Preparation and properties of EPDM/NBR/Organoclay Nanocomposites

International Polymer Processing

Volumn 27, Issue 2, 2012, Pages 187-195

  Ersali, M ^a   Fazeli, N ^a   Naderi, Gh ^b  

^a ISLAMIC AZAD UNIVERSITY   (Iran)

^b IRAN POLYMER AND PETROCHEMICAL INSTITUTE   (Iran)

Author keywords

[No Author keywords available]

Indexed keywords

CLOISITE; CROSS-LINK DENSITIES; CURE CHARACTERISTICS; CURE TIME; PREPARATION AND PROPERTIES; XRD;

CURING; MECHANICAL PROPERTIES;

NANOCOMPOSITES;

EID: 84861001742     PISSN: 0930777X     EISSN: None     Source Type: Journal    
DOI: 10.3139/217.2464     Document Type: Article

References (41)

1. Abdul Kader, M., Nah, C., "Influence of Clay on the Vulcanization Kinetics of Fluoroelastomer Nanocomposites", Polymer, 45, 2237-2247 (2004), http://dx.doi.org/10.1016/j.polymer.2004.01.052
2. Abdul Rahman, H., et al., "Influence of Phase Morphology on the Properties of Natural Rubber and Epoxidised Natural Rubber Blends", J. Nat. Rubb. Res., 9, 213-225 (1994)
3. Acharya, H., et al., "Synthesis and Evaluation of High-performance EPDM/ Organoclay Nanoscale Composites", J Appl Polym. Sci., 93, 2429-2436 (2004), DOI:http://dx.doi.org/10.1002/app.20774
4. Ahmadi, S. J., et al., "Synthesis of EPDM/Organoclay Nanocomposites: Effect of the Clay Exfoliation on Structure and Physical Properties", Iran. Polym. J., 13, 415-422 (2004)
5. Arroyo, M., et al., "Organo-Montmorillonite as Substitute of Carbon Black in Natural Rubber Compounds", Polymer, 44, 2447-2453 (2003), DOI:http://dx.doi.org/10.1016/S0032-3861(03)00090-9
6. Botros, S. H., et al., "Properties and Morphologies of Elastomer Blends Modified with EPDM-g-Poly [2-dimethylamino ethyl methacrylate]", J. Appl. Polym. Sci., 114, 2547-2554 (2009), DOI:http://dx.doi.org/10.1002/app.30820
7. Botros, S. H., Tawfic, M. L., "Preparation and Characteristics of EPDM/NBR Rubber Blends with BIIR as Compatibilizer", Polym. Plast. Tech. Eng., 44, 1525-1541 (2005)
8. Chakraborty, S., et al., "Study of the Properties of in situ Sodium Activated and Organomodified Bentoniteclay-SBR Rubber Nanocomposites -Part I: Characterization and Rheometric Properties", Polym. Test., 29, 181-187 (2010), DOI:http://dx.doi.org/10.1016/j.polymertesting.2009.10.008
9. Chang, Y. W., et al., "Preparation and Properties of EPDM/Organo-Montmorillonite Hybrid Nanocomposites", Polym. Int., 51, 319-324 (2002), DOI:http://dx.doi.org/10.1002/pi.831
10. Choi, D., et al., "Vulcanization Kinetics of Nitrile Rubber/Layered Clay Nanocomposites", J. Appl. Polym. Sci., 98, 1688-1696 (2005), DOI:http://dx.doi.org/10.1002/app.22341
11. Choudalakis, G., Gotsis, A. D., "Permeability of Polymer/Clay Nanocomposites", Eur. Polym. J., 45, 967-984 (2009), DOI:http://dx.doi.org/10.1016/j.eurpolymj.2009.01.027
12. Gatos, K. G., et al., "Characteristics of Ethylene Propylene Diene Monomer Rubber/ Organoclay Nanocomposites Resulting From Different Processing Conditions and Formulations", Polym. Int., 53, 1191-1197 (2004), DOI:http://dx.doi.org/10.1002/pi.1556
