Partly fluorinated poly(arylene ether ketone sulfone) hydrophilic- hydrophobic multiblock copolymers for fuel cell membranes

International Journal of Hydrogen Energy

Volumn 37, Issue 7, 2012, Pages 6132-6139

  Chen, Yu ^a   Guo, Ruilan ^a   Lee, Chang Hyun ^a   Lee, Myoungbae ^a   McGrath, James E ^a  

^a VIRGINIA POLYTECHNIC INSTITUTE AND STATE UNIVERSITY   (United States)

Author keywords

Annealing; Multiblock copolymer; Partly fluorinated polymer; Proton exchange membrane; Sulfonated poly(arylene ether ketone sulfone)

Indexed keywords

ANNEALING EXPERIMENTS; ARYLENE; BLOCK LENGTHS; COMPARATIVE STUDIES; FILM PROCESSING; FLUORINATED POLYMERS; ION EXCHANGE CAPACITY; MEMBRANE PROPERTIES; MULTIBLOCK COPOLYMER; NANOPHASE SEPARATED MORPHOLOGY; POLY(ARYLENE ETHER KETONE); POLY(ARYLENE ETHER SULFONE); PROTON EXCHANGE MEMBRANE; RANDOM COPOLYMER; SOLUTION CASTING; TELECHELIC OLIGOMERS; TRANSMISSION ELECTRON MICROSCOPY (TEM); WATER UPTAKE;

ANNEALING; FLUORINE CONTAINING POLYMERS; HYDROPHILICITY; HYDROPHOBICITY; ION EXCHANGE MEMBRANES; MORPHOLOGY; OLIGOMERS; PROTON CONDUCTIVITY; TRANSMISSION ELECTRON MICROSCOPY;

COPOLYMERS;

EID: 84858294830     PISSN: 03603199     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijhydene.2011.06.139     Document Type: Conference Paper

References (33)

