Measurements and modeling study on a high-aromatic diesel fuel

Energy and Fuels

Volumn 26, Issue 3, 2012, Pages 1787-1797

  Windom, B C ^a   Huber, M L ^a   Bruno, T J ^a   Lown, A L ^b   Lira, C T ^b  

^a NATIONAL INSTITUTE OF STANDARDS AND TECHNOLOGY   (United States)

^b Michigan State University   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

CHEMICAL COMPOSITIONS; DESIGN AND APPLICATION; DISTILLATION CURVES; ENVIRONMENTAL CONCERNS; EXPERIMENTAL DATA; HEAT OF COMBUSTION; INTEGRAL PART; MIXTURE MODEL; MODELING STUDIES; RENEWABLE DIESELS; SUPPLY DISRUPTION; SURROGATE MODEL;

ANTIKNOCK RATING; DIESEL ENGINES; DISTILLATION; FUELS; THERMOCHEMISTRY; THERMODYNAMIC PROPERTIES; TRANSPORT PROPERTIES;

DIESEL FUELS;

EID: 84858405503     PISSN: 08870624     EISSN: 15205029     Source Type: Journal    
DOI: 10.1021/ef201861b     Document Type: Article

References (74)

1. Alander, T. J. A.; Leskinen, A. P.; Raunemaa, T. M.; Rantanen, L. Characterization of diesel particles: Effects of fuel reformulation, exhaust aftertreatment, and engine operation on particle carbon composition and volatility Environ. Sci. Technol. 2004, 38 (9) 2707-2714 (Pubitemid 38579873)
2. Chaumette, P.; Courty, P. R.; Raimbault, C. Synthetic or reformulated fuels: A challenge for catalysis. In Science and Technology in Catalysis 1998; Hattori, H.; Otsuka, K., Eds.; Elsevier Science Publishers B.V.: Amsterdam, The Netherlands, 1999; Vol. 121, pp 41-50.
3. Courty, P.; Chaumette, P.; Raimbault, C. Synthetic or reformulated fuels: A challenge for catalysis Oil Gas Sci. Technol. 1999, 54 (3) 357-363 (Pubitemid 129602534)
4. Durbin, T. D.; Collins, J. R.; Norbeck, J. M.; Smith, M. R. Effects of biodiesel, biodiesel blends, and a synthetic diesel on emissions from light heavy-duty diesel vehicles Environ. Sci. Technol. 2000, 34 (3) 349-355 (Pubitemid 30080168)
5. Isotalo, S.; Kuljukka-Rabb, T.; Rantanen, L.; Mikkonen, S.; Savela, K. The effect of diesel fuel reformulation on the exhaust measured by Ames mutagenicity and DNA adducts Int. J. Environ. Anal. Chem. 2002, 82 (2) 87-95 (Pubitemid 34415961)
6. Rossini, S. The impact of catalytic materials on fuel reformulation Catal. Today 2003, 77 (4) 467-484
7. x, high thermal efficiency, and low noise diesel combustion with oxygenated agents as main fuel SAE Tech. Pap. Ser. 1998, 10.4271/980506
8. Mueller, C. J.; Pitz, W. J.; Pickett, L. M.; Martin, G. C.; Siebers, D. L.; Westbrook, C. K. Effects of oxygenates on soot processes in DI diesel engines: Experiments and numerical simulations SAE Tech. Pap. Ser. 2003, 10.4271/2003-01-1791
9. Pitz, W. J.; Mueller, C. J. Recent progress in the development of diesel surrogate fuels Prog. Energy Combust. Sci. 2011, 37, 330-350
10. Cherepitsa, S. V.; Bychkov, S. M.; Kovalenko, A. N.; Mazanik, A. L.; Makoed, N. M.; Gremyako, N. N.; Kuzmenkov, D. E.; Luchinina, Y. L. Determination of inspection parameters of diesel fuels Chem. Technol. Fuels Oils 2003, 39 (6) 364-370
11. Karonis, D.; Lois, E.; Stournas, S.; Zannikos, F. Correlations of exhaust emissions from a diesel engine with diesel fuel properties Energy Fuels 1998, 12 (2) 230-238 (Pubitemid 128545389)
12. Karonis, D.; Lois, E.; Zannikos, F.; Alexandridis, A.; Sarimveis, H. A neural network approach for the correlation of exhaust emissions from a diesel engine with diesel fuel properties Energy Fuels 2003, 17 (5) 1259-1265
13. Sjogren, M.; Li, H.; Banner, C.; Rafter, J.; Westerholm, R.; Rannug, U. Influence of physical and chemical characteristics of diesel fuels and exhaust emissions on biological effects of particle extracts: A multivariate statistical analysis of ten diesel fuels Chem. Res. Toxicol. 1996, 9 (1) 197-207 (Pubitemid 26041287)
14. Song, C.; Hsu, C.; Mochida, I. Chemistry of Diesel Fuels; CRC Press (Taylor and Francis Group): Boca Raton, FL, 2000.
