High strength and high ductility of ultrafine-grained, interstitial-free steel produced by ecae and annealing

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 43, Issue 6, 2012, Pages 1884-1894

  Purcek, Gencaga ^a   Saray, Onur ^a   Karaman, Ibrahim ^b   Maier, Hans J ^c  

^a KARADENIZ TECHNICAL UNIVERSITY   (Turkey)

^b Department of Electrical and Computer Engineering   (United States)

^c UNIVERSITY OF PADERBORN   (Germany)

Author keywords

[No Author keywords available]

Indexed keywords

ANNEALING TIME; COARSE-GRAINED; EQUAL CHANNEL ANGULAR EXTRUSION; HIGH DISLOCATION DENSITY; HIGH STRENGTH; IF STEEL; INTERSTITIAL FREE STEEL; PLASTIC INSTABILITIES; RECRYSTALLIZATION TEMPERATURES; SEVERE PLASTIC DEFORMATIONS; STRESS-STRAIN RESPONSE; SUBMICRON; TENSILE DUCTILITY; TENSILE ELONGATION; TIME INTERVAL; TOTAL ELONGATIONS; ULTRA FINE GRAINED MICROSTRUCTURE; ULTRAFINE-GRAINED; UNIFORM ELONGATION;

ANNEALING; DUCTILITY; MICROSTRUCTURE; RECRYSTALLIZATION (METALLURGY); STEEL METALLURGY;

TENSILE STRENGTH;

EID: 84861912803     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-011-1063-7     Document Type: Article

References (41)