13. Ghosh, P., "Conducting Carbon Black Filled EPDM Vulcanizates: Assessment of Dependence of Physical and Mechanical Properties and Conducting Character on Variation of Fillers Loading", Eur. Polym. J., 36, 1043-1054 (2000), DOI:http://dx.doi.org/10.1016/S0014-3057(99)00157-3
14. Gopakumar, T. G., et al., "Influence of Clay Exfoliation on the Physical Properties of Montmorillonite/Polyethylene Composites", Polymer, 43, 5483-5491 (2002), DOI:http://dx.doi.org/10.1016/S0032-3861(02)00403-2
15. Hwang, W. G., et al., "Mechanical, Thermal, Barrier Properties of NBR/Organosilicate Nanocomposites", Polym. Eng. Sci., 44, 2117-2124 (2004), DOI:http://dx.doi.org/10.1002/pen.20217
16. Kang, D., et al., "Properties and Dispersion of EPDM/Modified-Organoclay Nanocomposites", Macromol. Mater. Eng., 292, 329-338 (2007), DOI:http://dx.doi.org/10.1002/mame.200600355
17. Kim, J. T., et al., "Preparation and Characteristics of Nitrile Rubber (NBR) Nanocomposites Based on Organophilic Layered Clay", Polym. Int., 52, 1058-1063 (2003a), DOI:http://dx.doi.org/10.1002/pi.1110
18. Kim, J. T., et al., "Morphology and Rheological Properties of Nanocomposites Based on Nitrile Rubber and Organophilic Layered Silicates", Polym. Int., 52, 1203-1208 (2003b), DOI:http://dx.doi.org/10.1002/pi.1249
19. Liang, Y. R., et al., "Preparation and Properties of Nanocomposites Based on Different Polarities of Nitrile-Butadiene Rubber with Clay", J. Appl. Polym. Sci., 112, 3087-3094 (2009), DOI:http://dx.doi.org/10.1002/app.29575
20. Li, P., et al., "High-performance EPDM/Organoclay Nanocomposites by Melt Extrusion", Appl. Clay Sci., 40, 38-44 (2008), DOI:http://dx.doi.org/10.1016/j.clay.2007.07.002
21. Manoj, K. C., et al., "Aromatic Liquid Transport through Filled EPDM/NBR Blends", J. Polym. Res., DOI:http://dx.doi.org/10.1007/s10965-009-9283-x
22. Manoj, K. C., Unnikrishnan, G., "Cure Characteristics, Morphology and Mechanical Properties of Ethylene-Propylene-Diene-Monomer Rubber / Acrylonitrile Butadiene Rubber Blends", J. Appl. Polym. Sci., 105, 908-914 (2007), DOI:http://dx.doi.org/10.1002/app.26135
23. Mitchell, J. M., "Nitrile-EPDM Polymer Blends Fundamental Consideration for Development of Key Properties", J. Elast. Plast., 9, 329-340 (1977)
24. Morgan, A. B., "Flame Retarded Polymer Layered Silicate Nanocomposites: A Review of Commercial and Open Literature Systems", Polym. Adv. Technol., 17, 206-217 (2006), DOI:http://dx.doi.org/10.1002/pat.685
25. Mousa, A., "Cure Characteristics and Thermal Properties of Sulfur-Cured EPDM-Based Composites by Compounding with Layered Nano-Organoclays", Polym. Plast. Tech. Eng., 45, 911-915 (2006), DOI:http://dx.doi.org/10.1080/00986440600724344
26. Mousa, A., Karger-Kocsis, J., "Rheological and Thermodynamical Behavior of Styrene Butadiene Rubber Organoclay Nanocomposites", J. Macromol. Mat. Eng., 286, 260-266 (2001), DOI:http://dx.doi.org/10.1002/1439-2054(20010401)286:4<260::AID-MAME260>3.0.CO;2-X
