A study of performance output of a multivane air engine applying optimal injection and vane angles

International Journal of Rotating Machinery

Volumn 2012, Issue , 2012, Pages

  Singh, Bharat Raj ^a   Singh, Onkar ^b  

^a SMS Institute of Technology   (India)

^b HARCOURT BUTLER TECHNOLOGICAL INSTITUTE   (India)

Author keywords

[No Author keywords available]

Indexed keywords

AIR CONSUMPTION; DIAMETER RATIO; INJECTION PRESSURES; LINEAR EXPANSIONS; MAXIMUM POWER OUTPUT; MECHANICAL MOTIONS; OPTIMAL INJECTION; PERFORMANCE EFFICIENCY; PERFORMANCE EVALUATION; POTENTIAL POWER SOURCES; SPEED OF ROTATION;

COMPRESSED AIR; INTERNAL COMBUSTION ENGINES; MATHEMATICAL MODELS; OPTIMIZATION; PRESSURE VESSELS;

AIR ENGINES;

EID: 84862300079     PISSN: 1023621X     EISSN: 15423034     Source Type: Journal    
DOI: 10.1155/2012/578745     Document Type: Article

References (51)

1. Hubbert M. K., Nuclear energy and the fossil fuels Proceedings of the Spring Meeting 1956 San Antonio, Tex, USA American Petroleum Institute 7 25 Drilling and Production Practice
2. Aleklett K., Campbell C. J., The peak and decline of world oil and gas production Minerals and Energy, Raw Materials Report 2003 18 1 5 20 (Pubitemid 37164238)
3. Singh B. R., Singh O., Use of non-conventional energy for sustainability to fossil fuel Proceedings of the RAME National Conference on Recent Trend on Mechanical Engineering March 2007 Baba Sahab Dr. Bhim Rao Ambedkar College of Agricultural Engineering and Technology 130 136 Etawah-Proceedings
4. Singh B. R., Singh O., Uses of wind power as a non-conventional/renewable energy for sustainability Proceedings of the STEM National Conference on State of Art Technology in Mechanical Engineering October 2007 Pant Nagar, India College of Technology, G.B. Pant University 503 515 UP-Proceedings
5. Honton E. J., Hydrogen fuel cell car Proceedings of the 15th Annual US Conference and Hydrogen Expo April 2004 Los Angeles, Calif, USA
6. Robert R., Vincent W. J., Fuel Cell Vehicle World Survey 2003 2004 Washington, DC, USA Breakthrough Technologies Institute
7. Singh B. R., Singh O., Necessity and potential for bio-diesel use in India Proceedings of the International Conference on Bio-Fuel Vision-2015 October 2006 Bikaner, India 71 89
8. Singh B. R., Singh O., Study of compressed air as an alternative to fossil fuel for automobile engines Proceedings of the International Conference on Challenges and Strategies for Sustainable Energy and Environment June 2006 Lucknow, India 179 191 UP-Proceedings
9. Singh B. R., Singh O., A study on sustainable energy sources and its conversion systems towards development of an efficient zero pollution novel turbine to be used as prime-mover to the light vehicle Proceedings of the ASME International Mechanical Engineering Congress and Exposition (IMECE 08) Boston, Mass, USA. Paper no. IMECE-2008-66803, October 2008
10. Guy N., Cyril N., Compressed airthe most sustainable energy carrier for community vehicles. Speech in front of assembly at Kultur gathered for Fuel Cells World 2004
11. Saint Hilaire G., Saint Hilaire R., Saint Hilaire Y., Quasiturbine zero pollution car using gasoline. Festival at Le Lundi, Montreal Gazette, September 2005
12. Singh B. R., Singh O., Development of a vaned type novel air turbine International Journal of Mechanical Engineering Science 2008 222 12 2419 2426
13. Badr O., O'Callaghan P. W., Hussein M., Probert S. D., Multi-vane expanders as prime movers for low-grade energy organic rankine-cycle engines Applied Energy 1984 16 2 129 146 (Pubitemid 14531057)
14. Badr O., O'Callaghan P. W., Probert S. D., Multi-vane expander performance: breathing characteristics Applied Energy 1985 19 4 241 271 (Pubitemid 15477265)
