Modeling the effect of compacted graphite iron microstructure on cutting forces and tool wear

CIRP Journal of Manufacturing Science and Technology

Volumn 5, Issue 2, 2012, Pages 87-101

  Mohammed, Walid M ^a   Ng, E ^a   Elbestawi, M A ^a  

^a MCMASTER UNIVERSITY   (Canada)

Author keywords

Compacted graphite iron; Cutting forces; Finite element; Machining; Tool wear

Indexed keywords

CHIP FORMATIONS; COHESIVE ZONE ELEMENT; COMPACTED GRAPHITE IRON; CUTTING FORCES; CUTTING SPEED; CUTTING TEMPERATURE; FEED-RATES; FINITE ELEMENT; FINITE ELEMENT FORMULATIONS; FINITE ELEMENT MODELS; FINITE ELEMENT PACKAGES; ITERATIVE INTERACTION; MACHINED CHIP; MACHINING CONDITIONS; METALLURGICAL EXAMINATION; METALLURGICAL INVESTIGATION; MODEL INPUTS; MODELING TECHNIQUE; OPTIMIZATION TECHNIQUES; TEMPERATURE TRENDS; TOOL MATERIAL SELECTION; TOOL WEAR; TOOL WEAR MECHANISM;

GRAPHITE; IRON; MACHINING; MECHANICAL PROPERTIES; METALLURGY; MICROSTRUCTURE; TRIBOLOGY; WEAR OF MATERIALS;

CUTTING;

EID: 84862169700     PISSN: 17555817     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.cirpj.2012.03.002     Document Type: Article

References (57)

