The effect of oxygen and stress state on the yield behavior of commercially pure titanium

Materials Science and Engineering: A

Volumn 551, Issue , 2012, Pages 13-18

  Brandes, M C ^a   Baughman, M ^a,b   Mills, M J ^a   Williams, J C ^a  

^a The Ohio State University   (United States)

^b NONE

Author keywords

Deformation; Oxygen effects; Titanium alloys; Yield strength asymmetry

Indexed keywords

DEFORMATION; TEMPERATURE; TITANIUM ALLOYS;

COMMERCIALLY PURE TITANIUM; EFFECT OF OXYGEN; EFFECT OF STRESS; LOWS-TEMPERATURES; OXYGEN EFFECT; STRENGTH ASYMMETRY; STRESS STATE; TITANIUM (ALLOYS); YIELD BEHAVIORS; YIELD STRENGTH ASYMMETRY;

YIELD STRESS;

EID: 84862148925     PISSN: 09215093     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.msea.2012.04.058     Document Type: Article

References (99)

1. H. Kim, The effect of slip character on low cycle fatigue behavior of Ti-Al alloys, Carnegie Mellon University, Ph.D. Dissertation, Pittsburgh, Pennsylvania, 1982, p. 221 leaves.
2. M.C. Brandes, Ph.D. Dissertation, The Ohio State University, Columbus, Ohio, 2008.
3. Neeraj T., Savage M.F., Tatalovich J., Kovarik L., Hayes R.W., Mills M.J. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 2005, 85:279-295.
4. Yoo M.H., Lee J.K. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 1991, 63:987-1000.
5. Partridge P. Metall. Rev. 1967, 12:169.
6. Yoo M.H. Metall. Trans. A: Phys. Metall. Mater. Sci. 1981, 12:409-418.
7. Paton N.E., Backofen W.A. Trans. Metall. Soc. AIME 1969, 245:1369.
8. Paton N.E., Backofen W.A. Metall. Trans. 1970, 1:2839.
9. Rosi F., Dube A., Alexander B. J. Met. 1953, 257.
10. Rosi F., Perkins F., Seigle L. J. Met. 1956, 8:115.
11. Akhtar A. Metall. Trans. A 1975, 6:1105-1113.
12. Kurmaeva L.D., Akshentsev Y.N., Elkina O.A., Sazonova V.A. Phys. Met. Metall. 2004, 98:389-392.
13. Bozzolo N., Chan L.S., Rollett A.D. J. Appl. Crystallogr. 2010, 43:596-602.
14. Anderson E., Jillson D., Dunbar S. J. Met. 1953, 1191.
15. Anderson E., Jillson D., Dunbar S. J. Met. 1954, 697.
16. Addessio L.B., Cerreta E.K., Gray G.T. Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. 2005, 36A:2893-2903.
17. Brown D.W., Bourke M.A.M., Clausen B., Holden T.M., Tome C.N., Varma R. Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. 2003, 34A:1439-1449.
18. Fundenberger J.J., Philippe M.J., Wagner F., Esling C. Acta Mater. 1997, 45:4041-4055.
19. Ball E.A., Prangnell P.B. Scr. Metall. Mater. 1994, 31:111.
20. Agnew S.R., Viswanathan S., Payzant E.A., Han Q., Liu K.C., Kenik E.A. Magnesium Alloys and Their Applications 2001, 687.
21. R. Liu, D.L. Yin, J.T. Wang, J. Tao, X.A. Zhao, Influence of deformation processing on the tensile/compressive asymmetry in wrought Mg-3Al-Zn alloy, in: S.R.N.N.R.N.E.A.S.W.H. Agnew (Eds.), Magnesium Technology, 2010, pp. 439-444.
22. Sukedai E., Yokoyama T. Int. J. Mater. Res. 2010, 101:736-740.
23. Yin D.L., Wang J.T., Liu J.Q., Zhao X. J. Alloys Compd. 2009, 478:789-795.
24. Luo A.A., Powell B.R. Tensile and compressive creep of magnesium-aluminum-calcium based alloys. Magnesium Technology 2001 2001, 137-144. J.N. Hryn (Ed.).
25. Agnew S.R., Liu K.C., Kenik E.A., Viswanathan S. Tensile and compressive creep behavior of die cast magnesium alloy AM60B. Magnesium Technology 2000 2000, 285-290. H.I. Kaplan, J.N. Hryn, B. Clow (Eds.).