1. S.-H. Lee, H. Utsunomiya, and T. Sakai: Metall. Mater. Trans. A, 2004, vol. 45A, pp. 2177-81.
2. T. Niendorf, D. Canadinc, H.J. Maier, and I. Karaman: Int. J. Fatigue, 2008, vol. 30, pp. 426-36.
3. O. Saray, G. Purcek, and I. Karaman: Rev. Adv. Mater. Sci., 2010, vol. 25, pp. 42-51.
4. G.J. Raab, R. Valiev, T.C. Lowe, and Y.T. Zhu: Mater. Sci. Eng. A, 2004, vol. 382, pp. 30-34.
5. K.-T. Park and D.H. Shin: Mater. Sci. Eng. A, 2002, vol. 334, pp. 76-86.
6. T. Niendorf, D. Canadinc, H.J. Maier, I. Karaman, and S.G. Sutter: Int. J. Mater. Res., 2006, vol. 97, pp. 1328-36.
7. T. Niendorf, D. Canadinc, H.J. Maier, and I. Karaman: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1946-55.
8. T. Niendorf, H.J. Maier, D. Canadinc, and I. Karaman: Mater. Sci. Eng. A, 2009, vol. 503, pp. 160-62.
9. H.S. Kim, W.S. Ryu, M. Janacek, S.C. Baik, and Y. Estrin: Adv. Eng. Mater., 2005, vol. 7, pp. 43-46.
10. B. Yan, S. Dower, L. Jin, J. Shen, Y. Huang, and S. Jiao: Mater. Sci. Forum, 2008, vols. 584-586, pp. 631-36.
11. Y.H. Jin and M.Y. Huh: J. Mater. Sci., 2004, vol. 39, pp. 5311-14.
12. N. Tsuji, S. Okuno, Y. Koizumi, and Y. Minamino: Metall. Trans., 2004, vol. 45 (7), pp. 2272-81.
13. T.S. Wang, Z. Li, B. Zhang, X.J. Zhang, J.M. Deng, and F.C. Zhang: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2798-801.
14. Y.-H. Zhao, X.-Z. Liao, S. Cheng, E. Ma, and Y.T. Zhu: Adv. Mater., 2006, vol. 18, pp. 2280-83.
15. N. Tsuji, N. Kamikawa, R. Ueji, N. Takata, H. Koyama, and D. Terada: ISIJ Int., 2008, vol. 48 (8), pp. 1114-21.
16. D.H. Shin: Metall. Mater. Int., 2001, vol. 7 (6), pp. 573-77.
17. Y.M. Wang and E. Ma: Acta Mater., 2004, vol. 52, pp. 1699-709.
18. C.Y. Yu, P.L. Sun, P.W. Kao, and C.P. Chang: Scripta Mater., 2005, vol. 52, pp. 359-63.
19. Y.-H. Zhao, T. Topping, J.F. Bingert, J.J. Thornton, A.M. Dangelewicz, Y. Li, W. Liu, Y. Zhu, Y. Zhou, and E.J. Lavernia: Adv. Mater., 2008, vol. 20, pp. 3028-33.
20. R.E. Barber, T. Dudo, P.B. Yasskin, and K.T. Hartwig: Scripta Mater., 2004, vol. 51 (5), pp. 373-7.
21. M. Furukawa, Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Mater. Sci. Eng. A, 1998, vol. 257 (2), pp. 328-32.
22. T. Niendorf, J. Dadda, D. Canadinc, H.J. Maier, and I. Karaman: Mater. Sci. Eng. A, 2009, vol. 517, pp. 225-34.
23. B.L. Bramfitt and A.O. Benscoter: Metallographers Guide: Practices and Procedures for Irons and Steels, ASM International, Materials Park, OH, 2002, pp. 226-27.
24. V.V. Stolyarov, Y.T. Zhu, I.V. Alexandrov, T.C. Lowe, and R.Z. Valiev: Mater. Sci. Eng. A, 2001, vol. 299, pp. 59-67.
25. A.V. Sergueeva, V.V. Stolyarov, R.Z. Valiev, and A.K. Mukherjee: Scripta Mater., 2001, vol. 45, pp. 747-52.
26. K.Y. Zhu, A. Vassel, F. Brisset, K. Lu, and J. Lu: Acta Mater., 2004, vol. 52, pp. 4101-10.
27. A. Belyakov, Y. Kimura, and K. Tsuzaki: Mater. Sci. Eng. A, 2005, vol. 403, pp. 249-59.
28. A.A. Gazder, W. Cao, C.H.J. Davies, and E.V. Pereloma: Mater. Sci. Eng. A, 2008, vol. 497, pp. 341-52.
29. G. Purcek, O. Saray, O. Kul, I. Karaman, G.G. Yapici, M. Haouaoui, and H.J. Maier: Mater. Sci. Eng. A, 2009, vol. 517 (1-2), pp. 97-104.
30. Y.M. Wang, M.W. Chen, F.H. Zhou, and E. Ma: Nature, 2002, vol. 419, pp. 912-15.
31. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893-99.
32. I. Samajdar, B. Veerlinden, P. Van Houtte, and D. Vanderschueren: Scripta Mater., 1997, vol. 37 (6), pp. 869-74.
33. J. Gil Sevillano and J. Aldazabal: Scripta Mater., 2004, vol. 51, pp. 795-800.
34. X. Molodova, G. Gottstein, M. Winning, and R.J. Hellmig: Mater. Sci. Eng. A, 2007, vols. 460-461, pp. 204-13.
35. Y. Zhao, T. Topping, Y. Li, and E.J. Lavernia: Adv. Eng. Mater., 2011, vol. 13 (9), pp. 865-71.
36. J. Laws: Mater. Sci. Lett., 1983, vol. 2, pp. 527-31.
37. S.P. Joshi, K.T. Ramesh, B.Q. Han, and E.J. Lavernia: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2397-2404.
38. S.S Hazra, E.V. Pereloma, and A.A. Gazder: Acta Mater., 2011, vol. 59 (10), pp. 4015-29.
39. R. Rana, S.B. Singh, W. Bleck, and O.N. Mohanty: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1483-92.
40. J.R. Davis: Tensile Testing, 2nd ed., ASM International, Materials Park, OH, 2004, pp. 24-25.
41. Y.H. Zhao, Y.Z. Guo, Q. Wei, A.M. Dangelewicz, C. Xu, Y.T. Zhu, T.G. Langdon, Y.Z. Zhou, and E.J. Lavernia: Scripta Mater., 2008, vol. 59, pp. 627-30.