Hydrodynamic viability of chemical looping processes by means of cold flow model investigation

Applied Energy

Volumn 97, Issue , 2012, Pages 201-216

  Bischi, Aldo ^a   Langørgen, Øyvind ^b   Morin, Jean Xavier ^c   Bakken, Jørn ^b   Ghorbaniyan, Masoud ^a   Bysveen, Marie ^b   Bolland, Olav ^a  

^a NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

^b SINTEF ENERGY RESEARCH   (Norway)

^c CO2 H2 Eurl ^*  (France)

Author keywords

Carbon capture and storage; Chemical looping combustion; Circulating fluidized bed; Cold flow model; Hydrodynamics; Scaling

Indexed keywords

CARBON CAPTURE; DESIGN; HYDRODYNAMICS;

CARBON CAPTURE AND STORAGE; CHEMICAL LOOPING COMBUSTION; CIRCULATING FLUIDIZED BED; COLD FLOW MODELS; SCALING;

REFORMING REACTIONS;

CARBON SEQUESTRATION; COMBUSTION; DESIGN METHOD; ELECTRICITY GENERATION; EQUIPMENT; FEASIBILITY STUDY; FLOW MODELING; HIGH TEMPERATURE; HYDRODYNAMICS; MODEL TEST; OPERATIONS TECHNOLOGY;

EID: 84862313871     PISSN: 03062619     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apenergy.2011.12.051     Document Type: Article

References (43)

