Current-mode control of a coupled-inductor buck-boost dc-dc switching converter

IEEE Transactions on Power Electronics

Volumn 27, Issue 5, 2012, Pages 2536-2549

  Restrepo, Carlos ^a   Calvente, Javier ^a   Romero, Alfonso ^a   Vidal Idiarte, Enric ^a   Giral, Roberto ^a  

^a UNIVERSITAT ROVIRA I VIRGILI   (Spain)

Author keywords

Average current mode control (ACC); coupled inductors; high efficiency; input and output current control; noninverting buck boost converter; wide bandwidth

Indexed keywords

AVERAGE CURRENT-MODE CONTROL; BUCK BOOST CONVERTER; BUCK-BOOST; COUPLED INDUCTOR; CURRENT MODE; CURRENT MODE CONTROL; CURRENT TRANSFER FUNCTIONS; DC-DC SWITCHING CONVERTERS; FREQUENCY RESPONSE MEASUREMENT; INPUT VOLTAGES; MAXIMUM VALUES; OPEN LOOPS; OPERATING POINTS; OUTPUT VOLTAGES; WIDE-BANDWIDTH;

BANDWIDTH; DC-DC CONVERTERS; FREQUENCY RESPONSE;

ELECTRIC CONVERTERS;

EID: 84858019129     PISSN: 08858993     EISSN: None     Source Type: Journal    
DOI: 10.1109/TPEL.2011.2172226     Document Type: Article

References (45)

