Low-temperature superplasticity in nanocrystalline tetragonal zirconia polycrystal (TZP)

Journal of the American Ceramic Society

Volumn 95, Issue 5, 2012, Pages 1701-1708

  Yoshida, Hidehiro ^a   Matsui, Koji ^b   Ikuhara, Yuichi ^c  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

^b TOSOH CORPORATION   (Japan)

^c UNIVERSITY OF TOKYO   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

AMORPHOUS LAYER; AVERAGE GRAIN SIZE; ELONGATION TO FAILURE; ENERGY DISPERSIVE X-RAY; GRAIN SIZE; INITIAL STRAINS; LOW TEMPERATURE SUPERPLASTICITY; LOW TEMPERATURES; LOWER LIMITS; NANOCRYSTALLINES; PRESSURELESS SINTERING; SCANNING TRANSMISSION ELECTRON MICROSCOPY; SECOND PHASE PARTICLES; SINGLE-PHASE MATERIALS; TEMPERATURE RANGE; TETRAGONAL ZIRCONIA POLYCRYSTAL;

AMORPHOUS MATERIALS; GERMANIUM; GERMANIUM OXIDES; GRAIN BOUNDARIES; POLYCRYSTALS; TRANSMISSION ELECTRON MICROSCOPY; ZIRCONIA; ZIRCONIUM ALLOYS;

SINTERING;

EID: 84861194808     PISSN: 00027820     EISSN: 15512916     Source Type: Journal    
DOI: 10.1111/j.1551-2916.2012.05150.x     Document Type: Article

References (55)

