Experimental evaluation of the physical properties required of abrasives for optimizing waterjet cutting of ductile materials

Wear

Volumn 284-285, Issue , 2012, Pages 43-51

  Gent, M ^a   Menendez M ^a   Torno, S ^a   Torano J ^a   Schenk, A ^b  

^a UNIVERSITY OF OVIEDO   (Spain)

^b LEIBNIZ UNIVERSITY HANNOVER   (Germany)

Author keywords

Abrasives; Erosion; Optimization; Physical properties; Waterjet cutting

Indexed keywords

CRYSTALLINE MATERIALS; DUCTILITY; EROSION; HARDNESS; JETS; OPTIMIZATION; PARTICLE SIZE; PHYSICAL PROPERTIES;

ABRASIVE MASS FLOW RATE; ABRASIVE PARTICLE SIZE; ABRASIVE PARTICLES; ABRASIVE PROPERTIES; ABRASIVE WATERJET CUTTING; EXPERIMENTAL EVALUATION; HIGH DENSITY GLASS; WATERJET CUTTING;

ABRASIVES;

EID: 84861656185     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2012.02.012     Document Type: Article

References (35)

1. M. Hashish, Experimental studies of cutting with abrasive waterjets, in: D.A. Summers, F.F. Haston (Eds.), Proc. Second U.S. Water Jet Conf., WJTA, St. Louis, MO 63101-1434, USA, 1983, pp. 402-416.
2. K. Kantha Babu, I.V. Krishnaiah Chetty, A study of the use of single mesh size abrasives in abrasive waterjet machining, Int. J. Manuf. Technol. 29 (2006) 532-540.
3. M. Hashish, A modeling study of metal cutting with abrasive jets, J. Eng. Mater. Technol.-Trans. ASME 106 (1984) 88-100.
4. M. Hashish, W.V. Loscutoff, P. Reich, Cutting with abrasive waterjets, in: D.A. Summers, F.F. Haston (Eds.), Proc. Second U.S. Waterjet Conf., University of Missouri-Rolla, Rolla, MO, USA, 1983, pp. 417-436.
5. Q. Fang, P.S. Sidky, M.G. Hocking, Microripple formation and removal mechanism of ceramic materials by solid-liquid slurry erosion, Wear 223 (1-2) (1998) 93-101.
6. J. Foldyna, P. Martinec, L. Sitek, Testing of industrial types of abrasives for abrasive water jet cutting, in: M. Hood, P.G. Dunn, T.G.M. Meyer (Eds.), Proc. 6th Pacific Rim Int. Conf. Water Jet Technol., Sydney, CMTE Australia, 2000, pp. 143-147.
7. K. Matsumoto, H. Arasawa, S. Yamaguchi, A study of the effect of abrasive material on cutting with abrasive waterjet, in: P.A. Wood (Ed.), Proc. Nineth Int. Symp. Jet Cutting Technol., Sendai, Japan, 1988, pp. 225-269.
8. P. Martinec, J. Foldyna, L. Sitek, K. Barcová, L. Bilková, Olivine as industrial abrasive for high-speed water jet technology, in: P. Lake (Ed.), 16th International Conference on Water Jetting, Aix-en-Provence, France, BHR Group, The Fluid Engineering Centre, Cranfield, Bedfordshire, UK, 2002, pp. 287-297.
9. J.P. Collart, personal communication, TRAXYS, Bertrange, Grand-Duchy of Luxembourg, 2010.
10. A.A. Khan, M.M. Haque, Performance of different abrasive materials during abrasive water jet machining of glass, J. Mater. Process. Technol. 191 (2007) 404-407.
11. KMT, Glass cutting with water jet, http://www.kmt-waterjet.com/glasscutting.aspx (accessed 21.06.2010).
12. M. Gent, M. Menéndez, S. Torno, A. Schenk, Orientative deformation mode cutting results of some alternative abrasives for applications in abrasive waterjet cutting, in: P. Longman (Ed.), Proc. 19th Int. Conf. Water Jetting, Nottingham, UK, BHR Group, The Fluid Engineering Centre, Cranfield, Bedfordshire, UK, 2008, pp. 289-303.
