Experimental and numerical study for the shear strengthening of reinforced concrete beams using textile-reinforced mortar

Journal of Composites for Construction

Volumn 16, Issue 1, 2012, Pages 74-90

  Al Salloum, Yousef A ^a   Elsanadedy, Hussein M ^a   Alsayed, Saleh H ^a   Iqbal, Rizwan A ^a  

^a KING SAUD UNIVERSITY   (Saudi Arabia)

Author keywords

Concrete beams; Finite element modeling; Shear strengthening; Textile reinforced mortar

Indexed keywords

BINDING MATERIALS; CONCRETE BEAM; CONTROL BEAMS; EXPERIMENTAL PROGRAM; FE MODEL; FIBER REINFORCED POLYMERS; FIBER ROVINGS; FINITE ELEMENT MODELING; FINITE-ELEMENT; LS-DYNA; NON-LINEAR DYNAMIC ANALYSIS; NUMBER OF LAYERS; NUMERICAL RESULTS; NUMERICAL STUDIES; POLYMERIC ADDITIVES; REINFORCED CONCRETE BEAMS; REINFORCED CONCRETE MEMBER; SHEAR CAPACITY; SHEAR RESISTANCES; SHEAR STRENGTHENING; STRENGTH ENHANCEMENT; STRENGTH PROPERTY; STRENGTHENING MATERIALS; TEXTILE MATERIALS; ULTIMATE LOAD-CARRYING CAPACITY;

BRIDGE DECKS; CONCRETE BEAMS AND GIRDERS; FINITE ELEMENT METHOD; MORTAR; NANOCOMPOSITE FILMS; NANOINDENTATION; POLYMERS; REINFORCED CONCRETE; SHEAR STRENGTH; SOFTWARE TESTING; TEXTILES;

WEAVING;

EID: 84858386121     PISSN: 10900268     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)CC.1943-5614.0000239     Document Type: Article

References (24)