1. Voigt R.C., Holmgren S.D. Crack Initiation and Propagation in Gray and Compacted Graphite Iron (CG) Cast Irons 1990, Transactions of the American Foundary's Society, pp. 213-225.
2. Liu P.C., Loper C.R. Scanning Electron Microscope Study of the Graphite Morphology in Cast Iron. Scanning Electron Microscopy 1980, 407-418.
3. Fredriksson H., Hillert M. Physical Metallurgy of Cast Iron. Proceedings of the Third International Symposium. Physical Metallurgy of Cast Iron Proceedings of the Third International Symposium, 29-31 August 1984 1985, xiii+152. North-Holland, New York, NY, USA.
4. Dryden J.R., Purdy G.R. The Effect of Graphite on the Mechanical Properties of Cast Irons. Acta Metallurgica 1989, 37:1999-2006.
5. Subramanian S.V., Kay D.A.R., Purdy G.R. Compacted Graphite Morphology Control. Transactions of the American Foundrymen's Society. Proceedings of the 86th Annual Meeting 1982, 589-603. AFS, Chicago, IL, USA.
6. Shen-Chih L., Yin-Bean C. Fracture Toughness and Crack Growth Rate of Ferritic and Pearlitic Compacted Graphite Cast Irons at 25°C and 150°C. Metallurgical Transactions A (Physical Metallurgy and Materials Science) 1991, 22A:2645-2653.
7. Roviglione A.N., Hermida J.D. From Flake to Nodular: A New Theory of Morphological Modification in Gray Cast Iron. Metallurgical And Materials Transactions B 2004, 35B:313-330.
8. Dawson S., Hollinger I., Robbins M., Daeth J., Reuter U., Schults The Effect of Metallurgical Variables on the Machinability of Compacted Graphite Iron 2001, SAE Technical Paper Series.
9. Gueva G., Sinatora A., Guesser W.L., Tschiptschin A.P. Wear resistance of Cast Irons used in Brake Disc Rotors. International Conference of Wear Materials 2003, 255:1256-1260.
10. Abele E., Sahm A., Schulz H. Wear Mechanism When Machining Compacted Graphite Iron. CIRP Annals - Manufacturing Technology 2002, 51:53-56.
11. Gastel M., Konetschny C., Reuter U., Fasel C., Schulz H., Riedel R., et al. Investigation of the Wear Mechanism of Cubic Boron Nitride Tools Used for the Machining of Compacted Graphite Iron and Grey Cast Iron. International Journal of Refractory Metals & Hard Materials 2000, 18:287-296.
12. Sahm A., Abele E., Schulz H. Machining of Compacted Graphite Iron (CGI). Materialwissenschaft Und Werkstofftechnik 2002, 33s:501-506.
13. Souza J.V.C., Nono M.C.A., Silva O.M.M., Ribeiro M.V. Comparative Study on Turning CI and CGI Using Silicon Nitride Cutting Tools. Advanced Powder Technology Vi 2008, 572-577. L. Salgado, F.A. Filho (Eds.).
14. Pretorius N., Toomey T. Evaluation of Different Cutting Tool Materials for the Interrupted Machining of Compacted Graphite Cast Iron. Industrial Diamond Review 2007, 1:41-48.
15. Stefanescu D.M., Loper C.R. Recent Progress in the Compacted/Vermicular Graphite Cast Iron Field 1981, GieBerei-Praxis, Germany, pp. 73-96.
16. Mocellin F., Melleras E., Guesser W.L., Boehs L. Study of the Machinability of Compacted Graphite Iron for Drilling Process. Journal of the Brazilian Society of Mechanical Science & Engineering 2004, XXVI(1):22-27.
17. Destefani, J., Old Tool Design Takes Off. Manufacturing Engineering. One SME Drive: Dearborn, Michigan 48128 Society of Manufacturing Engineers, 2002.
18. Varghese K.P., Balaji A.K. Effects of Tool Material, Tool Topography and Minimal Quantity Lubrication (MQL) on Machining Performance of Compacted Graphite Iron (CGI). International Journal of Cast Metals Research 2007, 20:347-358.
19. Skvarenina S., Shin Y.C. LASER-assisted Machining of Compacted Graphite Iron. International Journal of Machine Tools and Manufacture 2006, 46:7-17.
20. Klamecki B.E. Incipient Chip Formation in Metal Cutting [Ph.D. Thesis], Ph.D. 1973, University of Illinois at Urbana Champaign, Urbana Champaign.
21. Mohammed W.M. The Effect of Compacted Graphite Iron Microstructure on Fracture and Machining, Ph.D. Thesis 2011, McMaster University, Hamilton.
22. Johnson G.R., Cook W.H. A Constitutive Model and Data for Metals Subjected to Large, High Strain Rates and High Temperatures. Proceedings of the Seventh International Symposium on Ballistics 1983, 541-547.
23. Simoneau A. The Effect of Workpiece Microstructure on the Mechanics of Microscale Cutting of 1045 Steel, Ph.D. Thesis 2007, McMaster University, Hamilton.
24. Movahhedy M., Gadala M.S., Altintas Y. Simulation of the Orthogonal Metal Cutting Process using an Arbitrary Lagrangian-Eulerian Finite-Element Method. Journal of Materials Processing Technology 2000, 103:267-275.
25. Jaspers S.P.F.C., Dautzenberg J.H. Material Behaviour in Conditions Similar to Metal Cutting: Flow Stress in the Primary Shear Zone. Journal of Materials Processing Technology 2002, 122:322-330.
26. Sartkulvanich P., Koppka F., Altan T. Determination of Flow Stress for Metal Cutting Simulation-A Progress Report. Journal of materials processing 2004, 146(1):61-71.
27. Shaw M.C. Energy Conversion in Cutting and Grinding. Annals of CIRP 1996, 45/1:101-104.
28. Mohammed W.M., Ng E.-G., Elbestawi M.A. On Stress Propagation and Fracture in Compacted Graphite Iron. International Journal of Advanced Manufacturing Technology 2011, 56:233-244.
