Cyclic-loading induced lattice-strain asymmetry in loading and transverse directions

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 43, Issue 5, 2012, Pages 1454-1461

  Huang, E Wen ^a   Barabash, Rozaliya I ^b,c   Clausen, Bjørn ^d   Liaw, Peter K ^e  

^a NATIONAL CENTRAL UNIVERSITY   (Taiwan)

^b OAK RIDGE NATIONAL LABORATORY   (United States)

^c University of Tennessee   (United States)

^d LOS ALAMOS NATIONAL LABORATORY   (United States)

^e UNIVERSITY OF TENNESSEE   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

BULK TEMPERATURES; CYCLIC HARDENING; CYCLIC LOADINGS; ELEVATED TEMPERATURE; FATIGUE CYCLES; IN-SITU; NICKEL- BASED SUPERALLOYS; ROOM TEMPERATURE; STRUCTURAL TRANSFORMATION; TEMPERATURE EVOLUTION; THERMOELASTIC RESPONSE; TRANSVERSE DIRECTIONS;

CONDENSED MATTER PHYSICS; MATERIALS SCIENCE; METALLURGICAL ENGINEERING;

LOADING;

EID: 84861848322     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-011-0972-9     Document Type: Conference Paper

References (45)

1. D. Kuhlmann-Wilsdorf: Philos. Mag. A, 1999, vol. 79 (4), pp. 955-1008.
2. A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1221-34.
3. Y.F. Li and C. Laird: Mater. Sci. Eng. A, 1994, vol. 186 (1-2), pp. 87-103.
4. S. Suresh, Y. Sugimura, and E.K. Tschegg: Scripta Metall. Mater., 1992, vol. 27 (9), pp. 1189-94.
5. K. Solanki, S.R. Daniewicz, and J.C. Newman: Eng. Fract. Mech., 2004, vol. 71 (2), pp. 149-71.
6. P. Neumann: Scripta Metall. Mater., 1992, vol. 26 (10), pp. 1535-40.
7. H. Mughrabi: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1257-79.
8. A. Guinier and R. Julien: The Solid State from Superconductors to Superalloys, Oxford University Press, Oxford, United Kingdom, 1989.
9. N. Thompson: in Fracture, Averbach, ed., Wiley, New York, 1959, p. 354.
10. M. Balbi, M. Avalos, A. El Bartali, and I. Alvarez-Armas: Int. J. Fatigue, 2009, vol. 31 (11-12), pp. 2006-13.
11. M. Kabatova, E. Dudrova, and A.S. Wronski: Fatigue Fract. Eng. Mater. Struct., 2009, vol. 32 (3), pp. 214-22.
12. A.L. Pilchak, R.E.A. Williams, and J.C. Williams: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 106-24.
13. M.C. Marinelli, A. El Bartali, J.W. Signorelli, P. Evrard, V. Aubin, I. Alvarez-Armas, and S. Degallaix-Moreuil: Mater. Sci. Eng. A, 2009, vol. 509 (1-2), pp. 81-88.
14. U. Krupp, O. Duber, H.J. Christ, B. Kunkler, P. Koster, and C.P. Fritzen: Mater. Sci. Eng. A, 2007, vol. 462 (1-2), pp. 174-77.
15. E.W. Huang, R.I. Barabash, B. Clausen, Y.L. Liu, J.J. Kai, G.E. Ice, K.P. Woods, and P.K. Liaw: Int. J. Plast., 2010, vol. 26 (8), pp. 1124-37.
16. J.F. Nye: Physical Properties of Crystals: Their Representation by Tensors and Matrices, Oxford University Press, Oxford, United Kingdom, 1985.
17. R.N. Thurston: IEEE Trans. Ultrason. Ferroelectr. Freq. Control, 1994, vol. 41 (4), pp. 425-34.
18. E.W. Huang, R. Barabash, N. Jia, Y.D. Wang, G. Ice, B. Clausen, J. Horton, and P.K. Liaw: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 3079-88.
