Numerical prediction of elastic modulus of asphalt concrete with imperfect bonding

Construction and Building Materials

Volumn 35, Issue , 2012, Pages 45-51

  Zhu, Xing Yi ^a,b   Chen, Long ^c  

^a SHANGHAI UNIVERSITY   (China)

^b ZHEJIANG UNIVERSITY   (China)

^c Zhejiang Univ   (China)

Author keywords

Air voids; Asphalt concrete; Fast multipole boundary element method; Interfacial bonding strength

Indexed keywords

AIR VOIDS; ASPHALT MASTIC; ELASTIC BEHAVIOR; FAST MULTIPOLE; GEOMETRICAL MODELS; GRID DISCRETIZATION; HIGHER EFFICIENCY; IMPERFECT INTERFACE; INTERFACIAL BONDING STRENGTH; LAYER MODEL; MECHANICAL BEHAVIOR; MICRO-MECHANICAL; NUMERICAL PREDICTIONS;

BOUNDARY ELEMENT METHOD; DIFFUSION BONDING; MASTIC ASPHALT; NUMERICAL MODELS;

ASPHALT CONCRETE;

EID: 84859496163     PISSN: 09500618     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.conbuildmat.2011.12.059     Document Type: Article

References (30)

1. X. Shu, and B. Huang Dynamic modulus prediction of hma mixtures based on the viscoelastic micromechanical model J Mater Civ Eng 20 8 2008 530 538
2. X. Shu, and B. Huang Predicting dynamic modulus of asphalt mixtures with differential method Road Mater Pavement Des 10 2 2009 337 359
3. You Z. Development of a micromechanical modeling approach to predict asphalt mixture stiffness using discrete-element method. Ph.D. dissertation. Urbana, IllL: Univ. of Illinois at Urbana-Champaign; 2003.
4. L. Mishnaevsky, and S. Schmauder Continuum mesomechanical finite-element modeling in materials development: a state-of-the-art review Appl Mech Rev 54 1 2001 49 69
5. S. Kose, M. Guler, H.U. Bahia, and E. Masad Distribution of strains within asphalt binders in hma using image and finite-element techniques Trans Res Rec: J Trans Res Board 1728 2000 21 27
6. E. Masad, V.K. Jandhyala, N. Dasgupta, N. Somadevan, and N. Shashidhar Charaterization of air void distribution in asphalt mixes using x-ray computed tomography J Mater Civ Eng 14 2 2002 122 129
7. R. Bandyopadhyaya, A. Das, and S. Basu Numerical simulation of mechanical behaviour of asphalt mix Constr Build Mater 22 2008 1051 1058
8. Z.P. You, and W.G. Buttlar Discrete-element modeling to predict the modulus of asphalt concrete mixtures J Mater Civ Eng 16 2 2004 140 146
9. Q.L. Dai, H.S. Martin, P. Venkit, and S. Arun Prediction of damage behaviors in asphalt materials using a micromechanical finite-element model and image analysis J Eng Mech 131 7 2005 668 677
10. Q.L. Dai, and Z.P. You Prediction of creep stiffness of asphalt mixture with micromechanical finite-element and discrete-element models J Eng Mech 133 2 2007 163 173
11. J. Chen, T.Y. Pan, and X.M. Huang Numerical investigation into the stiffness anisotropy of asphalt concrete from a microstructural perspective Constr Build Mater 25 2011 3059 3065
12. J. Murali Krishnan, and C. Lakshmana Rao Mechanics of air voids reduction of asphalt concrete using mixture theory Int J Eng Sci 38 2000 1331 1354
13. B.S. Huang, X. Shu, G.Q. Li, and L.S. Chen Analytical modeling of three-layered HMA mixtures Int J Geomech 7 2 2007 140 148
14. F. Lane, and D. Leguillon Homogenized constitutive law for a partially cohesive composite material Int J Solids Struct 18 1982 443 458
15. Y.J. Liu A new fast multipole boundary element method for solving large-scale two-dimensional elastostatic problems Int J Num Methods in Eng 65 2006 863 881
16. Y.J. Liu, and N. Nishimura The fast multipole boundary element method for potential problems: a tutorial Eng An Bound Elem 30 2006 371 381
17. Huang ZY, Wang XF, Zhu XY, Liu Z. Application of digital image processing technique to simulate the macro-mechanical behavior of asphalt concrete. In: ASCE Conf. Proc. of the 2011 GeoHunan; 2011. < http://dx.doi.org/10.1061/ 47623(402)20 >.
18. X. Shu, and B.S. Huang Micromechanics-based dynamic modulus prediction of polymeric asphalt concrete mixtures Composites B: Eng 39 2008 704 713
19. D.A. Anderson, and W.H. Goetz Mechanical behavior and reinforcement of mineral filler-asphalt mixtures Asphalt Paving Technol 42 1973 37 66
20. R. Lytton Materials property relationships for modeling the behavior of asphalt aggregate mixtures in pavements 1990 Internal Memorandum Strategic Highway Research Program Washington D.C.
21. W.G. Buttlar, D. Bozkurt, G.G. Al-Khateeb1, and A.S. Waldhoff Understanding asphalt mastic behavior through micromechanics Transportation Research Record: J Trans Res Board 1681 1999 157 169
22. W.G. Buttlar, and R. Roque Evaluation of empirical and theoretical models to determine asphalt mixture stiffnesses at low temperature Asphalt Paving Technol 65 1996 99 141
23. Y.Q. Li, and J.B. Metcalf Two-step approach to prediction of asphalt concrete modulus from two-phase micromechanical models J Eng Mech 17 2005 407 415
24. J.D. Achenbach, and H. Zhu Effect of interfacial zone on mechanical behavior and failure of fiber-reinforced composites J Mech Physics Solids 37 3 1989 381 393
25. J.D. Achenbach, and H. Zhu Effect of interphases on micro and macromechanical behavior of hexagonal-array fiber composites ASME J Appl Mech 57 1990 956 963
26. H. Zhu, and J.D. Achenbach Effect of fiber-matrix interphase defects on microlevel stress states at neighboring fibers J Compo Mater 25 1991 224 238
27. N. Shashidhar, and A. Shenoy On using micromechanical models to describe dynamic mechanical behavior of asphalt mastics Mech Mate 34 2002 657 669
28. G. Li, Y. Li, J.B. Metcalf, and S.S. Pang Elastic modulus prediction of asphalt concrete J Mater Civ Eng 11 6 1999 236 241
29. B.S. Huang, G.Q. Li, and L.N. Mohammad Analytical modeling and experimental study of tensile strength of asphalt concrete composite at low temperatures Composites B: Eng 34 2003 705 714
30. AASHTO TP91-94. Standard test method for determining the resilient modulus of bituminous mixtures by indirect tension. In: Annual book of AASHTO standards, vol. 3; 2000.