Fabrication and characterization of novel SiO 2-PAMPS/PSF hybrid ultrafiltration membrane with high water flux

Desalination

Volumn 297, Issue , 2012, Pages 59-71

  Zhang, Zheng Hua ^a,b   An, Quan Fu ^a   Liu, Tao ^a   Zhou, Yong ^d   Qian, Jin Wen ^a   Gao, Cong Jie ^c,d  

^a ZHEJIANG UNIVERSITY   (China)

^b UNIVERSITY OF NEW SOUTH WALES   (Australia)

^c ZHEJIANG UNIVERSITY   (China)

^d Development Center of Water Treatment Technology   (China)

Author keywords

Hybrid ultrafiltration membrane; Polysulfone; SiO 2 PAMPS nanoparticles; Stability; Wet phase inversion

Indexed keywords

CASTING SOLUTIONS; CROSS SECTION; HIGH WATER; HYBRID NANOPARTICLE; MEMBRANE SURFACE; PHASE INVERSION; PURE WATER; SHARP INCREASE; ULTRA-FILTRATION MEMBRANES; WATER CONTACT ANGLE; WATER FLUX;

CONTACT ANGLE; CONVERGENCE OF NUMERICAL METHODS; ETHANOL; MORPHOLOGY; NANOPARTICLES; PHASE STABILITY; POLYSULFONES; SILICA; ULTRAFILTRATION;

MEMBRANES;

ETHANOL; MEMBRANE; MORPHOLOGY; POROSITY; SILICON; ULTRAFILTRATION;

EID: 84862323795     PISSN: 00119164     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.desal.2012.04.017     Document Type: Article

References (37)

