Microfluidic organic light emitting diode (OLED) using liquid organic semiconductors

Proceedings of the IEEE International Conference on Micro Electro Mechanical Systems (MEMS)

Volumn , Issue , 2012, Pages 1069-1072

  Kasahara, T ^a   Mizuno, J ^a   Hirata, S ^b   Edura, T ^b   Matsunami, S ^b   Adachi, C ^b   Shoji, S ^a  

^a WASEDA UNIVERSITY   (Japan)

^b KYUSHU UNIVERSITY   (Japan)

Author keywords

[No Author keywords available]

Indexed keywords

APPLIED VOLTAGES; EMITTING LAYER; INDIUM TIN OXIDE; LIGHT EMITTERS;

INDIUM COMPOUNDS; LIQUIDS; MEMS; MICROCHANNELS; MICROFLUIDICS; ORGANIC LIGHT EMITTING DIODES (OLED); TIN; TIN OXIDES;

ELECTROLUMINESCENCE;

EID: 84860479671     PISSN: 10846999     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1109/MEMSYS.2012.6170256     Document Type: Conference Paper

References (10)

1. A. Sugimoto, H. Ochi, S. Fujimura, A. Yoshida, T. Miyadera, and M. Tsuchida, "Flexible OLED Displays Using Plastic Substrates", IEEE J. Sel. Top. QuantumElectron., vol. 10, pp. 107-114, 2004.
2. R. Okumura, S. Takamatsu, E. Iwase, K. Matsumoto, and I. Shimoyama, "Solution Electrochemiluminescent Microfluidic Cell for Flexible and Stretchable Display", Proc. MEMS 2009, pp. 946-950.
3. K. Nishimura, Y. Hamada, T. Tsujioka, S. Matsuta, K. Shibata, and T. Fuyuki, "Solution Electrochemiluminescent Cell with a High Luminance Using an Ion Conductive Assistant Dopant", Jpn. J. Appl. Phys., vol. 40. pp. L 1323- L 1326. 2001.
4. S. Hirata, K. Kubota, H.H. Jung, O. Hirata, K. Goushi, M. Yahiro, and C. Adachi, "Improvement of Electroluminescence Performance of Organic Light-Emitting Diodes with a Liquid-Emitting Layer by Introduction of Electrolyte and a Hole-Blocking Layer", Adv. Mater., vol. 23, pp. 889-893, 2011.
5. D. Xu and C. Adachi, "Organic Light-Emitting Diodes with Liquid Emitting Layer", Appl. Phys. Lett., vol. 95, pp. 053304, 2009.
6. H. Sato, H. Matsumura, S. Keino, and S. Shoji, "An All SU-8 Microfluidic Chip with Built-in 3D Fine Microstructures", J. Micromech. Microeng., vol. 16, pp. 2318-2322, 2006.
7. C. Priest, P.J. Gruner, E.J. Szill, S.A. Al-Bataineh, J.W. Bradley, J. Ralston, D.A. Steele, and R.D. Short, "Microplasma Patterning of Bonded Microchannels Using High-precision "Injected" Electrodes", Lab. Chip, vol. 11, pp. 541-544, 2011.
8. H. Shinohara, T. Kasahara, S. Shoji, and J. Mizuno, "Studies on Low-temperature Direct Bonding of VUV/O3-, VUV- and O2 Plasma Pre-treated Poly-methylmethacrylate", J. Micromech. Microeng., vol. 21, pp. 085028, 2011.
9. L. Tang and N.Y. Lee, "A Facile Route for Irreversible Bonding of plastic-PDMS hybrid microdevices at Room Temperature" Lab. Chip, vol. 10, pp. 1274-1280, 2011.
10. N.Y. Lee and B.H. Chung, "Novel Poly (dimethylsiloxane) Bonding Strategy via Room Temperature "Chemical Gluing"", Langmuir, vol. 25, pp. 3861-3866, 2009.