EIS characterization of the poisoning effects of Co and Co2 on a PBI based HT-PEM fuel cell

ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology, FUELCELL 2010

Volumn 1, Issue , 2010, Pages 27-36

  Andreasen, Søren Juhl ^a   Mosbæk, Rasmus ^a   Vang, Jakob Rabjerg ^a   Kær, Søren Knudsen ^a   Araya, Samuel Simon ^a  

^a AALBORG UNIVERSITY   (Denmark)

Author keywords

CO poisoning; EIS; Electrochemical impedance spectroscopy; Fuel cells; HT PEMFC

Indexed keywords

ACTIVE AREA; CELL IMPEDANCE; CO POISONING; EIS; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPIES (EIS); ELECTROCHEMICAL SYSTEMS; HIGH FREQUENCY RESISTANCE; HIGH TEMPERATURE PROTON EXCHANGE MEMBRANE; HT-PEMFC; IMPEDANCE SPECTRUM; INDIVIDUAL FACTORS; INTERMEDIATE FREQUENCIES; LABVIEW PROGRAM; MASS FLOW CONTROLLER; MEMBRANE ELECTRODE ASSEMBLIES; NON-INTRUSIVE DIAGNOSTIC TOOLS; OPERATING POINTS; OPERATIONAL PARAMETERS; POISONING EFFECTS; PT CATALYSTS; SINGLE CELLS;

ADSORPTION; CARBON DIOXIDE; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; FUEL CELLS; PLATINUM;

PROTON EXCHANGE MEMBRANE FUEL CELLS (PEMFC);

EID: 84860274528     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.1115/FuelCell2010-33054     Document Type: Conference Paper

References (32)