26. Lachenmar R., Schultz H. Scr. Metall. 1972, 6:731.
27. Webb G.L., Gibala R., Mitchell T.E. Metall. Trans. 1974, 5:1581-1584.
28. Bowman K.J., Gibala R. Acta Metall. Mater. 1992, 40:193-200.
29. Chang L.N., Taylor G., Christian J.W. Acta Metall. 1983, 31:37-42.
30. Chang L.N., Taylor G., Christian J.W. Scr. Metall. 1982, 16:95-98.
31. Hirth J.P., Cohen M. Metall. Trans. 1970, 1:3.
32. Ravi K.V., Gibala R. 2nd International Conference on the Strength of Metals and Alloys, vol. 1 1973, 83.
33. Bowman K.J., Gibala R. Scr. Metall. 1986, 20:1451-1454.
34. Ratka J.O., Gibala R. J. Met. 1981, 33:A43.
35. Tomalin D.S., McMahon C.J. Acta Metall. 1973, 21:1189-1193.
36. Woodward C., Rao S.I. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 2001, 81:1305-1316.
37. Sigle W. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 1999, 79:1009-1020.
38. Vitek V. Proc. R. Soc. Lond. A: Math. Phys. Eng. Sci. 1976, 352:109-124.
39. Heinisch H.L., Sines G. Philos. Mag. 1976, 34:945-960.
40. Seidman D.N., Burke J.J. Acta Metall. 1974, 22:1301-1314.
41. Rabier J., Grilhe J. J. Phys. Chem. Solids 1973, 34:1031-1038.
42. Diener G., Heinrich R., Schellen W. Phys. Status Solidi B: Basic Res. 1971, 44:403.
43. Vitek V., Perrin R.C., Bowen D.K. Philos. Mag. 1970, 21:1049.
44. Duesbery M.S., Vitek V. Acta Mater. 1998, 46:1481-1492.
45. K.N. May, M.S. Thesis, The Ohio State University, Columbus, Ohio, 2010.
46. K.N. May, M.C. Brandes, L.-M. Yang, M.J. Mills, J.C. Williams, Titanium 2011: science and technology, 12th Proceedings of the World Conference on Titanium, Beijing, China, 2011, in press.
47. Ando S., Gotoh T., Tonda H. Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. 2002, 33A:823-829.
48. Liang M.H., Bacon D.J. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 1986, 53:181-204.
49. Liang M.H., Bacon D.J. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 1986, 53:205-220.
50. Numakura H., Minonishi Y., Koiwa M. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 1990, 62:525-543.
51. Ando S., Tsushida M., Tonda H. J. Jpn. Inst. Met. 2005, 69:855-858.
52. Ando S., Gotoh T., Tonda H. Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. 2002, 33:823-829.
53. Morris J.R., Ho K.M., Chen K.Y., Rengarajan G., Yoo M.H. Modell. Simul. Mater. Sci. Eng. 2000, 8:25-35.
54. Ando S., Goto T., Takashima K., Tonda H. J. Jpn. Inst. Met. 1999, 63:573-576.
55. Ando S., Takashima K., Tonda H. Mater. Trans. JIM 1996, 37:319-322.
56. Girshick A., Pettifor D.G., Vitek V. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 1998, 77:999-1012.
57. Domain C., Legris A. IUTAM Symposium on Mesoscopic Dynamics of Fracture Process and Materials Strength, vol. 41 2004, 1-420. 411.
58. J. Li, Unpublished Research in Brandes, M.C., Ph.D. Dissertation, The Ohio State University, 2008, University of Pennsylvania, 2007-08.
59. Naka S., Lasalmonie A., Costa P., Kubin L. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 1988, 57:717.
60. Naka S., Lasalmonie A. J. Mater. Sci. 1983, 18:2613-2617.
61. Sob M., Kratochvil J. Chekhoslovatskii Fizicheskii Zhurnal 1975, 25B:872.
62. Jones R.L., Conrad H. Trans. Metall. Soc. AIME 1969, 245:779.
63. Williams J.C., Tung P.P., Sommer A.W. Metall. Trans. 1972, 3:2979-2984.
