A model for mass and energy balances of bio-Drying

19th Annual North American Waste-to-Energy Conference, NAWTEC19

Volumn , Issue , 2011, Pages 63-70

  Viganò, Federico ^a   Consonni, Stefano ^a   Ragazzi, Marco ^b   Rada, Elena Cristina ^b  

^a POLITECNICO DI MILANO   (Italy)

^b UNIVERSITY OF TRENTO   (Italy)

Author keywords

[No Author keywords available]

Indexed keywords

BACTERIAL REACTION; BIO-DRYING; CHEMICAL COMPOSITIONS; HEAT RELEASE; HIGH MOISTURE; MASS AND ENERGY BALANCE; MECHANICAL-BIOLOGICAL TREATMENT; MODEL-BASED OPC; PROCESS PERFORMANCE; SIDE EFFECT; SIMPLE RULES; THERMAL LOSS; VOLATILE MATTERS; WASTE STREAM;

DRYING; ENERGY BALANCE; MOISTURE; PHASE TRANSITIONS; THERMAL EVAPORATION;

MUNICIPAL SOLID WASTE;

EID: 84859528638     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (23)

1. Rada E C, Ragazzi M, Panaitescu V, Apostol T, 2005, "MSW bio-drying and bio-stabilization: an experimental comparison", International Conference Towards an Integrated Urban Solid Waste Management System: ISWA 2005, Buenos Aires, Argentina; 6-10 November 2005.
2. Rada E C, Franzinelli A, Taiss M, Ragazzi M, Panaitescu V, Apostol T, 2007, "Lower Heating Value Dynamics during Municipal Solid Waste Bio-Drying", Environmental Technology, 28(4), pp 463-469. (Pubitemid 46705174)
3. Ragazzi M, Venturi M, Rada E C, Apostol T, 2007, "Modeling of Landfilling Acceptance of Residue from Refused Derived Fuel Generation", International Symposium MBT 2007: Mechanical Biological Treatment and Automatic Sorting of Municipal Solid Waste, Hannover, 22-24 May, 2007, Cuvillier Verlag, Germany, pp. 575-584.
4. Rada E C, Ragazzi M, Panaitescu V, 2009, "MSW Bio-Drying: an Alternative Way for Energy Recovery Optimization and Landfilling Minimization", Scientific Bulletin - "Politehnica", University of Bucharest, Series C, Electrical Engineering, 71(4), pp. 113-120.
5. Shao L-M, Ma Z-H, Zhang H, Zhang D-Q, He P-J, 2010, "Bio-Drying and Size Sorting of Municipal Solid Waste with High Water Content for Improving Energy Recovery", Waste Man., 30, pp. 1165-1170.
6. Zhang D-Q, He P-J, Shao L-M, 2009, "Sorting Efficiency and Combustion Properties of Municipal Solid Waste during Bio-Drying", Waste Man., 29, pp. 2816-2823.
7. Consonni S, Giugliano M, Grosso M, 2005, "Alternative Strategies for Energy Recovery from Municipal Solid Waste. Part A: Mass and Energy Balances & Part B: Emissions and Cost Estimates", Waste Man., 25, pp. 123-148.
8. Grosso M, Rigamonti L, Paoli S, Teardo G, 2010, "Co-Combustion of RDF in a Coal Fired Power Plant: an Evaluation Using the Life Cycle Approach", Paper 201, Proceedings of Venice 2010, "Third International Symposium on Energy from Biomass and Waste", Venice, Italy; 8-11 November 2010.
9. Consonni S, Giugliano M, Massarutto A, Ragazzi M, Saccani C, in press, "Material and Energy Recovery in Integrated Waste Management System. Project Overview and Main Results", Waste Man.
10. Saccani C, Bianchini A, Pellegrini M, 2011, "Material and Energy Recovery in Integrated Waste Management System. An Italian Case Study on the Quality of MSW Data", Waste Man, DOI: 10.1016/j.wasman.2011.03.012.
11. Consonni S and Viganò F, in press, "Material and Energy Recovery in Integrated Waste Management System. The Potential for Energy Recovery", Waste Man.
12. Ragazzi M, Rada E C, Antolini D, 2011, "Material and Energy Recovery in Integrated Waste Management System. An Innovative Approach for the Characterization of the Gaseous Emissions from Residual MSW Bio-Drying". Waste Man., DOI:10.1016/j.wasman.2011.02.024.
13. Giugliano M, Cernuschi S, Grosso M, Rigamonti L, 2011, "Material and Energy Recovery in Integrated Waste Management System. An Evaluation Based on Life Cycle Assessment. Waste Man. DOI:10.1016/j.wasman.2011.02.029.
14. Massarutto A, De Carli A, Graffi M, in press, "Material and Energy Recovery in Integrated Waste Management System. Economic Analysis", Waste Man.
15. Rada E C, Ragazzi M, Panaitescu V, Apostol T, 2006, "Experimental Characterization of Municipal Solid Waste Bio-Drying", Waste Management and Environment III, Southampton, Mass.: Wit press, pp. 295-302, Malta, 21-23 June, 2006. (Pubitemid 350108671)
16. Rada E C, Ragazzi M, Apostol T, 2009, "MSW Bio-Drying in Different Countries", Third International Symposium MBT&MRF, Mechanical Biological Waste Treatment and Material Recovery Facilities, Hanover, Gottingen, Cullivier Verlag, pp. 565-570, Hanover, 12-15 May 2009.
17. Ragazzi M, Rada E C, 2009, "MSW Bio-Drying Eco-Balance and Kyoto Protocol", Third International Symposium MBT&MRF, Mechanical Biological Waste Treatment and Material Recovery Facilities, Hanover, Gottingen, Cullivier Verlag, pp. 372-379, Hanover, 12-15 May 2009.
18. Macchi E, Consonni S, Lozza G, Chiesa P, 1995, "An Assessment of the Thermodynamic Performance of Mixed Gas-Steam Cycles. Part A: Intercooled and Steam-Injected Cycles", J. of Eng. for Gas Turbines and Power, 117, pp. 489-498.
19. Campanari S, Macchi E, 1998, "Thermodynamic Analysis of Advanced Power Cycles Based upon Solid Oxide Fuel Cells, Gas Turbines and Rankine Cycles", ASME Paper 98-GT-585.
20. Consonni S, Larson E D, 1996, "Biomass-Gasifier/Aeroderivative Gas Turbine Combined Cycle: Part A - Technologies and Performance Modelling; Part B - Performance Calculations and Economic Assessment", J. of Eng. for Gas Turbines and Power, 118, pp. 507-525.
21. Consonni S, 1992, "Performance Prediction of Gas/Steam Cycles for Power Generation", MAE Dept. Ph. D. Thesis n. 1983-T, Princeton University, Princeton (NJ), USA.
22. Stølen S, Grande T, 2004, "Chemical Thermodynamics of Materials: Macroscopic and Microscopic Aspects", John Wiley & Sons, Ltd, The Atrium, Southern Gate, Chichester, West Sussex, England.
23. Pin-Jing H, Jun-Feng X, Li-Ming S, Guo-Jian L, Duu-Jong L, 2006, "Dissolved Organic Matter (DOM) in Recycled Leachate of Bioreactor Landfill", Water Research, 40(7), pp. 1465-1473..