Studies on properties of softwood (Ficus hispida)/ PMMA nanocomposites reinforced with polymerizable surfactant-modified nanoclay

Polymer Bulletin

Volumn 68, Issue 7, 2012, Pages 1989-2008

  Hazarika, A ^a   Devi, R R ^a   Maji, T K ^a  

^a TEZPUR UNIVERSITY   (India)

Author keywords

Characterization; MMA prepolymer; Organo MMT; Preparation; Soft wood

Indexed keywords

AMMONIUM CHLORIDE; CETYLTRIMETHYLAMMONIUM BROMIDE; CHEMICALLY MODIFIED; COMPARATIVE STUDIES; CROSS LINKING AGENTS; FTIR; GLYCIDYL METHACRYLATE; METHYL METHACRYLATE MONOMER; MOLAR RATIO; NANO CLAYS; ORGANO-MMT; POLYMERIZABLE SURFACTANT; PREPARATION; PREPOLYMERS; TRIMETHYL; WATER UPTAKE; WOOD POLYMERS; XRD;

ACRYLIC MONOMERS; AMMONIUM COMPOUNDS; BROMINE COMPOUNDS; CHARACTERIZATION; CHEMICAL RESISTANCE; CHLORINE COMPOUNDS; CLAY MINERALS; CROSSLINKING; ESTERS; IMPREGNATION; MECHANICAL PROPERTIES; MONOMERS; NANOCOMPOSITES; POLYMERS; SOFTWOODS;

SURFACE ACTIVE AGENTS;

CHEMICAL RESISTANCE; CROSS LINKING; ESTERS; HEAT TREATMENT; IMPREGNATION; METHYL METHACRYLATE; POLYMERS; SOFTWOODS; SURFACTANTS;

EID: 84861458654     PISSN: 01700839     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00289-012-0706-1     Document Type: Article

References (26)

1. Khan MA, Idriss Ali KM (1992) Wood-plastic composite using water soluble monomer. Radiat Phys Chem 40:433-436
2. Gindl W, Zargar-Yaghubi F, Wimmer R (2003) Impregnation of softwood cell walls with melamine- formaldehyde resin. Bioresour Technol 87:325-330 (Pubitemid 36043962)
3. Deka M, Saikia CN (2000) Chemical modification of wood with thermosetting resin: effect on dimensional stability and strength property. Bioresour Technol 73:179-181 (Pubitemid 30110641)
4. Devi RR, Ali I, Maji TK (2003) Chemical modification of rubber wood with styrene in combination with a crosslinker: effect on dimensional stability and strength property. Bioresour Technol 88:185-188 (Pubitemid 36279633)
5. Rozman HD, Kumar RN, Abdul Khalil HPS, Abusamah A, Abu R (1997) Fibre activation with glycidyl methacrylate and subsequent copolymerization with diallyl phthalate. Eur Polym J 33:1213-1218 (Pubitemid 127368405)
6. Rozman HD, Kumar RN, Abusamah A, Saad MJ (1998) Rubberwood-polymer composites based on glycidyl methacrylate and diallyl phthalate. J Appl Polym Sci 67:1221-1226 (Pubitemid 128562657)
7. Ashori A (2008) Wood-plastic composites as promising green-composites for automotive industries! Bioresour Technol 99:4661-4667
8. Xue FL, Zhao GJ (2008) Optimum preparation technology for Chinese fir wood/Ca-montmorillonite (Ca-MMT) composite board. For Stud China 10:199-204
9. Lu WH, Zhao GJ, Xue ZH (2006) Preparation and characterization of wood/montmorillonite nanocomposites. For Stud China 8:35-40
10. Cai X, Riedl B, Zhang SY, Wan H (2008) The impact of the nature of nanofillers on the performance of wood polymer nanocomposites. Composites A 39:727-737
11. Ashori A, Nourbakhsh A (2009) Effects of nanoclay as a reinforcement filler on the physical and mechanical properties of wood based composite. Compos Mater 43:1869-1875
12. Kiani H, Ashori A, Mozaffari SA (2011) Water resistance and thermal stability of hybrid lignocellulosic filler-PVC composites. Polym Bull 66:797-802
13. Alexandre M, Dubois P, Sun T, Garces JM, Jérôme R (2002) Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties. Polymer 43:2123-2132 (Pubitemid 34193747)
14. Lu WH, Zhao GJ (2004) Design of wood/montmorillonite (MMT) intercalation nanocomposite. For Stud China 6:54-62
15. Samakande A, Hartmann PC, Cloete V, Sanderson R (2007) Use of acrylic based surfmers for the preparation of exfoliated polystyrene-clay nanocomposites. Polymer 48:1490-1499
16. Zhong Y, Zhu Z, Wang S (2005) Synthesis and rheological properties of polystyrene/layered silicate nanocomposite. Polymer 46:3006-3013 (Pubitemid 40417863)
17. Vazquez A, Lopez M, Kortaberria G, Martin L, Mondragon I (2008) Modification of montmorillonite with cationic surfactants. Thermal and chemical analysis including CEC determination. Appl Clay Sci 41:24-36
18. Devi RR, Maji TK, Banerjee AN (2004) Studies on dimensional stability and thermal properties of rubber wood chemically modified with styrene and glycidyl methacrylate. J Appl Polym Sci 93:1938-1945 (Pubitemid 38896321)
19. Tomar AK, Suman M, Kumar S (2011) Structural characterization of PMMA blended with chemically synthesized PAni. Adv Appl Sci Res 2:327-333
20. Devi RR, Maji TK (2011) Preparation and characterization of wood/styrene-acrylonitrile co-polymer/MMT nanocomposite. J Appl Polym Sci 122:2099-2109
21. Yap MGS, Que YT, Chia LHL (1991) FTIR characterization of tropical wood-polymer composites. J Appl Polym Sci 43:2083-2090
22. Deka BK, Maji TK (2011) Study on the properties of nanocomposite based on high density polyethylene, polypropylene, polyvinyl chloride and wood. Composites A 42:686-693
23. Devi RR, Maji TK (2012) Chemical modification of simul wood with styrene-acrylonitrile copolymer and organically modified nanoclay. Wood Sci Technol 46:299-315
24. Qin H, Zhang S, Zhao C, Feng M, Yang M, Shu Z (2004) Thermal stability and flammability of polypropylene/montmorillonite composites. Polym Degrad Stab 85:807-813
25. Fung KL, Li RKY, Tjong SC (2002) Interface modification on the properties of sisal fiber-reinforced polypropylene composites. J Appl Polym Sci 85:169-176 (Pubitemid 34554463)
26. Zhu J, Start P, Mauritz KA, Wilkie CA (2002) Thermal stability and flame retardancy of poly(methyl methacrylate)-clay nanocomposites. Polym Degrad Stab 77:253-258 (Pubitemid 34772649)