Comparative properties of cellulose nano-crystals from native and mercerized cotton fibers

Cellulose

Volumn 19, Issue 4, 2012, Pages 1173-1187

  Yue, Yiying ^a   Zhou, Chengjun ^a   French, Alfred D ^b   Xia, Guan ^a   Han, Guangping ^c   Wang, Qingwen ^c   Wu, Qinglin ^a  

^a LOUISIANA STATE UNIVERSITY AGRICULTURAL CENTER   (United States)

^b AGRICULTURAL RESEARCH SERVICE   (United States)

^c NORTHEAST FORESTRY UNIVERSITY   (China)

Author keywords

Acid hydrolysis; Cellulose nano crystals; Composites; High pressure homogenization; Mercerization

Indexed keywords

ACID HYDROLYSIS; AQUEOUS SUSPENSIONS; BULK DENSITY; CELLULOSE II; CONCENTRATION LEVELS; ELONGATION AT BREAK; FOURIER TRANSFORM INFRARED SPECTROMETRY; HIGH PRESSURE HOMOGENIZATION; PROCESSING CONDITION; REDUCED LENGTH; ROD-LIKE CRYSTAL; TEMPERATURE INCREASE; WIDE-ANGLE X-RAY DIFFRACTION;

CELLULOSE; COMPOSITE MATERIALS; COTTON FIBERS; FOURIER TRANSFORM INFRARED SPECTROSCOPY; HYDROLYSIS; MERCERIZATION; POLYETHYLENE OXIDES; SULFURIC ACID; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION;

SUSPENSIONS (FLUIDS);

ACIDS; CELLULOSE; COMPOSITES; COTTON; CRYSTALS; HYDROLYSIS; MERCERIZATION; POLYETHYLENE OXIDE; SULFURIC ACID; TRANSMISSION ELECTRON MICROSCOPY; X RAY DIFFRACTION;

EID: 84862248163     PISSN: 09690239     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10570-012-9714-4     Document Type: Article

References (47)