1. 2 Polycrystals," Adv. Ceram. Mater., 1, 259-263 (1986).
2. A. H. Chokshi, " Superplasticity in Fine Grained Ceramics and Ceramic Composites: Current Understanding and Future Prospects," Mater. Sci. Eng. A, 166, 119-133 (1993).
3. T. Sakuma, " Aspects on Superplasticity in Fine-Grained Ceramics," Mater. Sci. Forum, 243-245, 327-336 (1997).
4. M. Jiménez-melendo, A. Domínguez-Rodríguez, and, A. Bravo-Leõn, " Superplastic Flow of Fine-Grained Yttria-Stabilized Zirconia Polycrystals: Constitutive Equation and Deformation Mechanisms," J. Am. Ceram. Soc., 81, 2761-2776 (1998).
5. T. G. Nieh, and, J. Wadsworth, " Superplastic Behavior of a Fine-Grained, Yttria-Stabilized, Tetragonal Zirconia Polycrystal (Y-TZP)," Acta Metall. Mater., 38, 1121-1133 (1990).
6. Y. Maehara, and, T. G. Langdon, " Superplasticity in Ceramics," J. Mater. Sci., 25, 2275-2286 (1990).
7. Y. Yoshizawa, and, T. Sakuma, " Improvement of Tensile Ductility in High-Purity Alumina due to Magnesia Addition," Acta Metal. Mater., 40, 2943-2950 (1992).
8. K. Hiraga, B.-N. Kim, K. Morita, T. S. Suzuki, and, Y. Sakka, " Microstructural Design for High-Strain-Rate Superplastic Oxide Ceramics," J. Ceram. Soc. Japan, 113, 191-197 (2005).
9. K. Hiraga, B.-N. Kim, K. Morita, H. Yoshida, T. S. Suzuki, and, Y. Sakka, " High-Strain-Rate Superplasticity in Oxide Ceramics ", Sci. Tech. Adv. Mater., 8, 578-587 (2007).
10. D. M. Hulbert, D. Jiang, J. D. Kuntz, Y. Kodera, and, A. K. Mukherjee, " A Low-Temperature High-Strain-Rate Formable Nanocrystalline Superplastic Ceramic," Scripta Mater., 56, 1103-1106 (2007).
11. 2-Spinel Composite," Key Eng. Mater., 345-346, 573-576 (2007).
12. 2 Ceramics," Mater. Sci. Forum, 551-552, 491-496 (2007).
13. A. Domínguez-Rodríguez, D. Gomez-Garcia, M. Castillo-Rodriguez, E. Zapata-Solvas, and, R. Chaim, " Superplasticity in Nanocrystalline Ceramics: Pure Grain Boundary Phenomena or not? " Int. J. Mater. Res., 101, 1215-1221 (2010).
14. J. Mimurada, M. Nakano, K. Sasaki, Y. Ikuhara, and, T. Sakuma, " Effect of Cation Doping on the Superplastic Flow in Yttria-Stabilized Tetragonal Zirconia Polycrystals," J. Am. Ceram. Soc., 84, 1817-1821 (2001).
15. 2," Acta Mater., 57, 3029-3038 (2009).
16. R. L. Fullman, " Measurement of Particle Sizes in Opaque Bodies," Trans. AIME, 197, 447-452 (1957).
17. K. Matsui, H. Yoshida, and, Y. Ikuhara, " Phase-Transformation and Grain-Growth Kinetics in Yttria-Stabilized Tetragonal Zirconia Polycrystal Doped With a Small Amount of Alumina," J. Eur. Ceram. Soc., 30, 1679-1690 (2010).
18. T. G. Nieh, C. M. McNally, and, J. Wadsworth, " Superplastic Properties of a Fine-Grained Yttria-Stabilized Tetragonal Polycrystal of Zirconia," Scripta Metall., 22, 1297-1300 (1988).
19. Y. Ma, and, T. G. Langdon, " A Critical Assessment of Flow and Cavity Formation in a Superplastic Yttria-Stabilized Zirconia," Acta Metall. Mater., 42, 2753-2761 (1994).
20. T. Guo-quan, and, L. Zhao-rong, " Tensile Deformation Behavior of a Superplastic 3mol% Yttria Stabilized Zirconia Polycrystal (3Y-TZP)," Mater. Sci. Forum, 243-245, 393-398 (1997).
21. S. Tekeli, and, T. J. Davies, " Effect of Prestraining on Cavity Morphology in a Superplastic 3 mol% Yttria-Stabilized Tetragonal Zirconia (3Y-TZP)," Scripta Mater., 39, 119-124 (1998).
22. 2-Doped TZP," Mater. Trans. JIM, 39, 1108-1114 (1998).
23. Z. C. Wang, N. Ridley, and, T. J. Davies, " Cavitation Behaviour in Fine Grain 3Y-TZP During Tensile and Compressive Superplastic Flow," J. Mater. Sci., 34, 2695-2702 (1999).
24. Y. Sakka, T. Matsumoto, T. S. Suzuki, K. Morita, B.-N. Kim, K. Hiraga, and, Y. Moriyoshi, " Low-Temperature and High-Strain Rate Superplastic Zirconia," Adv. Eng. Mater., 5, 130-133 (2003).
25. Y. Sakka, T. Ishii, T. S. Suzuki, K. Morita, and, K. Hiraga, " Fabrication of High-Strain Rate Superplastic Yttria-Doped Zirconia Polycrystals by Adding Manganese and Aluminum Oxides," J. Eur. Ceram. Soc., 24, 449-453 (2004).
26. 3/YTZ Ceramic Composite," Scripta Metall., 23, 457-460 (1989).
