Dimensional stability of methyl methacrylate hardened hybrid poplar wood

BioResources

Volumn 7, Issue 1, 2012, Pages 504-520

  Ding, Wei Dan ^a   Koubaaa, Ahmed ^a   Chaala, Abdelkader ^b  

^a UNIVERSITÉ DU QUÉBEC EN ABITIBI TÉMISCAMINGUE   (Canada)

^b Service de Recherche et d'expertise en Transformation des produits forestiers (SEREX)   (Canada)

Author keywords

Anti swelling efficiency; Dimensional stability; Hardening; Hybrid poplar; MMA; Swelling properties; Water repellent efficiency; Water uptake

Indexed keywords

AFTER-TREATMENT; ANTI-SWELLING; EFFECTS OF HARDENING; HARDENING TREATMENT; HYBRID POPLAR; HYBRID POPLAR CLONES; METHYL METHACRYLATES; MMA; SWELLING PROPERTIES; VOLUMETRIC SWELLING; WATER MIGRATION; WATER REPELLENTS; WATER UPTAKE;

CLONING; DIMENSIONAL STABILITY; EFFICIENCY; ESTERS; HARDENING; SWELLING; WATERPROOFING; WOOD;

FORESTRY;

CLONES; DIMENSIONAL STABILITY; ESTERS; HARDENING; POPULUS; SWELLING; WATER; WATER PROOFING; WATER REPELLENCE;

POPULUS;

EID: 84859048844     PISSN: None     EISSN: 19302126     Source Type: Journal    
DOI: None     Document Type: Article

References (38)