64. Dewobroto N., Bozzolo N., Grosdidier T., Wagner F. Titanium'03: science and technology. 10th Proceedings of the World Conference on Titanium, vol. 2 2004, 1212.
65. H. Garmestani, Air Force Research Laboratory Report #AFRL-SR-AR-TR-07-0366 (2005).
66. Boger R.K., Wagoner R.H., Barlat F., Lee M.G., Chung K. Int. J. Plast. 2005, 21:2319-2343.
67. Holloman J. Trans. Metall. Soc. AIME 1947, 171:355.
68. Holden F., Ogden H., Jaffee R. J. Met. 1953, 238.
69. Garde A., Reed-Hill R. Metall. Trans. 1971, 2:2885.
70. Arunacha V., Monteiro S.N., Reedhill R.E., Pattanai S. Metall. Trans. 1972, 3:1009.
71. Monteiro S.N., Santhanam A.T., Reed-Hill R.E. J. Met. 1968, 20:A104.
72. Conrad H. Prog. Mater. Sci. 1981, 26:123.
73. Williams J., Baggerly R., Paton N. Metall. Mater. Trans. A: Phys. Metall. Mater. Sci. 2002, 33A:837.
74. T. Sakai, Plastic Deformation of Ti and Ti-Al Alloy Single Crystals, Northwestern University, Ph.D. Dissertation, Evanston, Illinois, 1976.
75. Naka S., Lasalmonie A. Mater. Sci. Eng. 1982, 56:19.
76. Biget M.P., Saada G. Philos. Mag. A: Phys. Condens. Matter Struct. Defects Mech. Prop. 1989, 59:747-757.
77. F. Beck, NASA Technical Report CR-134796 (1975).
78. J.W. Fu, The Effects of Hydrogen on Slip and Twinning in Pure Titanium Single Crystals, vol Ph.D. Dissertation, The Ohio State University, Ph.D. Dissertation, Columbus, Ohio, 1975.
79. Churchman A. Proc. R. Soc. A 1954, 226:216.
80. Cass T. Titanium'68: science and technology. 1st Proceedings of the World Conference on Titanium, vol. 1 1968, 459.
81. T. Cass, W. Spencer, Research on Deformation and Possible Strengthening Mechanisms for Solid Solution Phases of Titanium, vol Dayton, Ohio, Air Force Materials Laboratory, Martin Marietta Corporation, Orlando, Florida, 1969.
82. Cass T.R. Titanium'70: science and technology. Proceedings of the International Conference on Titanium, 1970 1971, 459-477.
83. Rosi F. J. Met. 1954, 58.
84. Moskalenko V., Puptsova V. Fiz. Met. Metalloved. 1972, 34:1264.
85. M. Amateau, E. Steigerwald, The Relationship between Plastic Deformation and Fracture in Alpha Titanium, Air Force Materials Laboratory, Contract no. AF 33(615)-1682, Materials Research and Development Department, TRW Equipment Group, Cleveland, Ohio, 1966.
86. Brehm C., Lehr P. Mem. Sci. Rev. Metall. 1971, 68:277.
87. Hirth J.P., Lothe J. Theory Dislocations 1982, Wiley, New York.
88. Finlay W.L., Snyder J.A. Trans. AIME 1950, 188:277.
89. Lacombe P. Titanium'84: science and technology. 5th Proceedings of the World Conference on Titanium, vol. 4 1985, 2705-2721.
90. Frank W., Sestak B. Scr. Metall. 1970, 4:451-453.
91. Suzuki H. J. Phys. Soc. (Jpn.) 1962, 17:322.
92. Welsch G., Bunk W. Metall. Trans. 1982, 13A:889-899.
93. Liu Z., Welsch G. Metall. Trans. 1988, 19A:527-542.
94. Liu Z., Welsch G. Titanium'88: science and technology. 6th Proceedings of the World Conference on Titaniums, vol. 1 1989, 99.
95. Murayama Y., Mikami M., Ishiyama S. Nihon Kinzoku Gakkaishi 1993, 57:628.
96. Trinkle D.R., Woodward C. Science 2005, 310:1665-1667.
97. Romaner L., Ambrosch-Draxl C., Pippan R. Phys. Rev. Lett. 2010, 104:195503.
98. Medvedeva N.I., Gornostyrev Y.N., Freeman A.J. Phys. Rev. B 2005, 72:134107.
99. Feng Y.Q., Wang C.Y. J. Alloys Compd. 2000, 312:219-227.