27. Naderi, Gh., et al., "Studies on Dynamic Vulcanization of PP/NBR Thermoplastic Elastomer Blends", Iran. Polym. J., 8, 37-42 (1999)
28. Nah, C., et al., "Rapid Report Fracture Behavior of NBR/clay Nanocomposite", Polym. Int., 50, 1265-1268 (2001), DOI:http://dx.doi.org/10.1002/pi.809
29. Nah, C., et al., "Preparation and Properties of NBR Hybrid Nanocomposites with Organoclays", Polym. Int., 52, 1359-1364 (2003), DOI:http://dx.doi.org/10.1002/pi.1227
30. Nair, T. M., et al., "Dynamic Mechanical Analysis of Ethylene-Propylene-Diene Monomer Rubber and Styrene-Butadiene Rubber Blends", J. Appl. Polym. Sci., 112, 72-81 (2009), DOI:http://dx.doi.org/10.1002/app.29367
31. Othman, A. B., "Product Performance Property Profile of a Laminated Rubber Bearing", Polym. Test., 20, 159-166 (2001), DOI:http://dx.doi.org/10.1016/S0142-9418(00)00017-9
32. Ouddane, M., Rancourt, Y., "Sorption and Diffusion of a Brake Fluid in EPDM Elastomers", J. Appl. Polym. Sci., 79, 1178-1187 (2001), DOI:http://dx.doi.org/10.1002/1097-4628(20010214)79:7<1178::AID-APP40>3.0.CO;2-N
33. Sirisinha, C., et al., "Oil Resistance Controlled by Phase Morphology in Natural Rebber/ Nitrile Rubber Blends", J. Appl. Polym. Sci., 87, 83-89 (2003), DOI:http://dx.doi.org/10.1002/app.11673
34. Song, M., et al., "Preparation and Characterization of Poly(styreneco-butadiene) and Polybutadiene Rubber/Clay Nanocomposites", Polym. Int., 54, 560-568 (2005), DOI:http://dx.doi.org/10.1002/pi.1732
35. Tabsan, N., et al., "Abrasion Behavior of Layered Silicate Reinforced", Nat. Rubb. Wear, 269, 394-404 (2010)
36. Teh, P. L., et al., "Physical Properties of Natural Rubber/ Organoclay Nanocomposites Compatibilized with Epoxidized Natural Rubber", J. Appl. Polym. Sci., 100, 1083-1092 (2006), DOI:http://dx.doi.org/10.1002/app.23452
37. Usuki, A., et al., "Synthesis of Nylon-6-Clay Hybrid", J. Mater. Res., 8, 1179-1183 (1993), DOI:http://dx.doi.org/10.1557/JMR.1993.1179
38. Usukai, A., et al., "Preparation and Properties of EPDM-Clay Hybrids", Polymer, 43, 2185-2189 (2002), DOI:http://dx.doi.org/10.1016/S0032-3861(02)00013-7
39. Wang, Y., et al., "Structure and Properties of Strain-induced Crystallization Rubber-Clay Nanocomposites by Co-coagulating the Rubber Latex and Clay Aqueous Suspension", J. Appl. Polym. Sci., 96, 318-323 (2005), DOI:http://dx.doi.org/10.1002/app.21408
40. Woods, M. E., Davidson, J. A., "Fundamental Considerations for the Convulcanization of Elastomer Blends, II. Lead Oxide-activated Cures of NBR-EPDM Blends", Rubb. Chem. Tech., 49, 112-117 (1976), DOI:http://dx.doi.org/10.5254/1.3534938
41. Zheng, H., et al., "Influence of Clay Modification on the Structure and Mechanical Properties of EPDM/Montmorillonite Nanocomposites", Polym. Test., 23, 217-223 (2004), DOI:http://dx.doi.org/10.1016/S0142-9418(03)00097-7