1. Alden, H. A. (1995). Hardwoods of North America, U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, Wisconsin.
2. Balatinecz, J. J., and Kretschmann, D. E. (2001). "Chapter 9: Properties and utilization of poplar wood," Poplar Culture in North America, 277-291.
3. Bhat, D. K., and Kumar, S. M. (2006). "Biodegradability of PMMA blends with some cellulose derivatives," J. Polym. Environ. 14(4), 385-392.
4. Cai, X., Riedl, B., Zhang, S. Y., and Wan, H. (2008). "The impact of the nature of nanofillers on the performance of wood polymer nanocomposites," Compos. Part A: Appl. S. 39(5), 727-737.
5. Deka, M., and Saikia, C. N. (2000). "Chemical modification of wood with thermosetting resin: Effect on dimensional stability and strength property," Biores. Technol. 73(2), 179-181.
6. Devi, R. R., and Maji, T. K. (2007). "Effect of glycidyl methacrylate on the physical properties of wood-polymer composites," Polym. Compos. 28(1), 1-5.
7. Ding, W. D., Koubaa, A., Chaala, A., Belem, T., and Krause, C. (2008). "Relationship between wood porosity, wood density and methyl methacrylate impregnation rate," Wood Mat. Sci. Eng. 3(1-2), 62-70.
8. Ellis, W. D. (1994). "Moisture sorption and swelling of wood-polymer composites," Wood Fiber Sci. 26(3), 333-341.
9. Elvy, S. B., Dennis, G. R., and Ng, L. T. (1995). "Effects of coupling agent on the physical properties of wood-polymer composites," J. Mat. Proc. Tech. 48(1-4), 365-371.
10. Frazer, R. Q., Byron, R.T., Osborne, P.B., and West, K.P. (2005). "PMMA: An essential material in medicine and dentistry," J. Long. Term. Eff. Med. Implants. 15(6), 629-639.
11. Gao, Z., and Li, D. (2007). "Chemical modification of poplar wood with foaming polyurethane resins," J. Appl. Polym. Sci. 104(5), 2980-2985.
12. Glover, J., White, D. O., and Langrish, T. A. G. (2002). "Wood versus concrete and steel in house construction: A life cycle assessment," J. For. 100(8), 34-41.
13. Guedes, R. M., Gomes, M., and Simões, J. A. (2006). "DMTA analysis for long-term mechanical behaviour prediction of PMMA-based bone cements," J. Biomater. Sci., Polym. Ed., 17(10), 1173-1189.
14. He W., Nakao T., Yoshinobu M., and Zhang Q. (2011). "Treatment of fast-growing poplar with monomers using in situ polymerization. Part I: Dimensional stability and resistance to biodegradation," For. Prod. J. 61(2), 113-120.
15. Hu, S., Chen, W., Liu, W., and Li, H. (2007). "Microwave irradiation treatment of wood flour and its application in PVC-wood flour composites," J. Wuhan University Technology, Mat. Sci. Ed. 22(1), 148-152.
16. Jaeblon, T. (2010). "Polymethylmethacrylate: Properties and contemporary uses in orthopaedics," J. Am. Acad. Orthop. Surg. 18, 297-305.
17. Koubaa, A., Ding, W. D., Chaala, A., and Bouafif, H. (2012). "Surface properties of methyl methacrylate hardened hybrid poplar wood," J. Appl. Polym. Sci. 123(3), 1428-1436.
18. Koubaa, A., Hernández, R. E., and Beaudoin, M. (1998). "Shrinkage of fast-growing hybrid poplar clones," For. Prod. J. 48(4), 82-87.
19. Kretschmann, D. E. (2010). "Chapter 05: Mechanical properties of wood," In: Wood Handbook, Wood as an Engineering Material, U.S.D.A, For. Prod. Lab., Madison, Wisconsin, 508.
20. Li, J., Li, Y., Meng, X, and Liu, Y. (2010). "Durability of wood-PMMA composite," Appl. Mech. Mater. 26-28, 830-834.
21. Li, Y., Wu, Q., Li, J., Liu, Y., Wang, X.-M., and Liu, Z. (2011a). "Improvement of dimensional stability of wood via combination treatment: Swelling with maleic anhydride and grafting with glycidyl methacrylate and methyl methacrylate," Holzforschung. Online: DOI: 10.1515/HF.2011.123
22. Li, Y. F., Liu, Y. X., Wang, X. M., Wu, Q. L., Yu, H. P., and Li, J. (2011b). "Woodpolymer composites prepared by the in situ polymerization of monomers within wood," J. Appl. Polym. Sci. 119(6), 3207-3216.
23. Li, Y., Dong, X., Liu, Y., Li, J., and Wang, F. (2011c). "Improvement of decay resistance of wood via combination treatment on wood cell wall: Swell-bonding with maleic anhydride and graft copolymerization with glycidyl methacrylate and methyl methacrylate," Int. Biodeterior. Biodegrad. 65(7), 1087-1094.
24. Li, Y. F., Li, J., Liu, Y. X., Liu, Z. B., Wang, X. M., and Wang, B. G. (2011d). "Thermoforming of polymer from monomers in wood porous structure and characterisation for wood-polymer composite," Mat. Res. Innovations, 15(SUPPL. 1), S446-S449.
25. McCaskie, A. W., Richardson, J. B., and Gregg, P. J. (1998). "Further uses of polymethylmethacrylate in orthopaedic surgery," J. R. Coll. Surg. Edinb. 43(1), 37-39.
26. Pliura, A., Yu, Q., Zhang, S. Y., MacKay, J., Périnet, P., and Bousquet, J. (2005). "Variation in wood density and shrinkage and their relationship to growth of selected young poplar hybrid crosses," For. Sci. 51(5), 472-482.
27. Rodriguez, R., Vargas, S., Rubio, E., Pacheco, S., and Estevez, M. (2006). "Abrasion properties of alkyd- and acrylic-based polymer-ceramic nano-hybrid coatings on wood surfaces," Mater. Res. Innovations 10(2), 48-50.
28. Rosen, H. N. (1976). "Moisture adsorption and swelling in polyethylene glycol and polymethyl methacrylate treated wood at high relative humidity," Wood Fiber Sci., 7(4), 249-255.
29. SAS Institute Inc. (2004). "Version 9.1.3 SAS Service Pack 4." SAS institute Inc., ed., Cary, NC, USA
30. Schaudy, R., and Proksch, E. (1982). "Wood-plastic combinations with high dimensional stability," Ind. Eng. Chem. Prod. R.D. 21(3), 369-375.
31. Seidenstücker, T., and Fritz, H. G. (1998). "Innovative biodegradable materials based upon starch and thermoplastic poly(ester-urethane) (TPU)," Polym. Degrad. Stab. 59(1-3), 279-285.
32. Sonowal, J., and Gogoi, P. K. (2010). "Dimensional stability, thermal degradation and termite resistant studies of chemically treated wood," Int. J. Chem. 2 (2), 218-225.
33. Thakore, I. M., Desai, S., and Devi, S. (2001). "Compatibility and biodegradability of PMMA-starch cinnamate blends in various solvents," J. Appl. Polym. Sci. 79(3), 488-496.
34. Xu, Q., Cui, Y., Wang, X., Xia, Z., Han, C., and Wang, J. (2010). "Moisture absorption properties of wood-fiber-reinforced recycled polypropylene matrix composites," J. Vinyl Addit. Technol. 16(1), 50-57.
35. Yang, Y., and Dan, Y. (2003). "Preparation of PMMA/SiO2 composite particles via emulsion polymerization," Colloid Polym. Sci. 281(8), 794-799.
36. Yildiz, Ü. C., Yildiz, S., and Gezer, E. D. (2005). "Mechanical properties and decay resistance of wood-polymer composites prepared from fast growing species in Turkey," Biores. Technol. 96(9), 1003-1011.
37. Zhang, Y., Zhang, S. Y., Chui, Y. H., and Wan, H. (2006a). "Effect of impregnation and in-situ polymerization of methacrylates on hardness of sugar maple wood," J. Appl. Polym. Sci. 99(4), 1674-1683.
38. Zhang, Y., Zhang, S. Y., Yang, D. Q., and Wan, H. (2006b). "Dimensional stability of wood-polymer composites," J. Appl. Polym. Sci. 102(6), 5085-5094.