15. Bruno, T. J.; Ott, L. S.; Smith, B. L.; Lovestead, T. M. Complex fluid analysis with the advanced distillation curve approach Anal. Chem. 2010, 82, 777-783
16. Bruno, T. J.; Ott, L. S.; Lovestead, T. M.; Huber, M. L. The composition explicit distillation curve technique: Relating chemical analysis and physical properties of complex fluids J. Chromatogr., A 2010, 1217, 2703-2715
17. Bruno, T. J.; Ott, L. S.; Lovestead, T. M.; Huber, M. L. Relating complex fluid composition and thermophysical properties with the advanced distillation curve approach Chem. Eng. Technol. 2010, 33 (3) 363-376
18. Bruno, T. J.; Smith, B. L. Enthalpy of combustion of fuels as a function of distillate cut: Application of an advanced distillation curve method Energy Fuels 2006, 20, 2109-2116 (Pubitemid 44548809)
19. Bruno, T. J. Improvements in the measurement of distillation curves. 1. A composition-explicit approach Ind. Eng. Chem. Res. 2006, 45, 4371-4380 (Pubitemid 43966411)
20. Bruno, T. J.; Smith, B. L. Improvements in the measurement of distillation curves-Part 2: Application to aerospace/aviation fuels RP-1 and S-8 Ind. Eng. Chem. Res. 2006, 45, 4381-4388 (Pubitemid 43966412)
21. Smith, B. L.; Bruno, T. J. Improvements in the measurement of distillation curves: Part 3-Application to gasoline and gasoline + methanol mixtures Ind. Eng. Chem. Res. 2007, 46, 297-309
22. Smith, B. L.; Bruno, T. J. Improvements in the measurement of distillation curves: Part 4-Application to the aviation turbine fuel Jet-A Ind. Eng. Chem. Res. 2007, 46, 310-320
23. Windom, B. C.; Bruno, T. J. Improvements in the measurement of distillation curves. 5. Reduced pressure distillation curve method In. Eng. Chem. Res. 2011, 50, 1115-1126
24. Bruno, T. J.; Huber, M. L. Evaluation of the physicochemical authenticity of aviation kerosene surrogate mixtures. Part 2: Analysis and prediction of thermophysical properties Energy Fuels 2010, 24, 4277-4284
25. Huber, M. L.; Smith, B. L.; Ott, L. S.; Bruno, T. J. Surrogate mixture model for the thermophysical properties of synthetic aviation fuel S-8: Explicit application of the advanced distillation curve Energy Fuels 2008, 22, 1104-1114
26. Huber, M. L.; Lemmon, E. W.; Diky, V.; Smith, B. L.; Bruno, T. J. Chemically authentic surrogate mixture model for the thermophysical properties of a coal-derived liquid fuel Energy Fuels 2008, 22, 3249-3257
27. Huber, M. L.; Lemmon, E.; Ott, L. S.; Bruno, T. J. Preliminary surrogate mixture models for rocket propellants RP-1 and RP-2 Energy Fuels 2009, 23, 3083-3088
28. Huber, M. L.; Lemmon, E. W.; Bruno, T. J. Surrogate mixture models for the thermophysical properties of aviation fuel Jet-A Energy Fuels 2010, 24, 3565-3571
29. American Society for Testing and Materials (ASTM). ASTM D5186, Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography; ASTM International: West Conshohocken, PA, 2009.
30. American Society for Testing and Materials (ASTM). ASTM D613, Standard Test Method for Cetane Number of Diesel Fuel; ASTM International: West Conshohocken, PA, 2010.
31. Bruno, T. J.; Svoronos, P. D. N. CRC Handbook of Fundamental Spectroscopic Correlation Charts; CRC Press (Taylor and Francis Group): Boca Raton, FL, 2006.
32. Bruno, T. J.; Svoronos, P. D. N. CRC Handbook of Basic Tables for Chemical Analysis, 3 rd ed.; CRC Press (Taylor and Francis Group): Boca Raton, FL, 2011.
33. Bruno, T. J.; Wolk, A.; Naydich, A.; Huber, M. L. Composition-explicit distillation curves for mixtures of diesel fuel with dimethyl carbonate and diethyl carbonate Energy Fuels 2009, 23 (8) 3989-3997
34. Bruno, T. J.; Wolk, A.; Naydich, A. Composition-explicit distillation curves for mixtures of gasoline and diesel fuel with γ-valerolactone Energy Fuels 2010, 24, 2758-2767