13. S. Wada, Effects of hardness and fracture toughness of target materials and impact particles on erosion of ceramic materials, in: J.E. Ritter (Ed.), Erosion of Ceramic Materials, Trans. Tech. Publ., 1992, pp. 51-74.
14. H. Oweinah, Leistungssteigerung des Hochdruckwasserstrahlschneidens durch Zugabe von Zusatzstoffen, Ph.D. Thesis, TU, Darmstradt, Germany, 1989.
15. A. Akkurt, M.K. Kulekci, U. Seker, F. Ercan, Effect of feed rate on surface roughness in abrasive waterjet cutting applications, J. Mater. Process. Technol. 147 (3) (2004) 389-396.
16. I. Finnie, The mechanism of erosion of ductile metals, in: R.M. Haythornthwaite (Ed.), Proc. 3rd U.S. Natl. Congr. Appl. Mech. (A.S.M.E.), New York, USA, 1958, pp. 527-532.
17. J.G.A. Bitter, A study of erosion phenomena: part I, Wear 6 (1963) 5-21.
18. J.G.A. Bitter, A study of erosion phenomena: part II, Wear 6 (1963) 169-190.
19. A.G. Evans, M.E. Gulden, M. Rosenblatt, Impact damage in brittle materials in the elastic-plastic response regime, Proc. R. Soc. A: Math. Phys. Eng. Sci. 361 (1978) 343.
20. M. Mazurkiewicz, P. Karlic, Material dynamic response during abrasive jet machining {HAJM}, in: M. Hood, D. Dornfeld (Eds.), Proc. Fourth U.S. Water Jet Conf., WJTA, St. Louis, MO 63101-1434, USA, 1987, pp. 245-261.
21. R.R.R. Ellermaa, Erosion prediction of pure metals and steels, Wear 162-164 (1993) 1114-1122.
22. A.W. Momber, R. Kovacevic, H. Kwak, Alternative method for the evaluation of the abrasive water-jet cutting of grey cast iron, J. Mater. Process. Technol. 65 (1997) 65-72.
23. A.A. Abdel-Rahman, A.A. El-Domiaty, Maximum depth of cut for ceramics using abrasive waterjet technique, Wear 218 (1998) 216-222.
24. S. Ferrendier, Influence de l'evolution granulométrique sur l'enlèvement de matière lors de la découpe par jet d'abrasif, Ph.D. Thesis, Ecole Nationale Supérieure d'Arts et Métiers Centre de Paris, France, 2001.
25. A. Lebar, M. Junkar, Simulation of abrasive water jet cutting process: part 1. Unit event approach, Model. Simul. Mater. Sci. Eng. 12 (2004) 1159-1170.
26. H. Orbanic, M. Junkar, Simulation of abrasive water jet cutting process: part 2. Cellular automata approach, Model. Simul. Mater. Sci. Eng. 12 (2004) 1171-1184.
27. M. Hashish, Observations on cutting with 600-MPa waterjets, J. Press. Vessel Technol. 124 (2002) 229-233.
28. Z. Yong, R. Kovacevic, Effects of water-mixture film on impact contact in abrasive waterjet machining, Int. J. Mech. Sci. 39 (6) (1997) 729-739.
29. W.C. Krumbein, Measurement and geological significance of shape and roundness of sedimentary particles, J. Sediment. Petrol. 11 (2) (1941) 64-72.
30. A.A. Griffith, The phenomena of rupture and flow in solids, Philos. Trans. R. Soc. A: Math. Phys. Eng. Sci. 221 (1920) 163-198.
31. A.A. Griffith, The theory of rupture, in: C.B. Biezeno, J.M. Burgers (Eds.), Proc. First Int. Congr. Appl. Mech., 1924, pp. 55-63.
32. F.C. Bond, The third theory of comminution, Trans. AIME 193 (1952) 484-494.
33. F.C. Bond, Crushing and grinding calculations, part I-II, Br. Chem. Eng. 6 (6) (1961) 378-385.
34. S. Yashima, Y. Kanda, S. Sano, Relationships between particle size and fracture energy or impact velocity required to fracture as estimated from single particle crushing, Powder Technol. 51 (1987) 277-282.
35. L.M. Tavares, R.P. King, Single-particle fracture under impact loading, Int. J. Min. Process. 54 (1998) 1-28.