27. A. H. Chokshi, T. G. Nieh, and, J. Wadsworth, " Role of Concurrent Cavitation in the Fracture of a Superplastic Zirconia-Alumina Composite," J. Am. Ceram. Soc., 74, 869-873 (1991).
28. K. Hiraga, K. Nakano, T. S. Suzuki, and, Y. Sakka, " Cavitation Damage During High Temperature Tensile Deformation in Fine-Grained Alumina Doped With Magnesia or Zirconia," Scripta Mater., 39, 1273-1279 (1998).
29. M. Oka, N. Tabuchi, and, T. Takashi, " High Strain Rate Superplasticity in Ceramics," Mater. Sci. Forum, 304-306, 451-458 (1999).
30. B.-N. Kim, K. Hiraga, K. Morita, and, Y. Sakka, " Superplasticity in Alumina Enhanced by Co-Dispersion of 10% Zirconia and 10% Spinel Particles," Acta Mater., 49, 887-895 (2001).
31. 3-Spinel Composite Ceramic," Scripta Mater., 47, 775-779 (2002).
32. 4 Spinel," J. Am. Ceram. Soc., 85, 1900-1902 (2002).
33. K. Hiraga, K. Nakano, T. S. Suzuki, and, Y. Sakka, " Processing-Dependent Microstructural Factors Affecting Cavitation Damage and Tensile Ductility in a Superplastic Alumina Dispersed With Zirconia," J. Am. Ceram. Soc., 85, 2763-2770 (2002).
34. 4 Spinel Composite," Phil. Mag., 83, 533-541 (2003).
35. K. Matsui, H. Yoshida, and, Y. Ikuhara, " Grain-Boundary Structure and Microstructure Development Mechanism in 2-8 mol% Yttria-Stabilized Zirconia Polycrystals," Acta Mater., 56, 1315-1325 (2008).
36. 2," J. Eur. Ceram. Soc., 29, 411-418 (2009).
37. W. R. Cannon, and, T. G. Langdon, " Creep of Ceramics Part1. Mechanical Characteristics," J. Mater. Sci., 18, 1-50 (1983).
38. S. Swaroop, M. Kilo, C. Argirusis, G. Borchardt, and, A. H. Chokshi, " Lattice and Grain Boundary Diffusion of Cations in 3YTZ Analyzed Using SIMS ", Acta Mater., 53, 4976-4985 (2005).
39. S. Primdahl, A. Thölen, and, T. G. Langdon, " Microstructural Examination of a Superplastic Yttria-Stabilized Zirconia-Implications for the Superpalsticity Mechanism," Acta Metall. Mater., 43, 1211-1218 (1995).
40. 2 Polycrystals," J. Mater. Sci. Lett., 7, 607-609 (1988).
41. M. Nauer, and, C. Carry, " Creep Parameters of Yttria Doped Zirconia Materials and Superplastic Deformation Mechanics," Scripta Metall. Mater., 24, 1459-1463 (1990).
42. A. Lakki, R. Schaller, M. Nauer, and, C. Carry, " High Temperature Superplastic Creep and Internal Friction of Yttria Doped Zirconia Polycrystals," Acta Metal. Mater., 41, 2845-2853 (1993).
43. 2," Mater. Sci. Eng. A, 234-366, 1026-1029 (1997).
44. 3-Stabilized Zirconia Ceramics," Phil. Mag. A, 79, 1591-1608 (1999).
45. M. Jiménez-melendo, and, A. Domínguez-Rodríguez, " High Temperature Mechanical Characteristics of Superplastic Yttria-Stabilized Zirconia. An Examination of the Flow Process," Acta Mater., 48, 3201-3210 (2000).
46. R. Chaim, R. Ramamooethy, A. Goldstein, I. Eldror, and, A. Gurman, " Uniaxial Plastic Deformation in the Zirconia-Based Nanocrystalline Ceramics Containing a Silicate Glass," J. Euro. Ceram. Soc., 23, 647-657 (2003).
47. W. J. Kim, J. Wadsworth, and, O. D. Sherby, " Tensile Ductility of Superplastic Ceramics and Metallic Alloys," Acta Mater., 39, 199-208 (1991).
48. D. J. Schissler, A. H. Chokshi, T. G. Nieh, and, J. Wadsworth, " Microstructural Aspects of Superplastic Tensile Deformation and Cavitation Failure in a Fine-Grained Yttria Stabilized Tetragonal Zirconia," Acta Metall. Mater., 39, 3227-3236 (1991).
49. K. Hiraga, and, K. Nakano, " Tensile Failure in a Superplastic Alumina," Zeitschrift für Metallkunde, 95, 559-564 (2004).
50. A. H. Chokshi, " Cavity Nucleation and Growth in Superplasticity," Mater. Sci. Eng. A, 410-411, 95-99 (2005).
51. K. Hiraga, and, K. Nakano, " Cavitation Damage Mechanisms in a Superplastic Zirconia (3Y-TZP)," Mater. Sci. Forum, 243-245, 387-392 (1997).
52. J. W. Hancock, " Creep Cavitation Without a Vacancy Flux," Metal Sci., 10, 319-325 (1976).
53. H. Riedel, Fracture at High Temperatures. pp. 93-98. Springer, Berlin, 1987.
54. A. G. Evans, J. R. Rice, and, J. P. Hirth, " Suppression of Cavity Formation in Ceramics: Prospects for Superplasticity," J. Am. Ceram. Soc., 63, 368-375 (1980).
55. K. S. Chan, and, R. A. Page, " Creep Damage Development in Structural Ceramics," J. Am. Ceram. Soc., 76, 803-826 (1993).