1. Baker Richard W. Membrane Technology and Applications 2004, John Wiley & Sons, Ltd. Second edition.
2. Nunes S.P., Peinemann K.-V. Membrane Technology in the Chemical Industry 2001, Wiley-VCH Verlag GmbH, ISBNs: 3-527-28485-0 (Hardcover); 3-527-60038-8 (Electronic).
3. 2 Composite Ultrafiltration Membranes. J. Polym. Sci., Part B: Polym. Phys. 2006, 44:879-887.
4. 2 fillers on the morphologies and properties of polysulfone UF membranes. J. Membr. Sci. 2007, 288:231-238.
5. Toyomoto K., Higuchi A. Microfiltration and ultrafiltration. Membrane Science and Technology 1992, 289. Marcel Dekker, New York. T. Nakagawa (Ed.).
6. Kulkarni S.S., Funk E.W., Li N.N. Ultrafiltration membranes. Membrane Handbook 1992, 409. Van Nostrand Reinhold, New York. W.S.W. Ho, K.K. Sirkar (Eds.).
7. Reddy A.V.R., Mohan D.J., Bhattacharya A., Shah V.J., Ghosh P.K. Surface modification of of ultrfiltration membranes by preadsorption of a negatively charged polymer. I. Permeation of water soluble polymers and inorganic salt solutions and fouling resistance properties. J. Membr. Sci. 2003, 214:211-221.
8. Guizard C., Burggraaf A.J. Fundamentals Inorg. Membr. Sci. Technol 1996, 227. Elsevier Science & Technology Publisher.
9. Kim J., Van der Bruggen B. The use of nanoparticles and nanotubes in polymeric and ceramic membrane structures: review of envisaged performance improvements for water treatment. Environ. Pollut. 2010, 158:2335-2349.
10. He Z.J., Pinnau I., Morisato A. Nanostructured poly(4-methyl-2-pentyne)/silica hybrid membranes for gas separation. Desalination 2002, 146:11-15.
11. Arthanareeswaran G., Sriyamuna Devi T.K., Raajenthiren M. Effect of silica particles on cellulose acetate blend ultrafiltration membranes. Part I. Sep. Purif. Technol. 2008, 64:38-47.
12. Bottino G., Capannelli V., Asti D., Piaggio P. Preparation, and properties of novel organic-inorganic porous membranes. Sep. Purif. Technol. 2001, 22:269-275.
13. Yan L., La Y.S., Xiang C.B., Xianda S. Effect of nano-sized alumina particle addition of PVDF ultrafiltration membrane performance. J. Membr. Sci. 2006, 276:162-167.
14. 2 to polysulfone based UF membranes. J. Membr. Sci. 1996, 113:343-350.
15. Bottino A., Capannelli G., Comite A. Preparation and characterization of novel porous PVDF-ZrO2 composite membranes. Desalination 2002, 146:35-40.
16. 2 nanoparticle self-assembly membrane with improved fouling resistance. J. Membr. Sci. 2009, 326:659-666.
17. Xia H.S., Wang Q. Preparation of conductive polyaniline/nanosilica particle composites through ultrasonic irradiation. J. Appl. Polym. Sci. 2003, 87:1811-1817.
18. Xia H.S., Wang Q. Ultrasonic irradiation: a novel approach to prepare conductive polyaniline/nanocrystalline titanium oxide composites. Chem. Mater. 2002, 14(5):2158-2165.
19. Aerts P., Van Hoof E., Leysen R., Vankelecom I.F.J., Jacobs P.A. Polysulfone-Aerosil composite membranes Part 1. The influence of the addition of Aerosil on the formation process and membrane morphology. J. Membr. Sci. 2000, 176:63-73.
20. Arthanareeswaran G., Thanikaivelan P. Fabrication of cellulose acetate-zirconia hybrid membranes for ultrafiltration applications: Performance, structure and fouling analysis. Sep. Purif. Technol. 2010, 74:230-235.
21. Hilal N., Al-Khatib L., Atkin B.P., Kochkodan V., Potapchenko N. Photochemical modification of membrane surfaces for (bio)fouling reduction: a nano-scale study using AFM. Desalination 2003, 158:65-72.
22. Hilal N., Kochkodan V., Al-Khatib L., Levadna T. Surface modified polymeric membranes to reduce (bio)fouling: a microbiological study using E. coli. Desalination 2004, 167:293-300.
23. Park Jane Y., Acar Metin H., Akthakul A., Kuhlman W., Mayes Anne M. Polysulfone-graft-poly(ethylene glycol) graft copolymers for surface modification of polysulfone membranes. Biomaterials 2006, 27(6):856-865.
24. Zhang Z.H., An Q.F., Ji Y.L., Qian J.W., Gao C.J. Effect of zero shear viscosity of the casting solution on the morphology and permeability of polysulfone membrane prepared via the phase-inversion process. Desalination 2010, 260:43-50.
25. Shin S.J., Kim J.P., Kim H.J., Jeon J.H., Min B.R. Preparation and characterization of polyethersulfone microfiltration membranes by a 2-methoxyethanol additive. Desalination 2005, 186:1-10.
26. Laninovic V. Relationship between type of non-solvent additive and properties of polyethersulfone membranes. Desalination 2005, 186:39-46.
27. Li Z.S., Jiang C.Z. Investigation of the dynamics of poly(ether sulfone) membrane formation by immersion precipitation. J. Polym. Sci., Part B: Polym. Phys. 2005, 43:489-510.
28. Xu Z.L., Qusay F.A. Polyethersulfone (PES) hollow fiber ultrafiltration membranes prepared by PES/non-solvent/NMP solution. J. Membr. Sci. 2004, 233:101-111.
29. Mulder M. Basic Principles of Membrane Technology 1997, 170-172. Kluwer Academic Publishers.
30. Ye L.B., Fan Z.J., Zhou J.X. Comparison between two methods for determination of pore size of membrane. Sci. Technol. Membr. Sep. 1981, 1:24-30.
31. Ye L.B. The orthogonal model of membrane pore structure. Technol. Water Treat. 1981, 7:11-17.
32. Du B.Y., Cao Z., Li Z.B., Mei A.X., Zhang X.H., Nie J.J., Xu J.T., Fan Z.Q. One-pot preparation of hollow silica spheres by using thermosensitive poly(n-isopropylacrylamide) as a reversible template. Langmuir 2009, 25(20):12367-12373.
33. Mulder M. Basic Principles of Membrane Technology 1997, 123-129. Kluwer Academic Publishers.
34. Smolders C.A., Reuvers A.J., Boom R.M. Microstructures in phase-inversion membranes, Part 1: Formation of macrovoids. J. Membr. Sci. 1992, 73:259-275.
35. Yuan Y.M., Shoichet Molly S. Surface enrichment of poly(trifluorovinyl ether)s in polystyrene blends. Macromolecules 2000, 33:4926-4931.
36. Baradie B., Shoichet Molly S. Insight into the surface properties of fluorocarbon-vinyl acetate copolymer films and blends. Macromolecules 2003, 36:2343-2348.
37. Chen N.P., Hong L. Surface phase morphology and composition of the casting films of PVDF-PVP blend. Polymer 2002, 43:1429-1436.