B.H., Azam T., Din M., (2010), Rejected tea as a potential low-cost adsorbent for the removal of methylene blue, Journal of Hazardous Materials, 175, 126-132.
31. Ofomaja A.E., Ho Y.S., (2008), Effect of temperatures and pH on methyl violet biosorption by Mansonia wood sawdust, Bioresource Technology, 99, 5411-5417.
32. Pajooheshfar S.P., Saeedi M., (2009), adsorptive removal of phenol from contaminated water and wastewater by activated carbon, almond, and walnut shells charcoal, Water Environmental Research, 81, 641-648.
33. Ravikumar K., Pakshirajan K., Swaminathan T., Balu K., (2005), Optimization of batch process parameters using response surface methodology for dye removal by a novel adsorbent, Chemical Engineering Journal, 105, 131-138.
34. Ravikumar K., Ramalingam S., Krishnan S., Balu K., (2006), Application of response surface methodology to optimize the process variables for Reactive Red and Acid Brown dye removal using a novel adsorbent, Dyes and Pigments, 70, 18-26.
35. Ravikumar K., Krishnan S., Ramalingam S., Balu K., (2007), Optimization of process variables by the application of response surface methodology for dye removal using a novel adsorbent, Dyes and Pigments, 72, 66-74.
36. Sadri Moghaddam S., Alavi Moghadam M.R., Arami M., (2010), Coagulation/flocculation process for dye removal using sludge from water treatment plant: Optimization through response surface methodology, Journal of Hazardous Materials, 175, 651-657.
37. Santos S.C.R., Vilar V.J.P., Boaventura R.A.R., (2008), Waste metal hydroxide sludge as adsorbent for a reactive dye, Journal of Hazardous Materials, 53, 999-1008.
38. Suteu D., Malutan T., Bilba D., (2010), Removal of reactive dye Brilliant Red HE-3B from aqueous solutions by industrial lignin: Equilibrium and kinetics modeling, Desalination, 255, 84-90.
39. Tan I.A.W., Ahmad A.L., Hameed B.H., (2008), Optimization of preparation conditions for activated carbons from coconut husk using response surface methodology, Chemical Engineering Journal, 137, 462-470.