15. Badr O., Probert S. D., O'Callaghan P. W., Multi-vane expanders: vane dynamics and friction losses Applied Energy 1985 20 4 253 285 (Pubitemid 15548801)
16. Badr O., O'Callaghan P. W., Probert S. D., Multi-vane expanders: geometry and vane kinematics Applied Energy 1985 19 3 159 182 (Pubitemid 15461382)
17. Badr O., Probert S. D., O'Callaghan P. W., Multi-vane expanders: internal-leakage losses Applied Energy 1985 20 1 1 46
18. Badr O., Probert S. D., O'Callaghan P. W., Performances of multi-vane expanders Applied Energy 1985 20 3 207 234
19. Badr O., Probert S. D., O'Callaghan P. W., Influences of vane design and lubricant on a multi-vane expander's performance Applied Energy 1986 22 4 271 298
20. Badr O., Probert S. D., O'Callaghan P. W., Optimal design and operating conditions for a multi-vane expander Applied Energy 1986 24 1 1 27 (Pubitemid 16611035)
21. Badr O., Probert D., O'Callaghan P. W., Selection of operating conditions and optimisation of design parameters for multi-vane expanders Applied Energy 1986 23 1 1 46 (Pubitemid 16568744)
22. Yang B., Peng X., He Z., Guo B., Xing Z., Experimental investigation on the internal working process of a CO 2 rotary vane expander Applied Thermal Engineering 2009 29 11-12 2289 2296
23. Huang K. D., Tzeng S. C., Development of a hybrid pneumatic-power vehicle Applied Energy 2005 80 1 47 59 (Pubitemid 39342468)
24. Huang K. D., Tzeng S. C., Ma W. P., Chang W. C., Hybrid pneumatic-power system which recycles exhaust gas of an internal-combustion engine Applied Energy 2005 82 2 117 132
25. David Huang K., Quang K. V., Tseng K. T., Study of recycling exhaust gas energy of hybrid pneumatic power system with CFD Energy Conversion and Management 2009 50 5 1271 1278
26. David Huang K., Quang K. V., Tseng K. T., Study of the effect of contraction of cross-sectional area on flow energy merger in hybrid pneumatic power system Applied Energy 2009 86 10 2171 2182
27. van Antwerpen H. J., Greyvenstein G. P., Use of turbines for simultaneous pressure regulation and recovery in secondary cooling water systems in deep mines Energy Conversion and Management 2005 46 4 563 575
28. Wei D., Lu X., Lu Z., Gu J., Performance analysis and optimization of organic rankine cycle (ORC) for waste heat recovery Energy Conversion and Management 2007 48 4 1113 1119 (Pubitemid 46283129)
29. Tournier J. M., El-Genk M. S., Axial flow, multi-stage turbine and compressor models Energy Conversion and Management 2010 51 1 16 29
30. Yang B., Peng X., He Z., Guo B., Xing Z., Experimental investigation on the internal working process of a CO 2 rotary vane expander Applied Thermal Engineering 2009 29 11-12 2289 2296
31. Nickl J., Will G., Quack H., Kraus W. E., Integration of a three-stage expander into a CO 2 refrigeration system International Journal of Refrigeration 2005 28 8 1219 1224 (Pubitemid 41773406)
32. Subiantoro A., Ooi K. T., Analytical study of the endface friction of the revolving vane mechanism International Journal of Refrigeration 2011 34 5 1276 1285
33. Shen Y. T., Hwang Y. R., Design and implementation of an air-powered motorcycles Applied Energy 2009 86 7-8 1105 1110
34. Singh B. R., Singh O., A concept for development of a vaned type novel air turbine Proceedings of the 12th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC '08) Honolulu, Hawaii, USA Pacific Center of Thermal-Fluids Engineering, Sheraton Mohana Surfrider Hotel. Paper no. ISROMAC-12-20046, February 2008
35. Singh B. R., Singh O., Energy storage system to meet challenges of 21st centuryan overview Proceedings of the All India Seminar on Energy Management in Perceptive of Indian Scenario October 2008 Lucknow, India chapter 15 Institution of Engineer, State Centre, Engineer's Bhawan 157 167 Lucknow-Proceedings
