Adhesion and micromechanical deformation processes in PLA/CaSO 4 composites

Carbohydrate Polymers

Volumn 89, Issue 3, 2012, Pages 759-767

  Imre, Balázs ^a,b   Keledi, Gergely ^a,b   Renner, Károly ^a,b   Móczó, János ^a,b   Murariu, Marius ^c   Dubois, Philippe ^c   Pukánszky, Béla ^a,b  

^a BUDAPEST UNIVERSITY OF TECHNOLOGY AND ECONOMICS   (Hungary)

^b CHEMICAL RESEARCH CENTER   (Hungary)

^c UNIVERSITY OF MONS   (Belgium)

Author keywords

Debonding; Interfacial adhesion; PLA CaSO 4 bio composites; Surface modification

Indexed keywords

BIO-COMPOSITES; COATED PARTICLES; COMPOSITION RANGES; FILLER PARTICLES; INSTRUMENTED IMPACT TEST; INTERFACIAL ADHESIONS; LOCAL DEFORMATIONS; LOCAL DISTRIBUTIONS; LOCAL PLASTIC DEFORMATION; MICRO-MECHANICAL DEFORMATIONS; XRD;

COATINGS; DEBONDING; DEFORMATION; FILLED POLYMERS; FILLERS; INTERFACES (MATERIALS); LOADING; MECHANICAL PROPERTIES; STEARIC ACID; SURFACE TREATMENT;

ADHESION;

EID: 84861616081     PISSN: 01448617     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.carbpol.2012.04.005     Document Type: Article

References (51)

