Analysis of Bed Load Equations and River Bed Level Variations Using Basin-Scale Process-Based Modelling Approach

Water Resources Management

Volumn 26, Issue 5, 2012, Pages 1143-1163

  Kabir, Md Aynul ^a   Dutta, Dushmanta ^a,b   Hironaka, Sadayuki ^c   Pang, Alexis ^d  

^a UNIVERSITY OF BALLARAT   (Australia)

^b CSIRO   (Australia)

^c The Newjec Consultants Inc   (Japan)

^d MONASH UNIVERSITY   (Australia)

Author keywords

Abukuma River Basin; Bed load; Kinematic wave approximation; Process based model; River bed level variation

Indexed keywords

BED LOAD; KINEMATIC WAVE APPROXIMATION; PROCESS-BASED MODELS; RIVER BASINS; RIVER BED LEVEL VARIATION;

ANOXIC SEDIMENTS; SEDIMENT TRANSPORT; SEDIMENTOLOGY; WATERSHEDS;

RIVERS;

BEDLOAD; EMPIRICAL ANALYSIS; HILLSLOPE; NUMERICAL MODEL; RIVER BANK; RIVER BASIN; RIVER BED; SEDIMENT TRANSPORT; SHEAR STRESS; SPATIAL DISTRIBUTION; SUSPENDED LOAD; SUSPENDED SEDIMENT;

ABUKUMA BASIN; HONSHU; JAPAN; TOHOKU;

EID: 84858619507     PISSN: 09204741     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11269-011-9951-6     Document Type: Article

References (54)