1. Abidi N, Hequet E, Cabrales L (2010) Changes in sugar composition and cellulose content during the secondary cell wall biogenesis in cotton fibers. Cellulose 17(1): 153-160. doi: 10. 1007/s10570-009-9364-3.
2. Ahn KH, Osaki K (1994) A network model for predicting the shear thickening behavior of a Poly(Vinyl Alcohol) sodium-borate aqueous-solution. J Non-Newton Fluid 55(3): 215-227.
3. Atalla RH, VanderHart DL (1984) Native cellulose: a composite of two distinct crystalline forms. Science 223: 283-285.
4. Benchabane A, Bekkour K (2008) Rheological properties of carboxymethyl cellulose (CMC) solutions. Colloid Polym Sci 286(10): 1173-1180. doi: 10. 1007/s00396-008-1882-2.
5. Brownsey GJ, Ridout MJ (1985) Rheological characterization of microcrystalline cellulose dispersions: Avicel Rc 591. J Food Technol 20(2): 237-243.
6. Chang PR, Ai FJ, Chen Y, Dufresne A, Huang J (2009) Effects of starch nanocrystal-graft-polycaprolactone on mechanical properties of waterborne polyurethane-based nanocomposites. J Appl Polym Sci 111(2): 619-627. doi: 10. 1002/App. 29060.
7. Chen X, Zhang YM, Cheng LY, Wang HP (2009) Rheology of concentrated cellulose solutions in 1-butyl-3-methylimidazolium chloride. J Polym Environ 17(4): 273-279. doi: 10. 1007/s10924-009-0149-4.
8. Ciacco GT, Morgado DL, Frollini E, Possidonio S, El Seoud OA (2010) Some aspects of acetylation of untreated and mercerized sisal cellulose. J Braz Chem Soc 21(1): 71-77.
9. Das M, Chakraborty D (2006) Influence of alkali treatment on the fine structure and morphology of bamboo fibers. J Appl Polym Sci 102(5): 5050-5056. doi: 10. 1002/App. 25105.
10. Deguchi S, Kuroda K, Akiyoshi K, Lindman B, Sunamoto J (1999) Gelation of cholesterol-bearing pullulan by surfactant and its rheology. Colloid Surface A 147(1-2): 203-211.
11. Dinand E, Chanzy H, Vignon MR (1996) Parenchymal cell cellulose from sugar beet pulp: preparation and properties. Cellulose 3(3): 183-188.
12. Dinand E, Vignon M, Chanzy H, Heux L (2002) Mercerization of primary wall cellulose and its implication for the conversion of cellulose I -< cellulose II. Cellulose 9(1): 7-18.
13. Dong XM, Kimura T, Revol JF, Gray DG (1996) Effects of ionic strength on the isotropic-chiral nematic phase transition of suspensions of cellulose crystallites. Langmuir 12(8): 2076-2082.
14. El-Wakil NA, Hassan ML (2008) Structural changes of regenerated cellulose dissolved in FeTNa, NaOH/thiourea, and NMMO systems. J Appl Polym Sci 109(5): 2862-2871. doi: 10. 1002/App. 28351.
15. Gatenholm P, Klemm D (2010) Bacterial nanocellulose as a renewable material for biomedical applications. MRS Bull 35(3): 208-213.
16. George J, Ramana KV, Sabapathy SN, Jagannath JH, Bawa AS (2005) Characterization of chemically treated bacterial (Acetobacter xylinum) biopolymer: some thermo-mechanical properties. Int J Biol Macromol 37(4): 189-194. doi: 10. 1016/j. ijbiomac. 2005. 10. 007.
17. Gwon JG, Lee SY, Doh GH, Kim JH (2010) Characterization of chemically modified wood fibers using FTIR spectroscopy for biocomposites. J Appl Polym Sci 116(6): 3212-3219. doi: 10. 1002/App. 31746.
18. Habibi Y, Lucia LA, Rojas OJ (2010) Cellulose nanocrystals: chemistry, self-assembly, and applications. Chem Rev 110(6): 3479-3500. doi: 10. 1021/cr900339w.
19. Hirota M, Tamura N, Saito T, Isogai A (2010) Water dispersion of cellulose II nanocrystals prepared by TEMPO-mediated oxidation of mercerized cellulose at pH 4. 8. Cellulose 17(2): 279-288. doi: 10. 1007/s10570-009-9381-2.
20. Krebs FC (2008) Degradation and stability of polymer and organic solar cells. Sol Energy Mater Sol Cells 92(7): 685. doi: 10. 1016/j. solmat. 2008. 01. 016.
21. KroonBatenburg LMJ, Kroon J (1997) The crystal and molecular structures of cellulose I and II. Glycoconjugate J 14(5): 677-690.
22. Kundu PP, Singh RP (2008) Effect of addition of surfactants on the rheology of gels from methylcellulose in N, N-dimethylformamide. J Appl Polym Sci 108(3): 1871-1879. doi: 10. 1002/App. 27839.
23. Langan P, Nishiyama Y, Chanzy H (1999) A revised structure and hydrogen-bonding system in cellulose II from a neutron fiber diffraction analysis. J Am Chem Soc 121(43): 9940-9946.
24. Langan P, Nishiyama Y, Chanzy H (2001) X-ray structure of mercerized cellulose II at 1 angstrom resolution. Biomacromolecules 2(2): 410-416. doi: 10. 1021/mb005612q.
25. Liu YP, Hu H (2008) X-ray diffraction study of bamboo fibers treated with NaOH. Fiber Polym 9(6): 735-739. doi: 10. 1007/s12221-008-0115-0.
