Computational fluid dynamic modeling of zinc slag fuming process in top-submerged lance smelting furnace

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 43, Issue 1, 2012, Pages 39-55

  Huda, Nazmul ^a   Naser, Jamal ^a   Brooks, Geoffrey ^a   Reuter, Markus A ^b   Matusewicz, Robert W ^c  

^a SWINBURNE UNIVERSITY OF TECHNOLOGY   (Australia)

^b Technology and Product Management   (Australia)

^c Outotec Limited   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

ANALOGOUS SYSTEMS; AUSTRIA; CFD ANALYSIS; COMBUSTION PHENOMENA; EULERIAN; EXPERIMENTAL DATA; EXPERIMENTAL STUDIES; IMPERIAL SMELTING FURNACE; INTERFACIAL INTERACTION; LANCE TIP; LUMP COAL; MASS FRACTION; METAL VAPOR; MODEL RESULTS; MOLTEN SLAG; PLUME SHAPES; PULVERIZED COALS; REDUCTANTS; SIMULATION TIME; SLAG BATH; SLAG FUMING; SLAG-GAS INTERFACE; SMELTING FURNACES; THREEDIMENSIONAL (3-D); TREATMENT PROCESS; VALIDATION PROCESS; ZNO;

COAL COMBUSTION; COMPUTATIONAL FLUID DYNAMICS; FORTRAN (PROGRAMMING LANGUAGE); METALLURGICAL FURNACES; MULTIPHASE FLOW; PHASE INTERFACES; REACTION KINETICS; SLAGS; VAPORS; ZINC; ZINC OXIDE;

THREE DIMENSIONAL;

EID: 84861813030     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-011-9558-6     Document Type: Article

References (41)