29. Simoneau A., Ng E., Elbestawi M.A. Modeling the Effects of Microstructure in Metal Cutting. International Journal of Machine Tools & Manufacture 2007, 47:368-375.
30. Simoneaue A., Ng E., Elbestawi M.A. Chip Formation During Microscale Cutting of a Medium Carbon Steel. International journal of machine tools & manufacture 2006, 46:467-481.
31. Hirth J.P., Lothe J. Theory of Dislocations 1982, John Wiley & Sons, New York, NY, USA. 2nd ed.
32. Speich G.R., Schwoeble A.J., Kapadia B.M. Elastic Moduli of Gray and Nodular Cast Iron. Journal of Applied Mechanics 1980, 47:821-826.
33. Era E., Kishitake K., Nagai K., Zhang Z. Elastic Modulus and Continuous Yielding Behavior of Ferritic Spheroidal Graphite Cast Iron. Material Science and Technology 1992, 8:257-261.
34. Komvopoulos K., Erpenbeck S.A. Finite-element Modeling of Orthogonal Metal Cutting. Journal of Engineering for Industry-Transactions of the ASME 1991, 113:253-267.
35. Shih A.J. Finite-element Simulation of Orthogonal Metal Cutting. Journal of Engineering for Industry-Transactions of the ASME 1995, 117:84-93.
36. Marusich T.D., Ortiz M. Modeling and Simulation of High-speed Machining. International Journal for Numerical Methods in Engineering 1995, 38:3675-3694.
37. Lin Z.C., Lo S.P. A Study of Deformation of the Machined Workpiece and Tool Under Different low Cutting Velocities with an Elastic Cutting Tool. International Journal of Mechanical Sciences 1998, 40:663-681.
38. Ng E.G., El-Wardany T.I., Dumitrescu M., Elbestawi M.A. Physics-based Simulation of High speed Machining. Machining Science and Technology 2002, 6:301-329.
39. Zhang B., Bagchi A. Finite-element Simulation of Chip Formation and Comparison with Machining Experiment. Journal of Engineering for Industry-Transactions of the ASME 1994, 116:289-297.
40. Carroll J.T., Strenkowski J.S. Finite Element Models of Orthogonal Cutting with Application to Single Point Diamond Turning. International Journal of Mechanical Sciences 1988, 30:899-920.
41. Yang X.P., Liu C.R. A New Stress-based Model of Friction Behavior in Machining and its Significant Impact on Residual Stresses Computed by Finite Element Method. International Journal of Mechanical Sciences 2002, 44:703-723.
42. Johnson G.R., Cook W.H. Fracture Characteristics of Three Metals Subjected to Various Strains, Strain Rates, Temperatures and Pressures. Engineering Fracture Mechanics 1985, 21:31-48.
43. Johnson G.R. Material Characterization for Computations Involving Severe Dynamic Loading. Proc Army Symp on Solid Mechanics 1980, 62-67.
44. Vaziri M.R., Salimi M., Mashayekhi M. A New Calibration Method for Ductile Fracture Models as Chip Separation Criteria in Machining. Simulation Modelling Practice and Theory 2010, 18:1286-1296.
45. Wu H.Y., Lee W.B., Cheung C.F., To S., Chen Y.P. Computer Simulation of Single-point Diamond Turning using Finite Element Method. Journal of Materials Processing Technology 2005, 167:549-554.
46. Childs T., Maekawa K., Obikawa T., Yamane Y. Metal Machining-Theory and Applications 2000, Copublished in North, Central and South America by John Wiley & Sons Inc., New York, NY.
47. Tvergaard V., Hutchinson J.W. The Relation Between Crack Growth Resistance and Fracture Process Parameters in Elastic-Plastic Solids. Journal of Mechanics Physics Solids 1992, 40:1377-1397.
48. Tvergaard V., Hutchinson J.W. The Influence of Plasticity on Mixed-Mode Interface Toughness. Journal of the Mechanics and Physics of Solids 1993, 41:1119-1135.
49. Tvergaard V., Hutchinson J.W. Toughness of an interface along a thin ductile layer joining elastic solids. Philosophical Magazine A-Physics of Condensed Matter Structure Defects and Mechanical Properties 1994, 70:641-656.
50. Kolhe R., Tang S., Hui C.Y., Zehnder A.T. Cohesive Properties of Nickel-Alumina Interfaces Determined via Simulation of Ductile Bridging Experiments. International Journal of Solids and Structures 1999, 36:5573-5595.
51. Chowdhury S.R., Narasimhan R. A Finite Element Analysis of Stationary Crack tip Fields in a Pressure Sensitive Constrained Ductile Layer. International Journal of Solids and Structures 2000, 37:3079-3100.
52. Camacho G.T., Ortiz M. Computational Modelling of Impact Damage in Brittle Materials. International Journal of Solids and Structures 1996, 33:2899-2938.
53. Needleman A. A Continuum Model for Void Nucleation by Inclusion Debonding. Journal of Applied Mechanics-Transactions of the ASME 1987, 54:525-531.
54. ABAQUS 1998, Hibbitt, Karlsson, and Sorensen, Inc., Providence, Rhode Island.
55. Shaw M.C. Metal Cutting Principles 2005, Oxford University Press Inc., New York.
56. Ueda T., Hosokawa A., Oda K., Yamada K. Temperature on Flank Face of Cutting Tool in High Speed Milling. CIRP Annals - Manufacturing Technology 2001, 50/1:37-40.
57. Tian Y., Shin Y.C. Multiscale Finite Element Modeling of Silicon Nitride Ceramics Undergoing Laser-Assisted Machining. Journal of Manufacturing Science and Engineering 2007, 129/2:287-295.