1. R. Auras, B. Harte, and S. Selke An overview of polylactides as packaging materials Macromolecular Bioscience 4 2004 835 864
2. Z. Bartczak, A.S. Argon, R.E. Cohen, and M. Weinberg Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles Polymer 40 1999 2347 2365
3. B. Bax, and J. Müssig Impact and tensile properties of PLA/Cordenka and PLA/flax composites Composites Science and Technology 68 2008 1601 1607
4. M.N. Belgacem, and A. Gandini Monomers, polymers and composites from renewable resources 2008 Elsevier Amsterdam
5. G.S. Bhat, P. Gulgunje, and K. Desai Development of structure and properties during thermal calendering of polylactic acid (PLA) fiber webs Express Polymer Letters 2 2008 49 56
6. N.C. Bleach, S.N. Nazhat, K.E. Tanner, M. Kellomäki, and P. Törmälä Effect of filler content on mechanical and dynamic mechanical properties of particulate biphasic calcium phosphate-polylactide composites Biomaterials 23 2002 1579 1585
7. M.P. Comard, R. Calvet, H. Balard, and J.A. Dodds The influence of polymer impregnation ratios on the surface properties of fumed silicas as determined by inverse gas chromatography Colloids and Surfaces A-Physicochemical and Engineering Aspects 232 2004 269 274
8. S. Comte, R. Calvet, J.A. Dodds, and H. Balard Surface properties of low specific surface powders using inverse gas chromatography Powder Technology 157 2005 39 47
9. G.M. Dorris, and D.G. Gray Adsorption of normal-alkanes at zero surface coverage on cellulose paper and wood fibers Journal of Colloid and Interface Science 77 1980 353 362
10. R.S. Drago, G.C. Vogel, and T.E. Needham Four-parameter equation for predicting enthalpies of adduct formation Journal of the American Chemical Society 93 1971 6014 6026
11. I.L. Dubnikova, S.M. Berezina, and A.V. Antonov The effect of morphology of ternary-phase polypropylene/glass bead/ethylene-propylene rubber composites on the toughness and brittle-ductile transition Journal of Applied Polymer Science 85 2002 1911 1928
12. J. Evans Alternative feedstocks. How viable? Plastics Engineering 67 2011 12 17
13. E. Fekete, J. Móczó, and B. Pukánszky Determination of the surface characteristics of particulate fillers by inverse gas chromatography at infinite dilution: A critical approach Journal of Colloid and Interface Science 269 2004 143 152
14. A. Gandini Polymers from renewable resources: A challenge for the future of macromolecular materials Macromolecules 41 2008 9491 9504
15. K. Gorna, M. Hund, M. Vucak, F. Grohn, and G. Wegner Amorphous calcium carbonate in form of spherical nanosized particles and its application as fillers for polymers Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing 477 2008 217 225
16. S.Y. Gu, K. Zhang, J. Ren, and H. Zhan Melt rheology of polylactide/poly(butylene adipate-co-terephthalate) blends Carbohydrate Polymers 74 2008 79 85
17. V. Gutmann The donor-acceptor approach to molecular interactions 1978 New York Plenum Press
18. M. Hirata, and Y. Kimura Thermo mechanical properties of stereoblock poly(lactic acid)s with different PLLA/PDLA block compositions Polymer 49 2008 2656 2661
19. C.H. Ho, C.H. Wang, C.I. Lin, and Y.D. Lee Synthesis and characterization of TPO-PLA copolymer and its behavior as compatibilizer for PLA/TPO blends Polymer 49 2008 3902 3910
20. C.-F. Kuan, H.-C. Kuan, C.-C.M. Ma, and C.-H. Chen Mechanical and electrical properties of multi-wall carbon nanotube/poly(lactic acid) composites Journal of Physics and Chemistry of Solids 69 2008 1395 1398
21. B. Li, S.C. Chen, Z.C. Qiu, Q.K.K. Yang, S.P. Tang, and W.J. Yu Synthesis of poly(lactic acid-b-p-dioxanone) block copolymers from ring opening polymerization of p-dioxanone by poly(l-lactic acid) macroinitiators Polymer Bulletin 61 2008 139 146
22. M.S. Lindblad, Y. Liu, A.C. Albertsson, E. Ranucci, and S. Karlsson Polymers from renewable resources Degradable Aliphatic Polyesters 157 2002 139 161
23. O. Mert, E. Doganci, H.Y. Erbil, and A.S. Dernir Surface characterization of poly(l-lactic acid)-methoxy poly(ethylene glycol) diblock copolymers by static and dynamic contact angle measurements, FTIR, and ATR-FTIR Langmuir 24 2008 749 757
24. 4 on the mechanical and thermal properties of styrene-butadiene rubber Journal of Applied Polymer Science 104 2007 2018 2026
25. A.K. Mohanty, M. Misra, and L.T. Drzal Sustainable bio-composites from renewable resources: Opportunities and challenges in the green materials world Journal of Polymers and the Environment 10 2002 19 26
26. 4 composites: Homogeneity and interactions Express Polymer Letters 3 2009 49 61
27. P. Mukhopadhyay, and H.P. Schreiber Aspects of acid-base interactions and use of inverse gas-chromatography Colloids and Surfaces A-Physicochemical and Engineering Aspects 100 1995 47 71
28. M. Murariu, A.D. Ferreira, P. Degee, M. Alexandre, and P. Dubois Polylactide compositions. Part 1: Effect of filler content and size on mechanical properties of PLA/calcium sulfate composites Polymer 48 2007 2613 2618
29. 4 composites toughened with low molecular weight and polymeric ester-like plasticizers and related performances European Polymer Journal 44 2008 3842 3852
30. K. Nagahama, Y. Nishimura, Y. Ohya, and T. Ouchi Impacts of stereoregularity and stereocomplex formation on physicochemical, protein adsorption and cell adhesion behaviors of star-shaped 8-arms poly(ethylene glycol)-poly(lactide) block copolymer films Polymer 48 2007 2649 2658
31. L.E. Nielsen Mechanical properties of polymers and composites 1974 New York Marcel Dekker
32. U. Panzer, and H.P. Schreiber On the evaluation of surface interactions by inverse gas-chromatography Macromolecules 25 1992 3633 3637
33. L.M. Parrinello Fiber geometry-effects on physical-properties of chopped fiber composites Tappi Journal 74 1991 85 88
34. M.A. Paul, M. Alexandre, P. Degee, C. Henrist, A. Rulmont, and P. Dubois New nanocomposite materials based on plasticized poly(l-lactide) and organo-modified montmorillonites: Thermal and morphological study Polymer 44 2003 443 450
35. M. Pluta, J.K. Jeszka, and G. Boiteux Polylactide/montmorillonite nanocomposites: Structure, dielectric, viscoelastic and thermal properties European Polymer Journal 43 2007 2819 2835
36. M. Pluta, M. Murariu, A.D. Ferreira, M. Alexandre, A. Galeski, and P. Dubois Polylactide compositions. II. Correlation between morphology and main properties of PLA/calcium sulfate composites Journal of Polymer Science Part B-Polymer Physics 45 2007 2770 2780
37. 3 composites New Polymeric Materials 3 1992 205 217
38. B. Pukánszky, and G. Vörös Stress distribution around inclusions, interaction, and mechanical properties of particulate-filled composites Polymer Composites 17 1996 384 392
39. P.S. Razi, and A. Raman Studies on impact fracture properties of wood-polymer composites Journal of Composite Materials 34 2000 980 997
40. K. Renner, J. Móczó, G. Vörös, and B. Pukánszky Quantitative determination of interfacial adhesion in composites with strong bonding European Polymer Journal 46 2010 2000 2004
41. K. Renner, M.S. Yang, J. Móczó, H.J. Choi, and B. Pukánszky Analysis of the debonding process in polypropylene model composites European Polymer Journal 41 2005 2520 2529
42. G. Rohman, F. Laupretre, S. Boileau, P. Guerin, and D. Grande Poly(d,l-lactide)/poly(methyl methacrylate) interpenetrating polymer networks: Synthesis, characterization, and use as precursors to porous polymeric materials Polymer 48 2007 7017 7028
43. R. Sharpe, and G. Cork J.E. Kogel, N.C. Trivedi, J.M. Barker, S.T. Krukowski, Gypsum and anhydrite. In Industrial minerals & rocks 2006 Society for Mining, Metallurgy, and Exploration, Inc. Littletown 519 540
44. M.J. Sobkowicz, J.L. Feaver, and J.R. Dorgan Clean and green bioplastic composites: Comparison of calcium sulfate and carbon nanospheres in polylactide composites Clean-Soil Air Water 36 2008 706 713
45. A. Södergard, and M. Stolt Properties of lactic acid based polymers and their correlation with composition Progress in Polymer Science 27 2002 1123 1163
46. K. Wang, J. Wu, L. Ye, and H. Zeng Mechanical properties and toughening mechanisms of polypropylene/barium sulfate composites Composites Part A: Applied Science and Manufacturing 34 2003 1199 1205
47. N. Wang, X.X. Zhang, X.F. Ma, and J.M. Fang Influence of carbon black on the properties of plasticized poly(lactic acid) composites Polymer Degradation and Stability 93 2008 1044 1052
48. C.K. Williams, and M.A. Hillmyer Polymers from renewable resources: A perspective for a special issue of polymer reviews Polymer Reviews 48 2008 1 10
49. G. Wypych Handbook of fillers 1999 ChemTec Publishing Toronto
50. S.M. Zebarjad, M. Tahani, and S.A. Sajjadi Influence of filler particles on deformation and fracture mechanism of isotactic polypropylene Journal of Materials Processing Technology 155 2004 1459 1464
51. W.C.J. Zuiderduin, C. Westzaan, J. Huétink, and R.J. Gaymans Toughening of polypropylene with calcium carbonate particles Polymer 44 2003 261 275