1. M. Sokolov andD. Shmilovitz, "A modifiedMPPT scheme for accelerated convergence," IEEE Trans. Energy Convers., vol. 23, no. 4, pp. 1105-1107, Dec. 2008.
2. J. Agorreta, L. Reinaldos, R. Gonzalez, M. Borrega, J. Balda, and L. Marroyo, "Fuzzy switching technique applied to PWM boost converter operating in mixed conduction mode for PV systems," IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4363-4373, Nov. 2009.
3. O. Mourra, A. Fernandez, and F. Tonicello, "Buck boost regulator (B2R) for spacecraft solar array power conversion," in Proc. IEEE 25th Appl. Power Electron. Conf. Expo., Feb., 2010, pp. 1313-1319.
4. I. T. Papaioannou, M. C. Alexiadis, C. S. Demoulias, D. P. Labridis, and P. S. Dokopoulos, "Modeling and field measurements of photovoltaic units connected to LVgrid: Study of penetration scenarios," IEEE Trans. Power Del., vol. 26, no. 2, pp. 979-987, Apr. 2011.
5. C. Ramos-Paja, C. Bordons, A. Romero, R. Giral, and L. Martinez-Salamero, "Minimum fuel consumption strategy for PEM fuel cells," IEEE Trans. Ind. Electron., vol. 56, no. 3, pp. 685-696, Mar. 2009.
6. A. Shahin, M. Hinaje, J.-P. Martin, S. Pierfederici, S. Rael, and B. Davat, "High voltage ratio DC-DC converter for fuel-cell applications," IEEE Trans. Ind. Electron., vol. 57, no. 12, pp. 3944-3955, Dec. 2010.
7. P. Thounthong, S. Pierfederici, J.-P. Martin, M. Hinaje, and B. Davat, "Modeling and control of fuel cell/supercapacitor hybrid source based on differential flatness control," IEEE Trans. Veh. Technol., vol. 59, no. 6, pp. 2700-2710, Jul. 2010.
8. F. Segura, J. Andujar, and E. Duran, "Analog current control techniques for power control in PEM fuel-cell hybrid systems: A critical review and a practical application," IEEE Trans. Ind. Electron., vol. 58, no. 4, pp. 1171-1184, Apr. 2011.
9. D. Sha, Z. Guo, and X. Liao, "Cross-feedback output-current-sharing control for input-series-output-parallel modular DC-DC converters," IEEE Trans. Power Electron., vol. 25, no. 11, pp. 2762-2771, Nov. 2010.
10. D. Lamar, J. Zuniga, A. Alonso, M. Gonzalez, and M. Alvarez, "A very simple control strategy for power factor correctors driving high-brightness LEDs," IEEE Trans. Power Electron., vol. 24, no. 8, pp. 2032-2042, Aug. 2009.
11. W.-K. Lun, K. Loo, S.-C. Tan, Y. Lai, and C. Tse, "Bilevel current driving technique for LEDs," IEEE Trans. Power Electron., vol. 24, no. 12, pp. 2920-2932, Dec. 2009.
12. C. Ramos-Paja, A. Romero, R. Giral, J. Calvente, and L. Martinez-Salamero, "Mathematical analysis of hybrid topologies efficiency for PEM fuel cell power systems design," Int. J. Electr. Power Energy Syst., vol. 32, no. 9, pp. 1049-1061, 2010.
13. J. Calvente, L. Martinez-Salamero, P. Garces, R. Leyva, and A. Capel, "Dynamic optimization of bidirectional topologies for battery charge/discharge in satellites," in Proc. IEEE 32nd Annu. Power Electron. Spec. Conf., 2001, vol. 4, pp. 1994-1999. (Pubitemid 32950516)
14. X. Yu, M. Starke, L. Tolbert, and B. Ozpineci, "Fuel cell power conditioning for electric power applications: A summary," IET Electr. Power Appl., vol. 1, no. 5, pp. 643-656, 2007. (Pubitemid 47283385)
15. R. W. Erickson and D. Maksimovic, Fundamentals of Power Electronics, 2nd ed. Norwell, MA: Kluwer, 2001.
16. D. Biel, F. Guinjoan, E. Fossas, and J. Chavarria, "Sliding-mode control design of a boost-buck switching converter for AC signal generation," IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 51, no. 8, pp. 1539-1551, Aug. 2004.
17. M. Gaboriault and A. Notman, "A high efficiency, noninverting, buckboost DC-DC converter," in Proc. IEEE 19th Appl. Power Electron. Conf. Expo., 2004, vol. 3, pp. 1411-1415.
18. T. Crocker and N. Cooper, "Fast and furious [electric dreams]," Power Eng., vol. 18, no. 4, pp. 39-41, Aug. 2004.
19. B. Sahu and G. Rincon-Mora, "A low voltage, dynamic, noninverting, synchronous buck-boost converter for portable applications," IEEE Trans. Power Electron., vol. 19, no. 2, pp. 443-452, Mar. 2004.
20. Y.-J. Lee, A. Khaligh, A. Chakraborty, and A. Emadi, "Digital combination of buck and boost converters to control a positive buck-boost converter and improve the output transients," IEEE Trans. Power Electron., vol. 24, no. 5, pp. 1267-1279, May 2009.
21. S. Waffler and J. Kolar, "A novel low-loss modulation strategy for highpower bidirectional buck + boost converters," IEEE Trans. Power Electron., vol. 24, no. 6, pp. 1589-1599, Jun. 2009.
22. X. Ren, X. Ruan, H. Qian, M. Li, and Q. Chen, "Three-mode dualfrequency two-edge modulation scheme for four-switch buck-boost converter," IEEE Trans. Power Electron., vol. 24, no. 2, pp. 499-509, Feb. 2009.