19. A. Arya, G.K. Dey, V.K. Vasudevan, and S. Banerjee: Acta Mater., 2002, vol. 50 (13), pp. 3301-15.
20. E.W. Huang, Y. Liu, Y. Ren, L. Porcar, J.-J. Kai, P.K. Liaw, G.S. Smith, and W.-R. Chen: Philos. Mag. Lett., 2011, vol. 91 (7), p. 483.
21. E.W. Huang, P.K. Liaw, L. Porcar, Y. Liu, Y.L. Liu, J.J. Kai, and W.R. Chen: Appl. Phys. Lett., 2008, vol. 93 (16).
22. R.I. Barabash, E.W. Huang, J.J. Wall, J.H. Wilkerson, Y. Ren, W.J. Liu, S.C. Vogel, G.E. Ice, L.M. Pike, and P.K. Liaw: Mater. Sci. Eng. A, 2010, vol. 528 (1), pp. 3-10.
23. Y.D. Wang, H.B. Tian, A.D. Stoica, X.L. Wang, P.K. Liaw, and J.W. Richardson: Nat. Mater., 2003, vol. 2 (2), pp. 101-06.
24. M.R. Daymond and P.J. Withers: Scripta Mater., 1996, vol. 35 (6), pp. 717-20.
25. M.R. Daymond, M.A.M. Bourke, R.B. VonDreele, B. Clausen, and T. Lorentzen: J. Appl. Phys., 1997, vol. 82 (4), pp. 1554-62.
26. A. Kumar, T. Jayakumar, B. Raj, and K.K. Ray: Acta Mater., 2003, vol. 51 (8), pp. 2417-26.
27. T. Lorentzen, M.R. Daymond, B. Clausen, and C.N. Tome: Acta Mater., 2002, vol. 50 (6), pp. 1627-38.
28. E.W. Huang, R.I. Barabash, G.E. Ice, W.J. Liu, Y.L. Liu, J.J. Kai, and P.K. Liaw: JOM, 2009, vol. 61 (12), pp. 53-58.
29. M.D. Sangid, H.J. Maier, and H. Sehitoglu: Acta Mater., 2011, vol. 59 (1), pp. 328-41.
30. T. Ungar, I. Groma, and M. Wilkens: J. Appl. Crystallogr., 1989, vol. 22 (1), pp. 26-34.
31. R. Barabash, G.E. Ice, B.C. Larson, G.M. Pharr, K.S. Chung, and W. Yang: Appl. Phys. Lett., 2001, vol. 79 (6), pp. 749-51.
32. D. Balzar and H. Ledbetter: J. Appl. Crystallogr., 1993, vol. 26, pp. 97-103.
33. R.I. Barabash, G.E. Ice, and F.J. Walker: J. Appl. Phys., 2003, vol. 93 (3), pp. 1457-64.
34. R.I. Barabash, W. Donner, and H. Dosch: Appl. Phys. Lett., 2001, vol. 78 (4), pp. 443-45.
35. R.I. Barabash, S.A. Demin, M.A. Krivoglaz, and K.V. Chuistov: J. Appl. Crystallogr., 1990, vol. 23, pp. 458-61.
36. A.K. Wong, S.A. Dunn, and J.G. Sparrow: Nature, 1988, vol. 332 (6165), pp. 613-15.
37. S. Quinn, J.M. Dulieu-Barton, and J.M. Langlands: Strain, 2004, vol. 40 (3), pp. 127-33.
38. M.T. Hutchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, Taylor & Francis Group, Boca Raton, FL, 2005.
39. S.L. Wong and P.R. Dawson: Acta Mater., 2011, DOI: 10.1016/j.actamat. 2011.07.042.
40. P. Stanley and W.K. Chan: J. Strain Anal. Eng. Design, 1985, vol. 20 (3), pp. 129-37.
41. E.W. Huang, R.I. Barabash, Y.D. Wang, B. Clausen, L. Li, P.K. Liaw, G.E. Ice, Y. Ren, H. Choo, L.M. Pike, and D.L. Klarstrom: Int. J. Plast., 2008, vol. 24 (8), pp. 1440-56.
42. H.S. Turkmen, P.R. Dawson, and M.P. Miller: Int. J. Plast., 2002, vol. 18 (8), pp. 941-69.
43. U.F. Kocks, C.N. Tomé , and H.-R. Wenk: Texture and Anisotropy: Preferred Orientations in Polycrystals and Their Effect on Materials Properties, Cambridge University Press, Cambridge, United Kingdom, 1998.
44. T. Hoc and S. Forest: Int. J. Plast., 2001, vol. 17 (1), pp. 65-85.
45. P. Evrard, I. Alvarez-Armas, V. Aubin, and S. Degallaix: Mech. Mater., 2010, vol. 42 (4), pp. 395-404.