1. Abrahams AD, Li G, Krishnan C, Atkinson JF (2001) A sediment transport equation for interrill overland flow on rough surfaces. Earth Surf Proc Land 26(13): 1443-1459.
2. Ariffin J, Ghani AA, Zakaria NA, Yahya AS (2002) Evaluation of equations on total bed material load. Paper presented at the International Conference on Urban Hydrology for the 21st Century, 14-16 October 2002, Kuala Lumpur.
3. Ashida K, Michiue M (1973) Study on hydraulic resistance and bedload transport rate in alluvial streams. Japan Soc Civ Eng 206: 59-69.
4. Barry JJ, Buffington JM, King JG (2004) A general power equation for predicting bed load transport rates in gravel bed rivers. Water Resour Res 40.
5. Barry JJ, Buffington JM, Goodwin P, King JG, Emmett WW (2008) Performance of bed-load transport equations relative to geomorphic significance: predicting effective discharge and its transport rate. J Hydraul Eng, ASCE 134(5): 601-615.
6. Chanson H (1999) Sediment transport mechanism 1. Bed-load transport. The hydraulics of open channel flow: an introduction. Edward Arnold, London, pp 195-209.
7. Dickinson RE, Kennedy PJ, WIlson MF (1986) Biosphere-Atmosphere Transfer Scheme (BATS) for the NCAR community climate model. NCAR technical note, NCAR/TN-275 + STR, 69.
8. Duan JG, Scott S (2007) Selective bed-load transport in Las Vegas Wash, a gravel-bed stream. J Hydrol 342(3-4): 320-330. doi: 10. 1016/j. jhydrol. 2007. 06. 001.
9. Dutta D, Herath S, Musiake K (2000) Flood inundation simulation in a river basin using a physically based distributed hydrologic model. Hydrolog Process 14: 497-519.
10. Duan JG, Chen L, Scott S (2006) Application of surface-based bed load transport equations to desert gravel-bed stream. J Hydraul Res 44(5): 624-630.
11. th IAHR Symposium on River, Coastal and Estuarine Morphodynamics: RCEM 2007: 1193-1201.
12. Ferro V (1998) Evaluating overland flow sediment transport capacity. Hydrolog Process 12(12): 1895-1910.
13. Gaeuman D, Andrews ED, Krause A, Smith W (2009) Predicting fractional bed load transport rates: application of the Wilcock-Crowe equations to a regulated gravel bed river. Water Resour Res 45(6).
14. Gao P, Zhan C, Menon S (1996) An overview of cell-based modelling with GIS. In: Goodchild M et al (eds) GIS and environmental modelling: progress and research issues. GIS World Books, Fort Collins, pp 325-331.
15. Garcia MH (2008) Sediment transport and morphodynamics, Sedimentation engineering processes, measurements, modeling and practice. In: Garcia MH (ed) ASCE Manual and Reports on Engineering Practice, vol 110. American Society of Civil Engineers, ASCE, New York.
16. Gomez B (1991) Bedload transport. Earth Sci Rev 31(2): 89-132. doi: 10. 1016/0012-8252(91)90017-A.
17. Gomez B, Church M (1989) An assessment of bed-load sediment transport formulae for gravel bed rivers. Water Resour Res 25: 1161-1186.
18. Gumiere SJ, Le Bissonnais Y, Raclot D (2009) Soil resistance to interrill erosion: model parameterization and sensitivity. Catena 77(3): 274-284. doi: 10. 1016/j. catena. 2009. 02. 007.
19. Habersack HM, Laronne JB (2002) Evaluation and improvement of bed load discharge formulas based on Helley-Smith sampling in an Alpine Gravel Bed River. J Hydraul Eng, ASCE 128(5): 484-499.
20. Habibi M, Sivakumar M (1994) New formulation for estimation of bed load transport. Paper presented at the International Conference on Hydraulics in Civil Engineering: 'Hydraulics Working with the Environment', Brisbane, Australia.
21. Herbertson JG (1969) A critical review of conventional bed load formulae. J Hydrol 8(1): 1-26. doi: 10. 1016/0022-1694(69)90028-6.
22. Huang HQ (2010) Reformulation of the bed load equation of Meyer-Peter and Müller in light of the linearity theory for alluvial channel flow. Water Resour Res 46.
23. Jenson SK, Domingue JO (1988) Extracting topographic structure from digital elevation model data for geographic information system analysis. Photogramm Eng Rem Sens 54(11): 1593-1600.
24. Kabir A, Dutta D (2010) Analysis of sediment dynamics in the Latrobe river basin, Australia using a process-based distributed modeling approach. Paper presented at the 30th Annual United States Society on Dams USSD Collaborative Management of Integrated Watersheds.
25. Kabir MA, Dutta D, Hironaka S (2009) Analysis of sediment dynamics in a river basin using a process-based approach. Paper presented at the 32nd Hydrology and Water Resources Symposium, 30 Nov - 3 Dec, 2009, Newcastle, Australia.
26. Kabir MA, Dutta D, Hironaka S (2011a) Process-based distributed modelling approach for analysis of sediment dynamics in a river basin. Hydrol Earth Syst Sci 15(4): 1307-1321.