1. Som S.K., Datta A. Thermodynamic irreversibilities and exergy balance in combustion processes. Prog Energy Combust 2008, 34(3):351-376.
2. 2 control technologies and policies in China. Sci China Ser E 2008, 51(7):857-870.
3. Hurst S. Production of hydrogen by the steam-iron method. J Am Oil Chem Soc 1939, 16(2):29-35.
4. Lewis WK, Gilliland ER. Production of pure carbon dioxide. US Patent No. 2665971; 1954.
5. Richter HJ, Knoche KF. Reversibility of combustion processes. In: Gaggioli RA, editor. ACS Symposium Series 235. Washington DC, USA; 1983. p. 71-85.
6. Ishida M., Zheng D., Akehata T. Evaluation of a chemical-looping-combustion power-generation system by graphic exergy analysis. Energy 1987, 12(2):147-154.
7. ENCAP Deliverable D1.2.6. Power systems evaluation and benchmarking. Public version, URL; 2009. http://www.encapco2.org.
8. Adánez J. Oxygen carrier materials for chemical-looping processes - fundamentals. In: 1st international conference on Chemical Looping, Lyon, France; 2010. http://www.ifp.com/actualites/evenements/congres-etconferences/organises-par-ifp-energies-nouvelles/rs-chemical-looping.
9. th double loop circulating fluidized bed reactor system for chemical looping combustion with focus on industrial applicability and pressurization. Int J Greenh Gas Con 2011, 5(3):467-474.
10. Pröll T., Kolbitsch P., Bolhàr-Nordenkampf J., Hofbauer H. A novel dual circulating fluidized bed system for chemical looping processes. AIChE J 2009, 55(12):3255-3266.
11. Basu P., Chandel M., Butler J., Dutta A. An investigation into the operation of the twin-exit loop-seal of a circulating fluidized bed boiler in a thermal power plant and its design implication. J Energy Resour - ASME 2009, 131(041401):1-8.
12. Bidwe AR, Dominguez-Mendoza MA, Hawthorne C, Dieter H, Charitos A, Shuster A, et al. Cold model investigations of a high temperature looping process in a dual circulating fluidized bed system. In: Tenth international conference on circulating fluidized beds and fluidization technology, Sunriver, Oregon, USA; 2011. p. 137-44.
13. Geldart D. Types of gas fluidization. Powder Technol 1973, 7(5):285-292.
14. Grace J.R., Knowlton T.M., Avidan A.A. Circulating fluidized beds 1997, Blackie academic & professional, London, UK.
15. Wu R.L., Lim C.J., Chaouki J., Grace J.R. Heat transfer from a circulating fluidized bed to membrane waterwall surfaces. AIChE J 1987, 33(11):1888-1893.
16. Rifflart S., Hoteit A., Yazdanpanah M.M., Pelletant W., Surla K. Construction and operation of a 10kW CLC unit with circulation configuration enabling independent solid flow control. Energy Procedia 2011, 4:333-340.
17. Pröll T., Bolhàr-Nordenkampf J., Kolbitsch P., Hofbauer H. Syngas and a separate nitrogen/argon stream via chemical looping reforming - a 140kW pilot plant study. Fuel 2010, 89(6):1249-1256.
18. Glicksman L.R., Hyre M.R., Farrel P.A. Dynamic similarity in fluidization. Int J Multiphas Flow 1994, 20(Suppl. 1):331-386.
19. Glicksman L.R., Hyre M., Woloshun K. Simplified scaling relationships for fluidized beds. Powder Technol 1993, 77(2):177-199.
20. Johansson E., Lyngfelt A., Mattisson T., Johnsson F. Gas leakage measurements in a cold model of an interconnected fluidized bed for chemical-looping combustion. Powder Technol 2003, 134(3):210-217.
21. Pröll T., Ruspanovits K., Kolbitsch P., Bolhàr-Nordenkampf J., Hofbauer H. Cold flow model study on a dual circulating fluidized bed system for chemical looping processes. Chem Eng Technol 2009, 32(3):418-424.
22. Knowlton T.M., Karri S.B.R., Issangya A. Scale-up of fluidized-bed hydrodynamics. Powder Technol 2005, 150(2):72-77.
23. Andrus HE, Burns G, Chiu JH, Liljedahl GN, Stromberg PT, Thibeault PR. Hybrid combustion-gasification chemical looping, coal power technology development phase III - final report. ALSTOM Technical DOE report for project DE-FC26-03NT41866; 2008.
24. Rizeq G, West J, Frydman A, Subia R, Zamansky V, Loreth H, et al. Fuel-flexible gasification-combustion technology for production of H2 and sequestration-ready CO2. GE EER technical DOE report for project DE-FC26-00FT40974; 2002.
25. Basu P. Combustion and gasification in fluidized beds 2005, Taylor & Francis, Boca Raton, Florida, USA.
26. Lim K.S., Zhu J.X., Grace J.R. Hydrodynamics of gas-solid fluidization. Int J Multiphase Flow 1995, 21(1):141-193.
27. de Vos W., Nicol W., du Toit E. Entrainment behaviour of high-density Geldart A powders with different shapes. Powder Technol 2009, 190(3):297-303.
28. Beckman Coulter LS230. Laser diffraction particle size analyser, http://www.beckmancoulter.com/wsrportal/bibliography?docname=br-10.pdf.
29. ASTM. Standard practices for sampling metal powders. B 215-08. ASTM International, West Conshohocken, PA, USA; 2008.
30. Bischi A., Langørgen Ø, Morin J.X., Bakken J., Ghorbaniyan M., Bysveen M., et al. Performance analysis of the cold flow model of a second generation chemical looping combustion reactor system. Energy Procedia 2011, 4:449-456.
31. Issangya A.S., Bai D., Bi H.T., Lim K.S., Zhu J., Grace J.R. Suspension densities in a high-density circulating fluidized bed riser. Chem Eng Sci 1999, 54(22):5451-5460.
32. Louge M., Chang H. Pressure and voidage gradients in vertical gas-solids risers. Powder Technol 1990, 60(2):197-201.
33. Monazam E.R., Shadle L.J. A transient method for characterizing flow regimes in a circulating fluid bed. Powder Technol 2004, 139(1):89-97.
34. VGB PowerTech. Gas distributor plates in fluidized bed systems. In: VGB PowerTech Service GmbH. Essen, Germany; 1994.
35. Steam/its generation and use 1995, The Babcock and Wilcox company, Barberton Ohio, USA. 41st ed. J.B. Kitto, S.C. Stultz (Eds.).
36. Muschelknautz U, Muschelknautz E. Special design of inserts and short entrance ducts to recirculating cyclones. In: Kwauk M, Li J, editors. Circulating Fluidized Bed Technology V. People's Republic of China, Beijing; 1996. p. 597-602.
37. Lackermeier U., Werther J. Flow phenomena in the exit zone of a circulating fluidized bed. Chem Eng Process 2002, 41(9):771-/783.
38. Schlichthaerle P., Werther J. Axial pressure profiles and solids concentration distributions in the CFB bottom zone. Chem Eng Sci 1999, 54(22):5485-5493.
39. Consonni S, Lozza G, Pelliccia G, Rossini S, Saviano F. Chemical-looping combution for combined cycles with CO2 capture. In: Proceedings of ASME turbo expo 2004 power for land, sea, and air. Vienna, Austria; 2004.
40. Marx K, Pröll T, Hofbauer H. Design requirements for pressurized chemical looping reforming. In: Tenth international conference on circulating fluidized beds and fluidization technology, Sunriver, Oregon, USA; 2011. p. 345-52.
41. 2) for chemical-looping combustion. Energy Fuel 2007, 21(4):1843-1853.
42. Xiao R., Song Q., Song M., Lu Z., Zhang S., Shen L. Pressurized chemical-looping combustion of coal with an iron ore-based oxygen carrier. Combust Flame 2010, 157(6):1140-1153.
43. Rydén M, Lyngfelt A. Hydrogen and power production with integrated carbon dioxide capture by chemical-looping reforming. In: Rubin ES, Keilh DW, Gilboy CF, editors. Greenhouse Gas Control Technologies 7, vol. 1; 2005. p. 125-34.