Analytical modeling of the open-circuit magnetic field in axial flux permanent-magnet machines with semi-closed slots

IEEE Transactions on Magnetics

Volumn 48, Issue 3, 2012, Pages 1212-1226

  Tiegna, Huguette ^a   Bellara, Adel ^a   Amara, Yacine ^a   Barakat, Georges ^a  

^a UNIVERSITY OF LE HAVRE   (France)

Author keywords

Analytical solution; axial flux machines; cogging torque; electromotive force (EMF); magnetic field; permanent magnet machines; semi closed slots; slotting effect

Indexed keywords

ANALYTICAL SOLUTIONS; AXIAL FLUX MACHINES; COGGING TORQUE; PERMANENT MAGNET MACHINES; SEMI-CLOSED SLOTS; SLOTTING EFFECT;

ANALYTICAL MODELS; COMPUTER SIMULATION; ELECTROMOTIVE FORCE; MAXWELL EQUATIONS; MODELS; PERMANENT MAGNETS; SYNCHRONOUS MACHINERY; TORQUE;

MAGNETIC FIELDS;

EID: 84858145259     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2011.2171979     Document Type: Article

References (23)

1. J. Wang, G. W. Jewell, and D. Howe, "Design optimisation and comparison of tubular permanent magnet machine topologies," IEE Proc. -Elect. Power Appl., vol. 148, no. 5, pp. 456-463, 2001.
2. B. L. J. Gysen, J. L. G. Jansen, J. J. H. Paulides, and E. A. Lomonova, "Design aspects of an active electromagnetic suspension system for automotive applications," IEEE Trans. Magn., vol. 45, no. 5, pp. 1589-1597, Sep./Oct. 2009.
3. T. Lubin, S. Mezani, and A. R. Rezzoug, "2-D analytical model for surface- mounted permanent-magnet motors with semi-closed slots," IEEE Trans. Magn., vol. 47, no. 2, pp. 479-492, Feb. 2011.
4. L. J. Wu, Z. Q. Zhu, D. Staton, M. Popescu, and D. Hawkins, "Subdomain model for predicting armature reaction field of surface-mounted permanent-magnet machines accounting for tooth-tips," IEEE Trans. Magn., vol. 47, no. 4, pp. 812-822, Apr. 2011.
5. G. Barakat and Y. Amara, "Analytical modeling of flat and tubular linear PM machines with surface-mounted magnets and semi-closed slots," presented at the Int. Symp. Linear Drives for Industry Applications (LDIA2011), Eidhoven, The Netherlands, July 3-6, 2011.
6. A. Bellara, Y. Amara, G. Barakat, and P. Reghem, "Analytical modeling of the magnetic field in axial flux permanent magnet machines with semi-closed slots at no load," in Proc. XIX Int. Conf. Electrical Machines (ICEM2010), Rome, Italy, Sep. 6-8, 2010, pp. 1-6.
7. Y. N. Zhilichev, "Three-dimensional analytic model of permanent magnet axial flux machine," IEEE Trans. Magn., vol. 34, no. 6, pp. 3897-3901, Nov. 1998.
8. E. P. Furlani and M. A. Knewtson, "A three-dimensional field solution for permanent magnet axial-field motors," IEEE Trans Magn., vol. 33, no. 3, pp. 2322-2325, May 1997.
9. J. Azzouzi, G. Barakat, and B. Dakyo, "Quasi-3-D analytical modeling of magnetic field of an axial flux permanent-magnet synchronous machine," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 746-752, Dec. 2005.
10. A. Parviainen, M. Niemelä, and J. Pyrhönen, "Modeling of axial flux permanent-magnet machines," IEEE Trans. Ind. Appl., vol. 40, no. 5, pp. 1333-1340, Sep./Oct. 2004.
11. G. Cvetkovski, L. Petkovska, M. Cundev, and S. Gair, "Quasi 3D FEM in function of an optimization analysis of a PM disk motor," in Proc. Int. Conf. Electrical Machines, Helsinki, Finland, Aug. 2000, vol. IV, pp. 1871-1875.
12. H. Tiegna, Y. Amara, and G. Barakat, "Multislice analytical model of axial flux PM machines," presented at the COMPUMAG2011, Sidney, Australia, Jul. 12-15, 2011.
13. Z. Q. Zhu, S. Ruangsinchaiwanich, D. Ishak, and D. Howe, "Analysis of cogging torque in brushless machines having nonuniformly distributed stator slots and stepped rotor magnets," IEEE Trans. Magn., vol. 41, no. 10, pp. 3910-3912, Oct. 2005.
14. G. Barakat, T. El Meslouhi, and B. Dakyo, "Analysis of the cogging torque behaviour of a two-phase axial flux permanent magnet synchronous machine," IEEE Trans. Magn., vol. 37, no. 4, pp. 2803-2805, Jul. 2001.
15. J. Wang, K. Atallah, Z. Q. Zhu, and D. Howe, "Modular three-phase permanent-magnet brushless machines for in-wheel applications," IEEE Trans. Veh. Technol., vol. 57, no. 5, pp. 2714-2720, Jun. 2002.
16. Y. Amara, G. Barakat, and P. Reghem, "Analytical prediction of eddycurrent loss in armature windings of permanent magnet brushless AC machines," IEEE Trans. Magn., vol. 46, no. 8, pp. 3481-3484, Aug. 2010.
17. Y. Amara, J.Wang, and D. Howe, "Analytic prediction of eddy-current loss in modular tubular permanent-magnet machines," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 761-770, Dec. 2005.
18. N. Abdel Karim, J. Azzouzi, and G. Barakat, "Winding functions theory and Maxwell's equations coupled analytical modeling of an axial flux PM synchronous machine," Int. Rev. Elect. Eng. (IREE), vol. 1, no. 1, pp. 27-35, Jan./Feb. 2006.
19. J. Wang, G. Jewell, and D. Howe, "A general framework for the analysis and design of tubular linear permanent magnet machines," IEEE Trans. Magn., vol. 35, no. 3, pp. 1986-2000, May 1999.
20. B. L. J. Gysen, K. J. Meessen, J. J. H. Paulides, and E. A. Lomonova, "General formulation of the electromagnetic field distribution in machines and devices using Fourier analysis," IEEE Trans. Magn., vol. 46, no. 1, pp. 39-52, Jan. 2010.
21. S. W. Lee, W. R. Jones, and J. J. Campbell, "Convergence of numerical solutions of iris-type discontinuity problems," IEEE Trans. Microw. Theory Tech., vol. 19, no. 6, pp. 528-536, Jun. 1971.
22. O. de la Barrière, S. Hlioui, H. Ben Ahmed, M. Gabsi, and M. LoBue, "Three-dimensional analytical modeling of a permanent-magnet linear actuator with circular magnets," IEEE Trans. Magn., vol. 46, no. 9, pp. 3608-3616, Sep. 2010.
23. M. Mirzaei, M. Mirsalim, and S. E. Abdollahi, "Analytical modeling of axial air gap solid rotor induction machines using a quasi-three-dimensional method," IEEE Trans. Magn., vol. 43, no. 7, pp. 3237-3242, Jul. 2007.