1. Wainright, J. S., Wang, J. T., Weng, D., Savinell, R. F., and Litt, M., 1995. "Acid-doped polybenzimidazoles: A new polymer electrolyte". Journal of The Electrochemical Society, 142(7), pp. L121-L123.
2. Li, Q., Jensen, J. O., Savinell, R. F., and Bjerrum, N. J., 2009. "High temperature proton exchange membranes based on polybenzimidazoles for fuel cells". Progress in Polymer Science, 34(5), pp. 449 - 477.
3. Korsgaard, A. R., Nielsen, M. P., and Kr, S. K., 2008. "Part one: A novel model of HTPEM-based micro-combined heat and power fuel cell system". International Journal of Hydrogen Energy, 33, pp. 1909-1920.
4. Korsgaard, A. R., Nielsen, M. P., and Kr, S. K., 2008. "Part two: Control of a novel HTPEM-based micro combined heat and power fuel cell system". International Journal of Hydrogen Energy, 33(7), pp. 1921 - 1931.
5. Zhang, J., Xie, Z., Zhang, J., Tang, Y., Song, C., Navessin, T., Shi, Z., Song, D., Wang, H., Wilkinson, D. P., Liu, Z.-S., and Holdcroft, S., 2006. "High temperature pem fuel cells". Journal of Power Sources, 160, pp. 872-891.
6. Krishnan, P., Park, J.-S., and Kim, C.-S., 2006. "Performance of a poly(2,5-benzimidazole) membrane based high temperature pem fuel cell in the presence of carbon monoxide". Journal of Power Sources, 159(2), pp. 817 - 823.
7. Garcia, A. C., Paganin, V. A., and Ticianelli, E. A., 2008. "Co tolerance of pdpt/c and pdptru/c anodes for pemfc". Electrochimica Acta, 53(12), pp. 4309 - 4315.
8. Das, S. K., Reis, A., and Berry, K., 2009. "Experimental evaluation of co poisoning on the performance of a high temperature proton exchange membrane fuel cell". Journal of Power Sources, 193(2), pp. 691 - 698.
9. Andreasen, S. J., Kr, S. K., and Nielsen, M. P., 2008. "Experimental evaluation of a pt-based heat exchanger methanol reformer for a htpem fuel cell stack". ECS Transactions, 12(1), pp. 571-578.
10. Pan, C., He, R., Li, Q., Jensen, J. O., Bjerrum, N. J., Hjulmand, H. A., and Jensen, A. B., 2005. "Integration of high temperature PEM fuel cells with a methanol reformer". Journal of Power Sources, 145(2), pp. 392 - 398. Selected papers presented at the Fuel Cells Science and Technology Meeting.
11. Avgouropoulos, G., Papavasiliou, J., Daletou, M. K., Kallitsis, J. K., Ioannides, T., and Neophytides, S., 2009. "Reforming methanol to electricity in a high temperature pem fuel cell". Applied Catalysis B: Environmental, 90(3-4), pp. 628 - 632.
12. Yuan, X., Wang, H., Sun, J. C., and Zhang, J., 2007. "Ac impedance technique in pem fuel cell diagnosis - a review". International Journal of Hydrogen Energy, 32(17), pp. 4365 - 4380. Fuel Cells.
13. Wu, J., Yuan, X. Z., Wang, H., Blanco, M., Martin, J. J., and Zhang, J., 2008. "Diagnostic tools in pem fuel cell research: Part i electrochemical techniques". International Journal of Hydrogen Energy, 33(6), pp. 1735 - 1746.
14. Yuan, X., Sun, J. C., Blanco, M., Wang, H., Zhang, J., and Wilkinson, D. P., 2006. "Ac impedance diagnosis of a 500 w pem fuel cell stack: Part i: Stack impedance". Journal of Power Sources, 161(2), pp. 920 - 928.
15. Yuan, X., Sun, J. C., Wang, H., and Zhang, J., 2006. "Ac impedance diagnosis of a 500 w pem fuel cell stack: Part ii: Individual cell impedance". Journal of Power Sources, 161(2), pp. 929 - 937.
16. Meland, A.-K., and Kjelstrup, S., 2007. "Three steps in the anode reaction of the polymer electrolyte membrane fuel cell. effect of co". Journal of Electroanalytical Chemistry, 610(2), pp. 171 - 178.
17. Zhang, J., Zhang, L., Bezerra, C. W., Li, H., Xia, Z., Zhang, J., Marques, A. L., and Marques, E. P., 2009. "Eis-assisted performance analysis of non-noble metal electrocatalyst (fe-n/c)-based pem fuel cells in the temperature range of 23-80°C". Electrochimica Acta, 54(6), pp. 1737 - 1743.
18. Hou, J., Song, W., Yu, H., Fu, Y., Hao, L., Shao, Z., and Yi, B., 2008. "Ionic resistance of the catalyst layer after the pem fuel cell suffered freeze". Journal of Power Sources, 176(1), pp. 118 - 121.
19. Modestov, A., Tarasevich, M., Filimonov, V., and Zagudaeva, N., 2009. "Degradation of high temperature mea with pbi-h3po4 membrane in a life test". Electrochimica Acta, 54(27), pp. 7121 - 7127.
20. 4 high-temperature pemfc". International Journal of Hydrogen Energy, 31(13), pp. 1855 - 1862. Fuel Cells.
21. 4/PBI celtec-P MEAs for μ-CHP applications". Fuel Cells, 9, pp. 325 - 348.
22. 4 high temperature pemfcs based on electrochemical methods". Journal of Power Sources, 160(2), pp. 1026 - 1034. Special issue including selected papers presented at the International Workshop on Molten Carbonate Fuel Cells and Related Science and Technology 2005 together with regular papers.
23. Jespersen, J. L., Schaltz, E., and Kr, S. K., 2009. "Electrochemical characterization of a polybenzimidazole-based high temperature proton exchange membrane unit cell". Journal of Power Sources, 191(2), pp. 289 - 296.
24. Zhang, J., Tang, Y., Song, C., and Zhang, J., 2007. " Polybenzimidazole-membrane-based pem fuel cell in the temperature range of 120 - 200 °C". Journal of Power Sources, 172(1), pp. 163 - 171. ACS San Francisco 2006, Fuel and Cell Symposium. American Chemical Society National Meeting. San Francisco, CA Sept 10-14 2006.
25. Andreasen, S. J., Jespersen, J. L., Schaltz, E., and Kr, S. K., 2009. "Characterisation and modelling of a high temperature pem fuel cell stack using electrochemical impedance spectroscopy". Fuel Cells, 9, pp. 463 - 473.
26. cell > 100 °C) proton exchange membrane fuel cells: Electrochemical impedance spectroscopy". Journal of The Electrochemical Society, 152(7), pp. A1329-A1340.
27. O'Hayre, R. P., Cha, S.-W., Colella, W. G., and Prinz, F. B., 2008. Fuel Cell Fundamentals. John Wiley & Sons, Inc.
28. Orazem, M. E., and Tribollet, B., 2008. Electrochemical Impedance Spectroscopy. John Wiley & Sons, Inc.
29. Hsieh, S.-S., Yang, S.-H., and Feng, C.-L., 2006. "Characterization of the operational parameters of a h2/air micro pemfc with different flow fields by impedance spectroscopy". Journal of Power Sources, 162(1), pp. 262 - 270.
30. Korsgaard, A. R., Refshauge, R., Nielsen, M. P., Bang, M., and Kr, S. K., 2006. "Experimental characterization and modeling of commercial polybenzimidazole-based mea performance". Journal of Power Sources, 162(1), pp. 239 - 245.
31. Jalani, N. H., Ramani, M., Ohlsson, K., Buelte, S., Pacifico, G., Pollard, R., Staudt, R., and Datta, R., 2006. "Performance analysis and impedance spectral signatures of high temperature pbi-phosphoric acid gel membrane fuel cells". Journal of Power Sources, 160(2), pp. 1096 - 1103. Special issue including selected papers presented at the International Workshop on Molten Carbonate Fuel Cells and Related Science and Technology 2005 together with regular papers.
32. Xu, H., Song, Y., Kunz, H. R., and Fenton, J. M., 2006. "Operation of PEM fuel cells at 120 - 150 °C to improve CO tolerance". Journal of Power Sources, 159(2), pp. 979 - 986.