35. Bruno, T. J.; Lovestead, T. M.; Riggs, J. R.; Jorgenson, E. L.; Huber, M. L. Comparison of diesel fuel oxygenate additives with the composition explicit distillation curve method. Part 1: Linear compounds with one to three oxygens Energy Fuels 2011, 25, 2493-2507
36. Bruno, T. J.; Lovestead, T. M.; Huber, M. L.; Riggs, J. R. Comparison of diesel fuel oxygenate additives with the composition explicit distillation curve method. Part 2: Cyclic compounds with one to two oxygens Energy Fuels 2011, 25, 2508-2517
37. Bruno, T. J.; Lovestead, T. M. Comparison of diesel fuel oxygenate additives with the composition explicit distillation curve method. Part 3: t -Butyl glycerols Energy Fuels 2011, 25, 2518-2525
38. Smith, B. L.; Ott, L. S.; Bruno, T. J. Composition-explicit distillation curves of diesel fuel with glycol ether and glycol ester oxygenates: Fuel analysis metrology to enable decreased particulate emissions Environ. Sci. Technol. 2008, 42 (20) 7682-7689
39. American Society for Testing and Materials (ASTM). ASTM D975, Standard Specification for Diesel Fuel Oils; ASTM International: West Conshohocken, PA, 2011.
40. Ott, L. S.; Smith, B. L.; Bruno, T. J. Composition-explicit distillation curves of mixtures of diesel fuel with biomass-derived glycol ester oxygenates: A fuel design tool for decreased particulate emissions Energy Fuels 2008, 22 (4) 2518-2526
41. Smith, B. L.; Ott, L. S.; Bruno, T. J. Composition-explicit distillation curves of commercial biodiesel fuels: Comparison of petroleum-derived fuel with B20 and B100 Ind. Eng. Chem. Res. 2008, 47 (16) 5832-5840
42. ILRC Committee of the Technical Working Group for Fire and Explosives (TWGFEX). Ignitable Liquids Reference Collection (ILRC); University of Central Florida: Orlando, FL, http://ilrc.ucf.edu/ (accessed September 2010).
43. Bruno, T. J. Method and apparatus for precision in-line sampling of distillate Sep. Sci. Technol. 2006, 41 (2) 309-314 (Pubitemid 43279579)
44. Smith, B. L.; Bruno, T. J. Advanced distillation curve measurement with a model predictive temperature controller Int. J. Thermophys. 2006, 27 (5) 1419-1434 (Pubitemid 44745982)
45. Ott, L. S.; Smith, B. L.; Bruno, T. J. Experimental test of the Sydney Young equation for the presentation of distillation curves J. Chem. Thermodyn. 2008, 40, 1352-1357
46. Young, S. Correction of boiling points of liquids from observed to normal pressures Proc. Chem. Soc. 1902, 81, 777
47. Hadler, A. B.; Ott, L. S.; Bruno, T. J. Study of azeotropic mixtures with the advanced distillation curve approach Fluid Phase Equilib. 2009, 281, 49-59
48. American Society for Testing and Materials (ASTM). ASTM D2789-04b, Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry; ASTM International: West Conshohocken, PA, 2005.
49. Smith, B. L.; Bruno, T. J. Improvements in the measurement of distillation curves. 3. Application to gasoline and gasoline plus methanol mixtures Ind. Eng. Chem. Res. 2007, 46 (1) 297-309
50. Smith, B. L.; Bruno, T. J. Improvements in the measurement of distillation curves. 4. Application to the aviation turbine fuel Jet-A Ind. Eng. Chem. Res. 2007, 46 (1) 310-320
51. Bruno, T. J.; Smith, B. L. Enthalpy of combustion of fuels as a function of distillate cut: Application of an advanced distillation curve method Energy Fuels 2006, 20 (5) 2109-2116 (Pubitemid 44548809)
52. Rowley, J. R.; Wilding, W. V.; Oscarson, J. L.; Rowley, R. L. DIADEM, DIPPR Information and Data Evaluation Manager, 3.1.0; Brigham Young University: Provo, UT, 2008.
53. Frenkel, M.; Chirico, R. D.; Diky, V.; Muzny, C.; Lemmon, E. W.; Yan, X.; Dong, Q. NIST Standard Reference Database 103a, NIST Thermodata Engine: Version 3.0; Standard Reference Data, National Institute of Standards and Technology (NIST): Gaithersburg, MD, 2008.
54. Span, R.; Wagner, W. Equations of state for technical applications. I. Simultaneously optimized functional forms for nonpolar and polar fluids Int. J. Thermophys. 2003, 24 (1) 1-39
