Sintering behavior and mechanical properties of zirconia compacts fabricated by uniaxial press forming

Journal of Advanced Prosthodontics

Volumn 2, Issue 3, 2010, Pages 81-87

  Oh, Gye Jeong ^a   Yun, Kwi Dug ^a   Lee, Kwang Min ^a   Lim, Hyun Pil ^a   Park, Sang Won ^a  

^a Chonnam National University   (South Korea)

Author keywords

Linear sintering shrinkage; Mechanical properties; Sintering behavior; Zirconia block

Indexed keywords

EID: 84859954334     PISSN: 20057806     EISSN: 20057814     Source Type: Journal    
DOI: 10.4047/jap.2010.2.3.81     Document Type: Article

References (28)

1. Lehner CR, Schärer P. All-ceramic crowns. Curr Opin Dent 1992;2:45-52.
2. Bindl A, Mörmann WH. An up to 5-year clinical evaluation of posterior in-ceram CAD/CAM core crowns. Int J Prosthodont 2002;15:451-6.
3. Mörmann WH, Bindl A. All-ceramic, chair-side computeraided design/computer-aided machining restorations. Dent Clin North Am 2002;46:405-26.
4. Pera P, Gilodi S, Bassi F, Carossa S. In vitro marginal adaptation of alumina porcelain ceramic crowns. J Prosthet Dent 1994;72:585-90.
5. Rinke S, Hüls A, Jahn L. Marginal accuracy and fracture strength of conventional and copy-milled all-ceramic crowns. Int J Prosthodont 1995;8:303-10.
6. Sulaiman F, Chai J, Jameson LM, Wozniak WT. A comparison of the marginal fit of In-Ceram, IPS Empress, and Procera crowns. Int J Prosthodont 1997;10:478-84.
7. Marquardt P, Strub JR. Survival rates of IPS empress 2 all-ceramic crowns and fixed partial dentures: results of a 5-year prospective clinical study. Quintessence Int 2006;37:253-9.
8. Sorensen JA, Kang SK, Torres TJ, Knode H. In-Ceram fixed partial dentures: three-year clinical trial results. J Calif Dent Assoc 1998;26:207-14.
9. Sorensen JA, Cruz M, Mito WT, Raffeiner O, Meredith HR, Foser HP. A clinical investigation on three-unit fixed partial dentures fabricated with a lithium disilicate glass-ceramic. Pract Periodontics Aesthet Dent 1999;11:95-106.
10. Tinschert J, Natt G, Mautsch W, Augthun M, Spiekermann H. Fracture resistance of lithium disilicate-, alumina-, and zirconiabased three-unit fixed partial dentures: a laboratory study. Int J Prosthodont 2001;14:231-8.
11. Guazzato M, Albakry M, Ringer SP, Swain MV. Strength, fracture toughness and microstructure of a selection of all-ceramic materials. Part II. Zirconia-based dental ceramics. Dent Mater 2004;20:449-56.
12. Tinschert J, Zwez D, Marx R, Anusavice KJ. Structural reliability of alumina-, feldspar-, leucite-, mica- and zirconia-based ceramics. J Dent 2000;28:529-35.
13. Porter DL, Heuer AH. Mechanisms of toughening partially stabilized zirconia (PSZ). J Am Ceram Soc 1977;60:183-4.
14. Cales B. Colored zirconia ceramics for dental applications. Bioceramics 1998;11:591-4.
15. Kosmac T, Oblak C, Jevnikar P, Funduk N, Marion L. The effect of surface grinding and sandblasting on flexural strength and reliability of Y-TZP zirconia ceramic. Dent Mater 1999;15:426-33.
16. Garvie RC, Hannink RH, Pascoe RT. Ceramic steel? Nature 1975;258:703-4.
17. Kitazaki H, Takahashi H, Hasegawa S, Nishimura F. Effect of amount of grinding on flexural strength of dental ceramics. J Med Dent Sci 2001;48:7-13.
18. Chevalier J, Cales B, Drouin JM. Low-temperature aging of YTZP ceramics. J Am Ceram Soc 1999;82:2150-4.
19. Piconi C, Maccauro G. Zirconia as a ceramic biomaterial. Biomaterials 1999;20:1-25.
20. Duke ES. The status of CAD/CAM in restorative dentistry. Compend Contin Educ Dent 2001;22:968-72.
21. Suttor D, Bunke K, Hoescheler S, Hauptmann H, Hertlein G. LAVA-the system for all-ceramic ZrO2 crown and bridge frameworks. Int J Comput Dent 2001;4:195-206.
22. Heydecke G, Butz F, Binder JR, Strub JR. Material characteristics of a novel shrinkage-free ZrSiO4 ceramic for the fabrication of posterior crowns. Dent Mater 2007;23:785-91.
23. nd ed. 1995.
24. nd ed. USA; John Wiley&Sons Inc; 2005. p. 282-356.
25. Fréchette V. Failure analysis of brittle materials. Advances in ceramics vol. 28, American Ceramic Society, Westerville, OH, 1990.
26. Ban S, Anusavice KJ. Influence of test method on failure stress of brittle dental materials. J Dent Res 1990;69:1791-9.
27. Giordano R. Materials for chairside CAD/CAM-produced restorations. J Am Dent Assoc 2006;137:14S-21S.
28. Zirconia-Physical and mechanical property comparison of the different types of zirconias. http://www.azom.com, 2003.