36. Singh B. R., Singh O., A study to optimize the output of vaned type novel air turbine Proceedings of the 4th International Conference on Energy Research and Development (ICERD '08) State of Kuwait, Kuwait. Paper no. ICERD-4-1353, November 2008
37. Singh B. R., Singh O., Parametric evaluation of vane angle on performance of novel air turbine SITM Journal of Science, Engineering and Management 2008 2 7 18
38. Singh B. R., Singh O., Analytical study on a vaned type novel air turbine for different conditions of casing and rotor diameters 1 Proceedings of the ASME International Conference on Energy Sustainability (ES '09) San Francisco, Calif, USA 699 706. Paper no. ES2009-90207, July 2009
39. Singh B. R., Singh O., Applications of compressed air as an alternative energy to meet challenges of 21st centuryglobal warming Proceedings of the International Conference on Engineering Congress on Alternatives Energy Applications: Option or Necessity? (EC '09) State of Kuwait, Kuwait. Paper no. EC2009-1082, November 2009
40. Singh B. R., Singh O., Parametric evaluations of injection angles and vane angles on performance of a vaned type novel air turbine International Journal of Engineering and Physical Sciences 2009 3 4 226 233
41. Singh B. R., Singh O., Optimization of power output of a vaned type novel air turbine with respect to different injection angles-under ideal adiabatic expansion The International Journal of Manufacturing Excellence 2009 2 2 205 211
42. Singh B. R., Singh O., Numerical analysis of pressure admission angle to vane angle ratios on performance of a vaned type novel air turbine International Journal of Engineering and Applied Sciences 2010 6 2 94 101
43. Singh B. R., Singh O., Theoretical investigations on different casing and rotor diameters ratio to optimize shaft output of a vaned type air turbine International Journal of Engineering and Applied Sciences 2010 6 2 102 109
44. Singh B. R., Singh O., Effect of rotor to casing ratios with different rotor vanes on performance of shaft output of a vane type novel air turbine International Journal of Engineering and Applied Sciences 2010 6 4 217 222
45. Singh B. R., Singh O., Effect of different vane angle on rotorcasing diameter ratios to optimize the shaft output of a vaned type novel air turbine International Journal of Engineering Science and Technology 2010 2 3 114 121
46. Singh B. R., Singh O., Study of effect of injection angle to rotor-casing diameter ratios on performance of a vaned type novel air turbine International Journal of Engineering Science and Technology 2010 2 4 409 417
47. Singh B. R., Singh O., Critical effect of rotor vanes with different injection angles on performance of a vaned type novel air turbine International Journal of Engineering Science and Technology 2010 2 2 118 123
48. Singh B. R., Singh O., Study of influence of vane angle on shaft output of a multi vane air turbine International Journal of Renewable and Sustainable Energy 2010 2 3 033101 033116
49. Singh B. R., Singh O., Analytical investigations on different air injection angles to optimize power output of a vaned type air turbine Internatinal Journal of Power and Energy 2010 224 3 305 312
50. Singh B. R., Singh O., Study of effect of rotor vanes to rotor-casing dimensions on performance of a zero pollution vane type novel air turbine International Journal of the Physical Sciences 2010 5 5 547 556
51. Singh O., Reciprocating and rotary compressor Applied Thermodynamics 2009 New Delhi, India New Age International 797 798