23. P.-C. Huang, W.-Q. Wu, H.-H. Ho, and K.-H. Chen, "Hybrid buck-boost feedforward and reduced average inductor current techniques in fast line transient and high-efficiency buck-boost converter," IEEE Trans. Power Electron., vol. 25, no. 3, pp. 719-730, Mar. 2010.
24. Y.-J. Lee, A. Khaligh, and A. Emadi, "A compensation technique for smooth transitions in a noninverting buck-boost converter," IEEE Trans. Power Electron., vol. 24, no. 4, pp. 1002-1015, Apr. 2009.
25. J. Chen, D. Maksimovic, and R. Erickson, "Analysis and design of a low-stress buck-boost converter in universal-input PFC applications," IEEE Trans. Power Electron., vol. 21, no. 2, pp. 320-329, Mar. 2006. (Pubitemid 43380080)
26. E. Schaltz, P. Rasmussen, and A. Khaligh, "Non-inverting buck-boost converter for fuel cell applications," in Proc. IEEE 34th Annu. Conf. Ind. Electron. Soc., Nov. 2008, pp. 855-860.
27. J.-K. Shiau, C.-J. Cheng, and C.-E. Tseng, "Stability analysis of a noninverting synchronous buck-boost power converter for a solar power management system," in Proc. IEEE 1st Int. Conf. Sustainable Energy Technol., Nov. 2008, pp. 263-268.
28. J. Calvente, L. Martinez-Salamero, H. Valderrama, and E. Vidal-Idiarte, "Using magnetic coupling to eliminate right half-plane zeros in boost converters," IEEE Power Electron Lett., vol. 2, no. 2, pp. 58-62, Jun. 2004.
29. J. Calvente, L. Martinez-Salamero, P. Garces, and A. Romero, "Zero dynamics-based design of damping networks for switching converters," IEEE Trans. Aerosp. Electron. Syst., vol. 39, no. 4, pp. 1292-1303, Oct. 2003.
30. R. Erickson, "Optimal single resistors damping of input filters," in Proc. IEEE 14th Appl. Power Electron. Conf. Expo., Mar. 1999, vol. 2, pp. 1073-1079.
31. C. Restrepo, J. Calvente, A. Cid, A. El Aroudi, and R. Giral, "A noninverting buck-boost DC-DC switching converter with high efficiency and wide bandwidth," IEEE Trans. Power Electron., vol. 26, no. 9, pp. 2490-2503, Sep. 2011.
32. R. Middlebrook and S. Cúk, "A general unified approach to modeling switching-converter power stages," in Proc. Rec. IEEE Power Electron. Spec. Conf., Jun. 1976, pp. 18-34.
33. J. Chen, D. Maksimovic, and R. Erickson, "Buck-boost PWM converters having two independently controlled switches," in Proc. IEEE 32nd Annu. Power Electron. Spec. Conf., 2001, vol. 2, pp. 736-741. (Pubitemid 32950317)
34. L. Dixon, "Average current mode control of switching power supplies," in Proc. Unitrode Power Supply Design Sem., Unitrode Corp., 1988, pp. 5.1-5.14.
35. D. O'Sullivan, H. Spruyt, and A. Crausaz,"PWMconductance control," in Proc. IEEE 19th Annu. Power Electron. Spec. Conf., PESC, 1988, vol. 1, pp. 351-359.
36. Y.-S. Jung, J.-Y. Lee, and M.-J. Youn, "A new small signal modeling of average current mode control," in Proc. IEEE 29th Annu. Power Electron. Specialists Conf., May 1998, vol. 2, pp. 1118-1124.
37. W. Tang, F. Lee, and R. Ridley, "Small-signalmodeling of average currentmode control," vol. 8, no. 2, pp. 112-119, Apr. 1993.
38. J. B. Ejea, A. Ferreres, E. Sanchis-Kilders, E. Maset, V. Esteve, J. Jordan, andA.Garrigos, "Optimized topology for high efficiency battery discharge regulator," IEEE Trans. Aerosp. Electron. Syst., vol. 44, no. 4, pp. 1511-1521, Oct. 2008.
39. P. Villegas, J. Sebastian,M. Hernando, F. Nuno, and J.Martinez, "Average current mode control of series-switching post-regulators used in power factor correctors," IEEE Trans. Power Electron., vol. 15, no. 5, pp. 813-819, Sep. 2000.
40. P. Cooke, "Modeling average current mode control [of power convertors]," in Proc. IEEE 15th Appl. Power Electron. Conf. Expo., 2000, pp. 256-262. (Pubitemid 30584396)
41. J. Sun and R. Bass, "Modeling and practical design issues for average current control," in Proc. IEEE 14th Appl. Power Electron. Conf. Expo., Mar. 1999, vol. 2, pp. 980-986.
42. "Designing with the TL5001PWMcontroller," Texas Instruments, Dallas, Aplicat. Rep. SLVA034A, 1995.
43. R. Paul and D. Maksimovic, "Analysis of PWM nonlinearity in noninverting buck-boost power converters," in Proc. IEEE 39th Annu. Power Electron. Spec. Conf., Jun. 2008, pp. 3741-3747.
44. J. Park, J. Fan, X.Wang, and A. Huang, "A sample-data model for double edge current programmed mode control (DECPM) in high-frequency and wide-range DC-DC converters," IEEE Trans. Power Electron., vol. 25, no. 4, pp. 1023-1033, Apr. 2010.
45. D. Dening, "A buck-or-boost converter module with embedded inductor and fast current limit," IEEE Trans. Power Electron., vol. 26, no. 12, pp. 3874-3883, Dec. 2011.