26. Liu XX, Khor S, Petinakis E, Yu L, Simon G, Dean K, Bateman S (2010) Effects of hydrophilic fillers on the thermal degradation of poly(lactic acid). Thermochim Acta 509(1-2): 147-151. doi: 10. 1016/j. tca. 2010. 06. 015.
27. Lu P, Hsieh YL (2010) Preparation and properties of cellulose nanocrystals: rods, spheres, and network. Carbohyd Polym 82(2): 329-336. doi: 10. 1016/j. carbpol. 2010. 04. 073.
28. Mansikkamaki P, Lahtinen M, Rissanen K (2005) Structural changes of cellulose crystallites induced by mercerisation in different solvent systems; determined by powder X-ray diffraction method. Cellulose 12(3): 233-242. doi: 10. 1007/s10570-004-3132-1.
29. Nishiyama Y, Sugiyama J, Chanzy H, Langan P (2003) Crystal structure and hydrogen bonding system in cellulose 1(alpha), from synchrotron X-ray and neutron fiber diffraction. J Am Chem Soc 125(47): 14300-14306. doi: 10. 1021/Ja037055w.
30. Nishiyama Y, Johnson GP, French AD, Forsyth VT, Langan P (2008) Neutron crystallography, molecular dynamics, and quantum mechanics studies of the nature of hydrogen bonding in cellulose I-beta. Biomacromolecules 9(11): 3133-3140. doi: 10. 1021/Bm800726v.
31. Oh SY, Yoo DI, Shin Y, Seo G (2005) FTIR analysis of cellulose treated with sodium hydroxide and carbon dioxide. Carbohyd Res 340(3): 417-428. doi: 10. 1016/j. carres. 2004. 11. 027.
32. Park JM, Kim SJ, Jang JH, Wang ZJ, Kim PG, Yoon DJ, Kim J, Hansen G, DeVries KL (2008) Actuation of electrochemical, electro-magnetic, and electro-active actuators for carbon nanofiber and Ni nanowire reinforced polymer composites. Compos Part B-Eng 39(7-8): 1161-1169. doi: 10. 1016/j. compositesb. 2008. 03. 009.
33. Paszner L (1968) Effect of inter- and intra-crystalline swelling on cellulose degradation by gamma-rays. Svensk Papperstidning-Nordisk Cellulosa 71(22): 822.
34. Ray D, Sarkar BK (2001) Characterization of alkali-treated jute fibers for physical and mechanical properties. J Appl Polym Sci 80(7): 1013-1020.
35. Revol JF, Goring DAI (1981) On the mechanism of the mercerization of cellulose in wood. J Appl Polym Sci 26(4): 1275-1282.
36. Sauperl O, Stana-Kleinschek K, Ribitsch V (2009) Cotton cellulose 1, 2, 3, 4 buthanetetracarboxylic acid (BTCA) crosslinking monitored by some physical-chemical methods. Text Res J 79(9): 780-791. doi: 10. 1177/0040517508096222.
37. Schwanninger M, Rodrigues JC, Pereira H, Hinterstoisser B (2004) Effects of short-time vibratory ball milling on the shape of FT-IR spectra of wood and cellulose. Vib Spectrosc 36(1): 23-40. doi: 10. 1016/j. vibspec. 2004. 02. 003.
38. Shibazaki H, Kuga S, Okano T (1997) Mercerization and acid hydrolysis of bacterial cellulose. Cellulose 4(2): 75-87.
39. Uskokovic V (2008) Composites comprising cholesterol and carboxymethyl cellulose. Colloids Surf B 61(2): 250-261. doi: 10. 1016/j. colsurfb. 2007. 08. 014.
40. Wang N, Ding EY, Cheng RS (2007) Thermal degradation behaviors of spherical cellulose nanocrystals with sulfate groups. Polymer 48(12): 3486-3493. doi: 10. 1016/j. polymer. 2007. 03. 062.
41. Wu JJ, Liang SM, Dai HJ, Zhang XY, Yu XL, Cai YL, Zheng LN, Wen N, Jiang B, Xu J (2010) Structure and properties of cellulose/chitin blended hydrogel membranes fabricated via a solution pre-gelation technique. Carbohyd Polym 79(3): 677-684. doi: 10. 1016/j. carbpol. 2009. 09. 022.
42. Yasuda K, Saito M, Kamide K (1993) Flow birefringence and viscosity of cellulose solutions in semidilute regime. Polym Int 30(3): 393-400.
43. Zhang JG, Elder TJ, Pu YQ, Ragauskas AJ (2007) Facile synthesis of spherical cellulose nanoparticles. Carbohyd Polym 69(3): 607-611. doi: 10. 1016/j. carbpol. 2007. 01. 019.
44. Zhou CJ, Chu R, Wu R, Wu QL (2011a) Electrospun polyethylene oxide/cellulose nanocrystal composite nanofibrous mats with homogeneous and heterogeneous microstructures. Biomacromolecules 12(7): 2617-2625. doi: 10. 1021/Bm200401p.
45. Zhou CJ, Wu QL, Yue YY, Zhang QG (2011b) Application of rod-shaped cellulose nanocrystals in polyacrylamide hydrogels. J Colloid Interf Sci 353(1): 116-123. doi: 10. 1016/j. jcis. 2010. 09. 035.
46. Zhou CJ, Wu QL, Zhang QG (2011c) Dynamic rheology studies of in situ polymerization process of polyacrylamide-cellulose nanocrystal composite hydrogels. Colloid Polym Sci 289(3): 247-255. doi: 10. 1007/s00396-010-2342-3.
47. Zivanovic S, Li JJ, Davidson PM, Kit K (2007) Physical, mechanical, and antibacterial properties of chitosan/PEO blend films. Biomacromolecules 8(5): 1505-1510. doi: 10. 1021/Bm061140p.