1. M.S. Whittingham, R.F. Savinell, and T. Zawodzinski Introduction: batteries and fuel cells Chem Rev 104 2004 4243 4244
2. M. Winter, and R.J. Brodd What are batteries, fuel cells, and supercapacitors? Chem Rev 104 2004 4245 4269
3. J.A. Kerres Development of ionomer membranes for fuel cells J Membr Sci 185 2001 3 27
4. M.A. Hickner, H. Ghassemi, Y.S. Kim, B.R. Einsla, and J.E. McGrath Alternative polymer systems for proton exchange membranes (PEMs) Chem Rev 104 2004 4587 4611
5. H.S. Thiam, W.R.W. Daud, S.K. Kamarudin, A.B. Mohammad, A.A.H. Kadhum, and K.S. Loh Overview on nanostructured membrane in fuel cell applications Int J Hydrogen Energy 36 2011 3187 3205
6. T. Higashihara, K. Matsumoto, and M. Ueda Sulfonated aromatic hydrocarbon polymers as proton exchange membranes for fuel cells Polymer 50 2009 5341 5357
7. W.L. Harrison, M.A. Hickner, Y.S. Kim, and J.E. McGrath Poly(arylene ether sulfone) copolymers and related systems from disulfonated monomer building blocks: synthesis, characterization, and performance - a topical review Fuel Cells 5 2005 201 212
8. B. Smitha, S. Sridhar, and A.A. Khan Solid polymer electrolyte membranes for fuel cell applications - a review J Membr Sci 259 2005 10 26
9. K. Nakabayashi, K. Matsumoto, and M. Ueda Synthesis and properties of sulfonated multiblock copoly(ether sulfone)s by a chain extender J Polym Sci Part A-Polym Chem 46 2008 3947 3957
10. K. Nakabayashi, K. Matsumoto, T. Higashihara, and M. Ueda Influence of adjusted hydrophilic-hydrophobic lengths in sulfonated multiblock copoly(ether sulfone) membranes for fuel cell application J Polym Sci Part A-Polym Chem 46 2008 7332 7341
11. H.P. Bi, S.W. Chen, X.B. Chen, K.C. Chen, N. Endo, and M. Higa Poly(sulfonated phenylene)-block-polyimide copolymers for fuel cell applications Macromol Rapid Comm 30 2009 1852 1856
12. Z.X. Hu, Y. Yin, K. Yaguchi, N. Endo, M. Higa, and K.I. Okamoto Synthesis and properties of sulfonated multiblock copolynaphthalimides Polymer 50 2009 2933 2943
13. H. Uehara, M. Kakiage, M. Sekiya, T. Yamagishi, T. Yamanobe, and K. Nakajima Novel design solving the conductivity vs water-uptake trade-off for polymer electrolyte membrane by bicontinuous crystalline/amorphous morphology of block copolymer Macromolecules 42 2009 7627
14. K.A. Sung, W.K. Kim, K.H. Oh, M.J. Choo, K.W. Nam, and J.K. Park Proton exchange membranes based on hydrophilic-hydrophobic multiblock copolymers using different hydrophobic oligomer Int J Hydrogen Energy 36 2011 3956 3964
15. Y.X. Li, F. Wang, J. Yang, D. Liu, A. Roy, and S. Case Synthesis and characterization of controlled molecular weight disulfonated poly(arylene ether sulfone) copolymers and their applications to proton exchange membranes Polymer 47 2006 4210
16. H.S. Lee, A. Roy, O. Lane, S. Dunn, and J.E. McGrath Hydrophilic- hydrophobic multiblock copolymers based on poly(arylene ether sulfone) via low-temperature coupling reactions for proton exchange membrane fuel cells Polymer 49 2008 715 723
17. A.S. Badami, O. Lane, H.S. Lee, A. Roy, and J.E. McGrath Fundamental investigations of the effect of the linkage group on the behavior of hydrophilic-hydrophobic poly(arylene ether sulfone) multiblock copolymers for proton exchange membrane fuel cells J Membr Sci 333 2009 1
18. H. Ghassemi, J.E. McGrath, and T.A. Zawodzinski Multiblock sulfonated-fluorinated poly(arylene ether)s for a proton exchange membrane fuel cell Polymer 47 2006 4132 4139
19. X. Yu, A. Roy, S. Dunn, J. Yang, and J.E. McGrath Synthesis and characterization of sulfonated-fluorinated, hydrophilic-hydrophobic multiblock copolymers for proton exchange membranes Macromol Symp 245 2006 439
20. Y.X. Li, A. Roy, A.S. Badami, M. Hill, J. Yang, and S. Dunn Synthesis and characterization of partially fluorinated hydrophobic-hydrophilic multiblock copolymers containing sulfonate groups for proton exchange membrane J Power Sources 172 2007 30
21. X. Yu, A. Roy, S. Dunn, A.S. Badami, J. Yang, and A.S. Good. Synthesis and characterization of sulfonated-fluorinated, hydrophilic-hydrophobic multiblock copolymers for proton exchange membranes J Polym Sci. Part A-Polym Chem 47 2009 1038
22. H.S. Lee, A. Roy, O. Lane, M. Lee, and J.E. McGrath Synthesis and characterization of multiblock copolymers based on hydrophilic disulfonated poly(arylene ether sulfone) and hydrophobic partially fluorinated poly(arylene ether ketone) for fuel cell applications J Polym Sci Part A-Polym Chem 48 2010 214
23. H.S. Lee, A.S. Badami, A. Roy, and J.E. McGrath Segmented sulfonated poly(arylene ether sulfone)-b-polyimide copolymers for proton exchange membrane fuel cells. i. copolymer synthesis and fundamental properties JPolym Sci Part A-Polym Chem 45 2007 4879
24. H.S. Lee, A. Roy, A.S. Badami, and J.E. McGrath Synthesis and characterization of sulfonated poly(arylene ether) polyimide multiblock copolymers for proton exchange membranes Macromol Res 15 2007 160 166
25. A.S. Badami, A. Roy, H.S. Lee, Y.X. Li, and J.E. McGrath Morphological investigations of disulfonated poly(arylene ether sulfone)-b-naphthalene dianhydride-based polyimide multiblock copolymers as potential high temperature proton exchange membranes J Membr Sci 328 2009 156 164
26. H. Ghassemi, G. Ndip, and J.E. McGrath New multiblock copolymers of sulfonated poly(4'-phenyl-2,5-benzophenone) and poly(arylene ether sulfone) for proton exchange membranes Polym 45 2004 5855 5862
27. H. Wang, A.S. Badami, A. Roy, and J.E. McGrath Multiblock copolymers of poly(2,5-benzophenone) and disulfonated poly(arylene ether sulfone) for proton-exchange membranes. I. Synthesis and characterization J Polym Sci Part A-Polym Chem 45 2007 284
28. H.S. Lee, A. Roy, O. Lane, and J.E. McGrath Synthesis and characterization of poly(arylene ether sulfone)-b-polybenzimidazole copolymers for high temperature low humidity proton exchange membrane fuel cells Polymer 49 2008 5387 5396
29. R. Guo, O. Lane, D. VanHouten, and J.E. McGrath Synthesis and characterization of phenolphthalein-based poly(arylene ether sulfone) hydrophilic-hydrophobic multiblock copolymers for proton exchange membranes Ind Eng Chem Res 49 2010 12125 12134
30. Y.X. Li, R.A. VanHouten, A.E. Brink, and J.E. McGrath Purity characterization of 3,3′-disulfonated-4,4′-dichlorodiphenyl sulfone (SDCDPS) monomer by UV-vis spectroscopy Polymer 49 2008 3014 3019
31. Y.S. Kim, F. Wang, M. Hickner, S. McCartney, Y.T. Hong, and W. Harrison Effect of acidification treatment and morphological stability of sulfonated poly(arylene ether sulfone) copolymer proton-exchange membranes for fuel-cell use above 100 degrees C J Polym Sci Part B-Polym Phys 41 2003 2816 2828
32. J. Yang, Y.X. Li, A. Roy, and J.E. McGrath Viscometric behavior of disulfonated poly(arylene ether sulfone) random copolymers used as proton exchange membranes Polymer 49 2008 5300 5306
33. C.H. Lee, H.B. Park, Y.M. Lee, and R.D. Lee Importance of proton conductivity measurement in polymer electrolyte membrane for fuel cell application Ind Eng Chem Res 44 2005 7617 7626