In situ neutron-diffraction studies on the creep behavior of a ferritic superalloy

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 43, Issue 5, 2012, Pages 1497-1508

  Huang, Shenyan ^a   Brown, Donald W ^b   Clausen, Bjoørn ^b   Teng, Zhenke ^a   Gao, Yanfei ^c   Liaw, Peter K ^a  

^a University of Tennessee   (United States)

^b LOS ALAMOS NATIONAL LABORATORY   (United States)

^c OAK RIDGE NATIONAL LABORATORY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

AXIAL DIRECTION; AXIAL LOADING; CREEP BEHAVIORS; CREEP DEFORMATIONS; CREEP MECHANISM; DEFORMED MATRIX; DISLOCATION GLIDE; HIGH STRESS; IN-SITU; IN-SITU NEUTRON DIFFRACTION; INTERGRANULAR STRESS; LATTICE MISFITS; LATTICE STRAIN; LOAD TRANSFER; LOW STRESS; MATRIX PHASE; PHASE STRAINS; POWER LAW CREEP; POWER-LAW BREAKDOWN; PRIMARY CREEP; STRENGTHENING EFFECT; STRESS LEVELS; TEXTURE EVOLUTIONS; THERMALLY ACTIVATED;

FERRITE; FERRITIC STEEL; NEUTRON DIFFRACTION; PRECIPITATES; SUPERALLOYS; TEXTURES;

CREEP;

EID: 84861862334     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-011-0979-2     Document Type: Conference Paper

References (38)

1. C. Stallybrass and G. Sauthoff: Mater. Sci. Eng. A, 2004, vol. 387, pp. 985-90.
2. C. Stallybrass, A. Schneider, and G. Sauthoff: Intermetallics, 2005, vol. 13, pp. 1263-68.
3. Z.K. Teng, C.T. Liu, G. Ghosh, P.K. Liaw, and M.E. Fine: Intermetallics, 2010, vol. 18, pp. 1437-43.
4. Z.K. Teng, M.K. Miller, G. Ghosh, C.T. Liu, S. Huang, K.F. Russell, M.E. Fine, and P. K. Liaw: Scripta Mater., 2010, vol. 63, pp. 61-64.
5. S.M. Zhu, S.C. Tjong, and J.K.L. Lai: Acta Mater., 1998, vol. 46, pp. 2969-76.
6. H. Bhadeshia: ISIJ Int., 2001, vol. 41, pp. 626-40.
7. M.B. Ruggles, S. Cheng, and E. Krempl: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process, 1994, vol. 186, pp. 15-21.
8. H. Magnusson and R. Sandstrom: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process, 2009, vol. 527, pp. 118-25.
9. D.B. Miracle: Acta Metall. Mater., 1993, vol. 41, pp. 649-84.
10. M.R. Daymond, M. Preuss, and B. Clausen: Acta Mater., 2007, vol. 55, pp. 3089-3102.
11. S. Ma, V. Seetharaman, and B.S. Majumdar: Acta Mater., 2008, vol. 56, pp. 4102-13.
12. S. Ma, D. Brown, M.A.M. Bourke, M.R. Daymond, and B.S. Majurndar: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process, 2005, vol. 399, pp. 141-53.
13. M. Fukuhara and A. Sanpei: ISIJ Int., 1993, vol. 33, pp. 508-12.
14. A.C. Larson and R.B. Von Dreele: GSAS-General Structure Analysis System, p. 143.
15. M.R. Daymond, M.A.M. Bourke, R.B. VonDreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82, pp. 1554-62.
16. H.J. Stone, T.M. Holden, and R.C. Reed: Acta Mater., 1999, vol. 47, pp. 4435-48.
17. S.C. Tjong and Z.Y. Ma: Mater. Lett., 2002, vol. 56, pp. 59-64.
18. G. Ghosh and G.B. Olson: Acta Mater., 2002, vol. 50, pp. 2655-75.
19. H.M.A. Winand, A.F. Whitehouse, and P.J. Withers: Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process, 2000, vol. 284, pp. 103-13.
20. W. Gale and T. Totemeier: Smithells Metals Reference Book, 8th ed., Elsevier, Atlanta, GA, 2004.
21. H. Calderon and M.E. Fine: Mater. Sci. Eng., 1984, vol. 63, pp. 197-208.
22. H.A. Calderon, M.E. Fine, and J.R. Weertman: Metall. Trans. A, 1988, vol. 19A, pp. 1135-46.
23. R. Taillard, A. Pineau, and B.J. Thomas: Mater. Sci. Eng., 1982, vol. 54, pp. 209-19.
24. H. Choo, D. Seo, J. Beddoes, M.A.M. Bourke, and D.W. Brown: Appl. Phys. Lett., 2004, vol. 85, pp. 4654-56.
25. M.R. Daymond and H.G. Priesmeyer: Acta Mater., 2002, vol. 50, pp. 1613-26.
26. E.C. Oliver, M.R. Daymond, and P. J. Withers: Acta Mater., 2004, vol. 52, pp. 1937-51.
27. Y. Tomota, P. Lukas, S. Harjo, J.H. Park, N. Tsuchida, and D. Neov: Acta Mater., 2003, vol. 51, pp. 819-30.
28. M.T. Hutchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, 1st ed., CRC Press, Boca Raton, FL, 2005, p. 161.
29. S.J. Lewis and C.E. Truman: J. Phys. D-Appl. Phys., 2010, vol. 43, p. 265501.
30. O. Engler and V. Randle: Introduction to Texture Analysis: Macrotexture, Microtexture, and Orientation Mapping, 2nd ed., CRC Press, Boca Raton, FL, p. 153.
31. W.F. Hosford: The Mechanics of Crystals and Textured Polycrystals, 20th ed., Oxford University Press, New York, NY, pp. 36-42.
32. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps: the Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, UK, 1982.
33. A.S. Argon: Physical Metallurgy, Eds. Robert W. Cahn and Peter Haasen, 4th ed., Elsevier, Atlanta, GA, p. 1999.
34. F. Groisbock: J. Mater. Sci., 1992, vol. 27, pp. 4373-80.
35. F. Groisbock and R. Ebner: Z. Metallk., 1991, vol. 82, pp. 435-41.
36. J.W. Martin: Micromechanisms in Particle-Hardened Alloys, Cambridge University Press, Cambridge, UK, p. 43.
37. M.E. Kassner: Fundamentals of Creep in Metals and Alloys, 1st ed., Elsevier, Atlanta, GA, pp. 151-69.
38. A.J. Allen, M.A.M. Bourke, S. Dawes, M.T. Hutchings, and P.J. Withers: Acta Metall. Mater., 1992, vol. 40, pp. 2361-73.