1. R.G. Reddy, V.L. Prabhu, and D. Mantha: High Temp. Mater. Proc., 2003, vol. 21 (6), pp. 377-86.
2. C.Y. Choi and Y.H. Lee: REWAS - Global Symposium on Recycling, Waste Treatment and Clean Technology, San Sebastian, Spain, 1999.
3. G.G. Richards, J.K. Brimacombe, and G.W. Toop: Metall. Trans. B, 1985, vol. 16B, pp. 513-27.
4. G.G. Richards and J.K. Brimacombe: Metall. Trans. B, 1985, vol. 16B, pp. 529-40.
5. G.G. Richards and J.K. Brimacombe: Metall. Trans. B, 1985, vol. 16B, pp. 541-49.
6. R. Suzuki, S. Goto, and K. Azuma: J. Facul. Eng., Univ. Tokyo (B), 1970, vol. 30 (3), pp. 247-87.
7. S.L. Cockcroft, G.G. Richards, and J.K. Brimacombe: Can. Metall. Q., 1988, vol. 27 (1), pp. 27-40.
8. S.L. Cockcroft, G.G. Richards, and J.K. Brimacombe: Metall. Trans. B, 1989, vol. 20B, pp. 227-35.
9. G.G. Richards: EPD Congress, TMS, Warrendale, PA, 1994, pp. 525-37.
10. K.E. Scholey, G.G. Richards, and I.V. Samarasekera: Metall. Trans. B, 1991, vol. 22B, pp. 163-75.
11. M. Waladan and M. Nilmani: Can. Metall. Q., 1995, vol. 34 (4), pp. 311-18.
12. E. Jak and P. Hayes: Can. Metall. Q., 2002, vol. 41 (2), pp. 163-74.
13. R.M. Grant: Aus./Jap. Ext. Metall. Symp, Australasian Institute of Mining and Metallurgy, Sydney, Australia, 1980, pp. 75-93.
14. E. Jak and P. Hayes: Zinc Proc. Conf, Brisbane, Australia, 2008.
15. I. Dal and W.J. Rankin: Int. Symp.-World Zinc '93, Hobart, Australia, 1993, pp. 417-21.
16. M. Miyake: Zinc-Lead Smelting at Hachinohe Smelter, Hachinohe, Japan, 1995, pp. 39-50.
17. D.J. Sofra and A. Heinz: EMC, Hannover, Germany, 2003, pp. 491-506.
18. S. Hughes, R.W. Matusewicz, M.A. Reuter, and D. Sherrington: EMC, Dusseldorf, Germany, 2007, pp. 1193-1208.
19. M. Waladan: Lead and Zinc 1995, Sendai, Japan, 1995.
20. J. Hoang, M.A. Reuter, R. Matusewicz, and S. Hughes: Zinc Proc, Conf. Brisbane, Australia, 2008.
21. N. Huda, J. Naser, G. Brooks, M.A. Reuter, and R. Matusewicz: Metall. Mater. Trans. B, 2010, vol. 41B, pp. 35-50.
22. G.G. Richards: The Howard Worner Int. Symp. on Inj. Pyro. TMS, Melbourne, Australia, 1996, pp. 97-105.
23. G. Haralampiev and N. Popov: Can. Metall. Q., 1999, vol. 38 (1), pp. 1-9.
24. K. Chang, G.A. Irons, and Q. Jiao: Can. Metall. Q., 2005, vol.44 (2), pp. 281-8.
25. H.H. Kellogg: Trans. TMS-AIME, 1967, vol. 239, pp. 1439-49.
26. C.W. Bale, E. Belisle, P. Chartrand, S.A. Decterov, G. Eriksson, K. Hack, I.-H. Jung, Y.-B. Kang, J. Melancon, A.D. Pelton, C. Robelin, and S. Petersen: Com. Coup. of Phase Diag. Therm., 2008, vol. 33, pp. 295-311.
27. B.E. Launder and D.B. Spalding: Com. Meth. App. Mech. Eng., 1974, vol. 3 (2), pp. 269-89.
28. S.V. Patankar and D.B. Spalding: Int. J. Heat. Mass. Trans., 1972, vol. 15, pp. 1787-806.
29. AVL FIRE CFD Solver Manual, vol. 2008, AVL, Graz, Austria, 2008.
30. Y. Sato and K. Sekoguchi: Int. J. Multiphase Flow, 1975, vol. 2 (1), pp. 79-95.
31. AVL FIRE CFD Multiphase Manual v 2008, AVL, Graz, Austria, 2008.
32. J. Chahed, V. Roig, and L. Masbernat: Int. J. Multiphase Flow, 2003, vol. 29, pp. 23-49.
33. B.F. Magnussen and B.H. Hjertager: Proc. 16th Symp. (Int.) Combustion, The Combustion Institute, Pittsburgh, PA, 1976, pp. 719-29.
34. D.B. Spalding: Symp. (Int.) Combustion, 1971, vol. 1 (13), pp. 649-57.
35. D.C. Wilcox: Turbulence Modelling for CFD, DCW Industries, Inc., La Canada Flintridge, CA, 2006.
36. W.E. Ranz and W.R. Marshall: Chem. Eng. Progr., 1952, vol. 48 (3), pp. 173-80.
37. F.D. Skinner and L.D. Smoot: Pulverized Coal Combustion and Gasification, L.D. Smoot and D.T. Pratt, eds., Plenum Press, New York, NY, 1979, pp. 149-67.
38. M. Waladan, G.R. Firkin, J. Bultitude-Paull, B.W. Lightfoot, and J.M. Floyd: Lead-Zinc Conf. '90, February 18-21, Anaheim, CA, 1990.
39. AVL FIRE CFD Species Transport Manual, vol. 2008, AVL, Graz, Austria, 2008.
40. T.A.A. Quarm: Trans. IMM, 1980, vol. 89, pp. 139-44.
41. T. Lehner and R. Lindgren: CIM Meeting, Vancouver, Canada, 1985. http://md1.csa.com/partners/viewrecord.php?requester=gs&collection= TRD&recid=8803420570MD&q=&uid=789670966&setcookie=yes.