1. American Concrete Institute (ACI). (2008). Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.. ACI 440.2R-08, American Concrete Institute, Farmington Hills, MI
2. ASTM. (1985). Method of test for tensile strength of hydraulic cement mortars.. ASTM C190, American Society for Testing and Materials, West Conshohocken, PA
3. ASTM. (2008). Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens).. ASTM C109/C109M, American Society for Testing and Materials, West Conshohocken, PA, 10.1520/C0109-C0109M-08.
4. ASTM. (2009). Standard test method for pull-off strength of coatings using portable adhesion testers.. ASTM D4541-09e1, American Society for Testing and Materials, West Conshohocken, PA, 10.1520/D4541-09E01.
5. ASTM. (2010). Standard test method for compressive strength of cylindrical concrete specimens.. ASTM C39/C39M, American Society for Testing and Materials, West Conshohocken, PA, 10.1520/C0039-C0039M-10.
6. Belytschko, T. B., and Tsay, C. S. (1981). Explicit algorithms for non-linear dynamics of shells.. J. Appl. Mech. 0021-8936, 48, 209-231. (Pubitemid 12446901)
7. Bruckner, A., Ortlepp, R., and Curbach, M. (2008). Anchoring of shear strengthening for T-beams made of textile reinforced concrete (TRC).. Mater. Struct. 1359-5997, 41 (2), 407-418 10.1617/s11527-007-9254-9. (Pubitemid 351185656)
8. Curbach, M., and Brueckner, A. (2003). Textile strukturen zur querkraftverstaerkung von stahlbetonbauteilen.. Textile Reinforced Structures. Proc., 2nd Colloquium on Textile Reinforced Structures, M. Curbach, ed., Eigenverlag, Dresden, 347-360 (in German).
9. Curbach, M., and Ortlepp, R. (2003). Besonderheiten des verbundverhaltens von verstaerkungsschichten aus textilbewehrtem Beton.. Textile Reinforced Structures. Proc., 2nd Colloquium on Textile Reinforced Structures, M. Curbach, ed., Eigenverlag, Dresden, 361-374 (in German).
10. Di Ludovico, M., Prota, A., and Manfredi, G. (2010). Structural upgrade using basalt fibers for concrete confinement.. J. Compos. Constr. 1090-0268, 14 (5), 541-552. 10.1061/(ASCE)CC.1943-5614.0000114
11. fib bulletin 14. (2001). Externally bonded FRP reinforcement for RC structures.. Technical Rep. prepared by the Working Party EBR of Task Group 9.3, International Federation for Structural Concrete, Lausanne, Switzerland.
12. Garon, R., Balaguru, P. N., and Toutanji, H. (2001). Performance of inorganic polymer-fiber composites for strengthening and rehabilitation of concrete beams.. FRPRCS-5 fiber reinforced plastics for reinforced concrete structures, C. J. Burgoyne, ed., Thomas Telford, London, Vol. 1, 53-62.
13. Kurtz, S., and Balaguru, P. (2001). Comparison of inorganic and organic matrices for strengthening of RC beams with carbon sheets.. J. Struct. Eng. 0733-9445, 127 (1), 35-42. 10.1061/(ASCE)0733-9445(2001)127:1(35) (Pubitemid 32083800)
14. Larbi, A. S., Contamine, R., Ferrier, E., and Hamelin, P. (2010). Shear strengthening of RC beams with textile reinforced concrete (TRC) plate.. Constr. Build. Mater. 0950-0618, 24 (10), 1928-1936. 10.1016/j.conbuildmat.2010.04.008
15. Livermore Software Technology Corporation (LSTC). (2007). LS-DYNA user's keyword manual (nonlinear dynamic analysis of structures in three dimensions) Volume 1.. Version 971. LSTC, Livermore, CA.
16. Murray, Y. D. (2007). Users manual for LS-DYNA concrete material model 159.. Rep. No. FHWA-HRT-05-062, Federal Highway Administration, Washington, DC.
17. Murray, Y. D., Abu-Odeh, A., and Bligh, R. (2007). Evaluation of concrete material model 159.. Rep. No. FHWA-HRT-05-063, Federal Highway Administration, Washington, DC.
18. Papanicolaou, C. G., Triantafillou, T. C., Papathanasiou, M., and Karlos, K. (2008). Textile reinforced mortar (TRM) versus FRP as strengthening material of URM walls: Out-of-plane cyclic loading.. Mater. Struct. 1359-5997, 41 (1), 143-157. 10.1617/s11527-007-9226-0 (Pubitemid 350188771)
19. Toutanji, H., Deng, Y., and Jia, M. (2003). Fatigue performance of RC beams strengthened with CF sheets bonded by inorganic matrix.. FRPRCS-6 fiber reinforced polymer reinforcement for concrete structures, K. H. Tan, ed., World Scientific, Singapore, Vol. 2, 875-884.
20. Triantafillou, T. C., and Papanicolaou, C. G. (2006). Shear strengthening of reinforced concrete members with textile reinforced mortar (TRM) jackets.. Mater. Struct. 1359-5997, 39 (1), 93-103. 10.1007/s11527-005-9034-3 (Pubitemid 43966114)
21. Triantafillou, T. C., Papanicolaou, C. G., Zissimopoulos, P., and Laourdekis, T. (2006). Concrete confinement with textile reinforced mortar (TRM) jackets.. ACI Struct. J. 0889-3241, 103 (1), 28-37. (Pubitemid 43230733)
22. Wiberg, A. (2003). Strengthening of concrete beams using cementitious carbon fibre composites.. Ph.D. thesis, Royal Institute of Technology, Stockholm.
23. Wu, H. C., and Sun, P. (2005). Fiber reinforced cement based composite sheets for structural retrofit.. Proc., Int. Symposium on Bond Behaviour of FRP in Structures (BBFS 2005), International Institute for FRP in Construction, Hong Kong.
24. Wu, H. C., and Teng, J. (2003). Concrete confined with fiber reinforced cement based thin sheet composites.. FRPRCS-6 fiber reinforced polymer reinforcement for concrete structures, K. H. Tan, ed., World Scientific, Singapore, Vol. 1, 591-600.