55. Poling, B. E.; Prausnitz, J. M.; O'Connell, J. P. The Properties of Gases and Liquids, 5 th ed.; McGraw-Hill: New York, 2001.
56. Huber, M. L.; Laesecke, A.; Perkins, R. A. Model for the viscosity and thermal conductivity of refrigerants, including a new correlation for the viscosity of R134a Ind. Eng. Chem. Res. 2003, 42 (13) 3163-3178 (Pubitemid 36740501)
57. Lemmon, E. W.; Huber, M. L. Thermodynamic properties of n -dodecane Energy Fuels 2004, 18 (4) 960-967
58. Huber, M. L.; Laesecke, A.; Perkins, R. A. Transport properties of n -dodecane Energy Fuels 2004, 18 (4) 968-975
59. Lemmon, E. W.; Jacobsen, R. T. Equations of state for mixtures of R-32, R-125, R-134a, R-143a, and R-152a J. Phys. Chem. Ref. Data 2004, 33 (2) 593-620 (Pubitemid 38883567)
60. Lemmon, E. W.; McLinden, M. O. Method for estimating mixture equation of state parameters. Proceedings of the Thermophysical Properties and Transfer Processes of New Refrigerants Conference; International Institute of Refrigeration, Commission B1, Paderborn, Germany, 2001; pp 23-30.
61. Kunz, O.; Klimeck, R.; Wagner, W.; Jaeschke, M. The GERG-2004 Wide-Range Reference Equation of State for Natural Gases and Other Mixtures, GERG Technical Monograph; Fortschr.-Ber. VDI, VDI-Verlag: Düsseldorf, Germany, 2007.
62. Lemmon, E. W.; Huber, M. L.; McLinden, M. O. NIST Standard Reference Database 23, NIST Reference Fluid Thermodynamic and Transport Properties Database (REFPROP): Version 8.0; Standard Reference Data, National Institute of Standards and Technology (NIST): Gaithersburg, MD, 2007.
63. Chichester, J.; Huber, M. L. Extended Corresponding States Model for Viscosity and Thermal Conductivity of Pure Fluids and Their Mixtures as Implemented in REFPROP Version 8, NIST IR 6650; National Institute of Standards and Technology (NIST): Boulder, CO, 2008.
64. McLinden, M. O.; Klein, S. A.; Perkins, R. A. An extended corresponding states model for the thermal conductivity of pure refrigerants and refrigerant mixtures Int. J. Refrig. 2000, 23 (1) 43-63 (Pubitemid 30544733)
65. Klein, S. A.; McLinden, M. O.; Laesecke, A. An improved extended corresponding states method for estimation of viscosity of pure refrigerants and mixtures Int. J. Refrig. 1997, 20 (3) 208-217 (Pubitemid 127423946)
66. Huber, M. L.; Ely, J. F. Prediction of the thermal conductivity of refrigerants and refrigerant mixtures Fluid Phase Equilib. 1992, 80, 249-261
67. Huber, M. L.; Ely, J. F. Prediction of the viscosity of refrigerants and refrigerant mixtures Fluid Phase Equilib. 1992, 80, 239-248
68. Smith, B. L.; Bruno, T. J. Composition-explicit distillation curves of aviation fuel JP-8 and a coal-based jet fuel Energy Fuels 2007, 21 (5) 2853-2862 (Pubitemid 47595612)
69. Murphy, M. J.; Taylor, J. D.; McCormick, R. L. Compendium of Experimental Cetane Number Data, NREL/SR-540-36805; National Renewable Energy Laboratory (NREL): Golden, CO, 2004.
70. Heyne, J. S.; Boehman, A. L.; Kirby, S. Autoignition studies of trans-and cis -decalin in an ignition quality tester (IQT) and the development of a high thermal stability unifuel/single battlefield fuel Energy Fuels 2009, 23, 5879-5885
71. Ghosh, P. Predicting the effect of cetane improvers on diesel fuels Energy Fuels 2008, 22, 1073-1079
72. Ghosh, P.; Jaffe, S. B. Detailed composition-based model for predicting the cetane number of diesel fuels Ind. Eng. Chem. Res. 2006, 45, 346-351 (Pubitemid 43075940)
73. Ott, L. S.; Hadler, A. B.; Bruno, T. J. Variability of the rocket propellants RP-1, RP-2, and TS-5: Application of a composition- and enthalpy-explicit distillation curve method Ind. Eng. Chem. Res. 2008, 47 (23) 9225-9233
74. Lovestead, T. M.; Bruno, T. J. Application of the advanced distillation curve method to the aviation fuel avgas 100LL Energy Fuels 2009, 23, 2176-2183