27. Kabir MA, Dutta D, Hironaka S (2011b) Evaluation of sediment transport capacity equations using basin-scale process-based modelling approach. 34th IAHR World Congress, 26 June - 1 July 2011, Brisbane, Australia.
28. Khorram S, Ergil M (2011) Determining the predominant governing parameters of the bed-load equations for sediment-laden rivers on the continental shelf. J Coast Res, West Palm Beach (Florida), ISSN 0749-0208, 27(2), 276-290.
29. Kristensen K, Jensen S (1975) A model for estimating actual evapotranspiration from potential evapotranspiration. Nord Hydrol 6: 70-88.
30. Martin Y (2003) Evaluation of bed load transport formulae using field evidence from the Vedder River, British Columbia. Geomorphology 53(1-2): 75-95. doi: 10. 1016/S0169-555X(02)00348-3.
31. Merz R, Blöschl G, Parajka J (2006) Spatio-temporal variability of event runoff coefficients. J Hydrol 331(3-4): 591-604. doi: 10. 1016/j. jhydrol. 2006. 06. 008.
32. Meyer-Peter E, Müller R (1948) Formulas for bed-load transport. Paper presented at the 2nd Meeting of the International Association of Hydraulic Structures Research, Madrid.
33. Morgan RPC (2001) A simple approach to soil loss prediction: a revised Morgan-Morgan-Finney model. Catena 44(4): 305-322. doi: 10. 1016/S0341-8162(00)00171-5.
34. Morgan RPC, Quinton JN, Smith RE, Govers G, Poesen WA, Auerswald K, Chisci G, Torri D, Styczen ME (1998) The European Soil Erosion Model (EU-ROSEM): a dynamic approach for predicting sediment transport from fields and small catchments. Earth Surf Proc Land 23: 527-544.
35. Nord G, Esteves M, Lapetite J, Hauet A (2009) Effect of particle density and inflow concentration of suspended sediment on bedload transport in rill flow. Earth Surf Proc Land 34: 253-263.
36. Parker G (1990) Surface-based bedload transport relation for gravel rivers. J Hydraul Res 28(4): 417-436.
37. Parker G (2008) Transport of gravel and sediment mixtures. In: Garcia MH (ed) Sedimentation engineering: process, measurements, modeling and practice.
38. Parker G, Klingeman PC, McLean DG (1982) Bedload and size distribution in paved gravel-bed streams. J Hydraul Div, ASCE 108(4): 544-571.
39. Reid I, Powell DM, Laronne JB (1996) Prediction of bed-load transport by desert flash floods. J Hydraul Eng, ASCE 122(3): 170-173.
40. Saitoh Y, Tamura T, Nakano T (2010) Unraveling the supply and transport of beach sand by multiple use of grain-size, geochemistry, and strontium isotope: a case study in the south coast of Sendai Bay, northeast Japan. JSPS and CCOP/GSJ/AIST seminar on Monitoring and Evaluating Coastal Erosion in Deltas, November 24 to November 29, 2010.
41. Schmeeckle MW, Nelson JM (2003) Direct numerical simulation of bedload transport using a local, dynamic boundary condition. Sedimentology 50(2): 279-301.
42. Torri D, Sfalaga M, Del Sette M (1987) Splash detachment: runoff depth and soil cohesion. Catena 14: 149-155.
43. Turowski JM, Rickenmann D, Dadson SJ (2010) The partitioning of the total sediment load of a river into suspended load and bedload: a review of empirical data. Sedimentology 57(4): 1126-1146.
44. Wang X, Yang Q, Lu W, Wang X (2011) Effects of bed load movement on mean flow characteristics in mobile gravel beds. Water Resour Manag, Online First™, 10 June 2011.
45. Wilcock PR (1992) Bed-load transport of mixed-size sediment. In: Billi P, Hey RD, Thorne CR, Tacconi P (eds) Dynamics of gravel bed rivers. Wiley, Chichester, U. K.
46. Wilcock PR (2001) The flow, the bed, and the transport: interaction in flume and field. Paper presented at the 5th Gravel-Bed Rivers Workshop, Christchurch, NZ.
47. Wilcock PR, Crowe JC (2003) Surface-based transport model for mixed-size sediment. J Hydraul Eng, ASCE 129(2): 120-128.
48. Williamson DF, Parker RA, Kendrick JS (1989) The box plot: a simple visual method to interpret data. Ann Intern Med 110: 916-921.
49. Wong M, Parker G (2006) Reanalysis and correction of bed-load relation of Meyer-Peter and Müller using their own database. J Hydraul Eng, ASCE 132(11): 1159-1168.
50. Wu W (2008) Computational river dynamics. Taylor and Francis, UK.
51. Wu W, Rodi W, Wenka T (2000) 3D numerical modeling of flow and sediment transport in open channels. J Hydraul Eng, ASCE 126(1): 4-15.
52. Yang CT, Huang C (2001) Applicability of sediment transport formulas. Int J Sediment Res 16: 335-353.
53. Yeganeh-Bakhtiary A, Shabani B, Gotoh H, Wang SSY (2009) A three-dimensional distinct element model for bed-load transport. J Hydraul Res 47(2): 203-212.
54. Yorozuya A, Shintaku S, Ejima K, Fukami K, Kanazawa H (2009) Development of a sediment discharge measurement system with ADCP. FLUCOME 2009, 10th International Conference on Fluid Control, Measurements, and Visualization, Moscow, Russia.