A unified mechanism for the formation of oscillation marks

Metallurgical and Materials Transactions B: Process Metallurgy and Materials Processing Science

Volumn 43, Issue 1, 2012, Pages 109-122

  Ramirez Lopez, Pavel E ^a   Mills, Kenneth C ^b   Lee, Peter D ^b,c   Santillana, Begona ^d  

^a MEFOS   (Sweden)

^b IMPERIAL COLLEGE LONDON   (United Kingdom)

^c UNIVERSITY OF MANCHESTER   (United Kingdom)

^d SWINDEN TECHNOLOGY CENTRE   (Netherlands)

Author keywords

[No Author keywords available]

Indexed keywords

FORMATION MECHANISM; INDUSTRIAL PRACTICES; MOLD OSCILLATION; MOLD POWDER CONSUMPTION; MOLD SIMULATORS; MULTI-PHYSICS MODELING; NUMERICAL MODELING; OSCILLATION MARK; QUANTITATIVE RESULT; SLAG FLOW; SLAG INFILTRATION; SLAG PHASE; STEEL PRODUCTS; THERMAL FLUCTUATIONS; TRANSVERSE CRACKING; UNIFIED THEORY;

CONTINUOUS CASTING; MOLDS; MORPHOLOGY; SLAGS; SOLIDIFICATION;

OSCILLATING FLOW;

EID: 84860125947     PISSN: 10735615     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11663-011-9583-5     Document Type: Article

References (38)

1. A. Badri, T.T. Natarajan, C.C. Snyder, K.D. Powers, F.J. Mannion, and A.W. Cramb: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 373-83.
2. A. Badri, T.T. Natarajan, C.C. Snyder, K.D. Powers, F.J. Mannion, and A.W. Cramb: Metall. Mater. Trans. B, 2005, vol. 36B, p. 355.
3. J.M. Hill, Y.H. Wu, and B. Wiwatanapataphee: Metall. Mater. Trans. A, 1999, vol. 36A, pp. 311-26.
4. H. Tomono: Ph.D. Dissertation: Ecole Polytechnique Federale de Lausanne Lausanne, Switzerland, 1979.
5. P. Ackermann: Ph.D. Dissertation: Ecole Polytechnique Federale de Lausanne Lausanne, Switzerland, 1983.
6. B.G. Thomas, C. Lee, J. Park, G. Lee, S. Kim, and H. Shin: Mater. Sci. Technol., 2004, vol. 2, pp. 11-26.
7. J. Sengupta and B.G. Thomas: JOM, 2006, vol. 58, pp. 16-18.
8. R. Aigner and H. Steinruck: Eurotherm 82, Eds. R.A. Białecki and A. Nowak, Gliwice-Cracow, Poland, 2005.
9. H.J. Shin, S.H. Kim, B.G. Thomas, G.G. Lee, J.M. Park, and J. Sengupta: ISIJ Int., 2006, vol. 46, no. 11, pp. 1635-44.
10. J. Sengupta, C. Ojeda, and B.G. Thomas: Int. J. Cast Met. Res., 2009, vol. 22 (1-4), pp. 8-14.
11. C. Ojeda, J. Sengupta, B.G. Thomas, J. Barco, and J.L. Arana: AISTech 2006 Steelmaking Conference Proceedings, Cleveland, OH, AIST, Warrendale, PA, 2006, vol. 1, pp. 1017-28.
12. J. Elfsberg: Ph.D. Dissertation, Royal Institute of Technology, Stockholm, Sweden, 2003.
13. K. Schwerdtfeger and H. Sha: Metall. Mater. Trans. B, 2000, vol. 31B, pp. 813-26.
14. Y. Le Papillon, W. Jaaeger, M. Konig, B. Weisberger, and M. Jauhola: Final Report, RFCS, 2003, EUR 20897, p. 161.
15. G.-G. Lee, B.G. Thomas, S.-H. Kim, H.-J. Shin, S.-K. Baek, C.-H. Choi, D.-S. Kim, and S.-J. Yu: Acta Mater., 2007, vol. 55 (20), pp. 6705-12.
16. R. Carli, C. Carna, F. Magni, and A.C. Mapelli: 6th European Conf. on Continuous Casting, Riccione, Italy, 2008.
17. C. Marchionni, P. Rocabois, J.N. Pontoire, M. Roscini, L.F. Sancho, J. Diaz, M. Ridolfi, M. De Santis, O. Putz, S. Rodl, F. Ruppel, K. Spitzer, K. Scholtz, and K. Schwerdtfeger: Final Report, RFCS, 2004, EUR 20947.
18. P.E. Ramirez-Lopez, P.D. Lee, and K.C. Mills: in Modeling of Casting, Welding and Advanced Solidification Processes XII, D.M. Maijer and S. Cockroft, eds., Vancouver, Canada, 2009, vol. 12, TMS, pp. 61-68.
19. P.E. Ramirez Lopez, P.D. Lee, and K.C. Mills: ISIJ Int., 2010, vol. 50 (3), pp. 425-34.
20. P.E. Ramirez-Lopez, P.D. Lee, K.C. Mills, and B. Santillana: ISIJ Int., 2010, vol. 50 (12), pp. 1797-1804.
21. R.D. Morales and P.E. Ramirez-Lopez: AISTech Conf. Proc., Association for Iron & Steel Technology, Cleveland, OH, 2006, p. 20.
22. ANSYS Fluent 6.3.26 - User's Guide, 1995-2007.
23. K. Spitzer, K. Schwerdtfeger, and J. Holzhauser: Steel Res., 1999, vol. 70 (10), pp. 430-36.
24. P.E. Ramirez Lopez: Ph.D. Dissertation, Imperial College London, London, UK, 2010, p. 170.
25. G.G. Lee, H. Shin, B.G. Thomas, S. Kim, D. Kim, and S. Yu: Iron & Steel Technol. Conf, TMS, Indianapolis, IN, 2007, pp. 1-10.
26. P.H. Dauby, W.H. Emling, and R. Sobolewski: Ironmaking Steelmaking, 1986, pp. 26-36.
27. J. Sengupta and H.J. Shin: Acta Mater., 2006, vol. 54 (4), p. 1165.
28. K.C. Mills, P.E. Ramirez-Lopez, and P.D. Lee: Sano Symposium, Tokyo, Japan, International Research Center for Sustainable Materials, University of Tokyo, 2008.
29. T. Miyake, M. Morishita, H. Nakata, and M. Kokita: ISIJ Int., 2006, vol. 46 (12), pp. 1817-22.
30. C.-A. Dacker and T. Sohlgren: 5th ECCC, Nice, France, 2005.
31. G.G. Lee, H. Shin, S.-H. Kim, S.-K. Kim, W.-Y. Choi, and B.G. Thomas: Ironmaking Steelmaking, 2009, vol. 36 (1), pp. 40-49.
32. F. Neumann: 79th Steelmaking Conf., Pittsburgh, PA, 1996, p. 86.
33. P. Courbe: Revue de Metall. CIT, 1996, p. 93.
34. S. Itoyama: CAMP-ISIJ, 2001, vol. 14 (4), p. 893.
35. S. Kunstreich and P.H. Dauby: 4th European Conf. Continuous Casting, Birmingham, UK, 2002, pp. 489-99.
36. J.D. Madill: Workshop on Steelmaking, EC Sci. Tech. Comm., Luxembourg, 1994, pp. 104-09.
37. C.-A. Dacker: KIMAB, 2003, Final report: IM-2003-154, pp. 11-12.
38. E. Takeuchi and J.K. Brimacombe: Metall. Trans. B, 1985, vol. 16B, pp. 605-25.