Characteristics and cytocompatibility of biodegradable polymer film on magnesium by spin coating

Colloids and Surfaces B: Biointerfaces

Volumn 93, Issue , 2012, Pages 67-74

  Xu, Liping ^a   Yamamoto, Akiko ^a  

^a NATIONAL INSTITUTE FOR MATERIALS SCIENCE   (Japan)

Author keywords

Biodegradable; Corrosion; Cytocompatibility; Magnesium; Polymer coating; Surface modification

Indexed keywords

BIODEGRADABLE; BONE IMPLANT; CARDIOVASCULAR STENTS; CYTOCOMPATIBILITY; DEGRADATION PROCESS; HIGH GROWTH; HIGH MOLECULAR WEIGHT; IMMERSION MEDIUM; LOW MOLECULAR WEIGHT; MAGNESIUM AND ITS ALLOYS; METALLIC MATERIAL; PH MEASUREMENTS; PLLA; POLYMER COATING; RAPID CORROSION; SAOS-2 CELLS; SEMICRYSTALLINES;

AMORPHOUS FILMS; BOND STRENGTH (MATERIALS); CELL CULTURE; CORROSION; CORROSION RESISTANCE; MAGNESIUM; MOLECULAR WEIGHT; PROTECTIVE COATINGS; SURFACE TREATMENT;

POLYMER FILMS;

MAGNESIUM; POLYCAPROLACTONE; POLYLACTIC ACID; POLYMER;

ADHESION; ARTICLE; BIOCOMPATIBILITY; BIOFILM; CELL ADHESION; CELL PROLIFERATION; CELL STRUCTURE; CHEMICAL ANALYSIS; CHEMICAL STRUCTURE; CONTROLLED STUDY; CORROSION; CYTOCOMPATIBILITY; HUMAN; HUMAN CELL; IMMERSION; INCUBATION TIME; MATERIAL COATING; MOLECULAR WEIGHT; PH MEASUREMENT; PRIORITY JOURNAL; STRENGTH; STRUCTURE ANALYSIS;

ABSORBABLE IMPLANTS; ALLOYS; CELL LINE; COATED MATERIALS, BIOCOMPATIBLE; CORROSION; HUMANS; HYDROGEN-ION CONCENTRATION; LACTIC ACID; MAGNESIUM; MICROSCOPY, ELECTRON, SCANNING; MOLECULAR WEIGHT; OSTEOBLASTS; POLYESTERS; POLYMERS; SURFACE PROPERTIES;

EID: 84857783896     PISSN: 09277765     EISSN: 18734367     Source Type: Journal    
DOI: 10.1016/j.colsurfb.2011.12.009     Document Type: Article

References (52)

1. Maguire M., Cowan J. Magnesium chemistry and biochemistry. Biometals 2002, 15:203-210.
2. Staiger M., Pietak A., Huadmai J., Dias G. Magnesium and its alloys as orthopedic biomaterials: a review. Biomaterials 2006, 27:1728-1734.
3. Witte F., Kaese V., Haferkamp H., Switzer E., Meyer-Lindenberg A., Wirth C., et al. In vivo corrosion of four magnesium alloys and the associated bone response. Biomaterials 2005, 26:3557-3563.
4. Xu L., Yu G., Zhang E., Pan F., Yang K. In vivo corrosion behavior of Mg-Mn-Zn alloy for bone implant application. Journal of Biomedical Materials Research Part A 2007, 83:703-711.
5. Xu L., Zhang E., Yin D., Zeng S., Yang K. In vitro corrosion behaviour of Mg alloys in a phosphate buffered solution for bone implant application. Journal of Materials Science: Materials in Medicine 2008, 19:1017-1025.
6. Song G. Control of biodegradation of biocompatable magnesium alloys. Corrosion Science 2007, 49:1696-1701.
7. Yin D., Zhang E., Zeng S. Effect of Zn on mechanical property and corrosion property of extruded Mg-Zn-Mn alloy. Transactions of Nonferrous Metals Society of China 2008, 18:763-768.
8. Zhang E., Yin D., Xu L., Yang L., Yang K. Microstructure, mechanical and corrosion properties and biocompatibility of Mg-Zn-Mn alloys for biomedical application. Materials Science and Engineering: C 2009, 29:987-993.
9. Di Mario C., Griffiths H., Goktekin O., Peeters N., Verbist J., Bosiers M., et al. Drug-eluting bioabsorbable magnesium stent. Journal of Interventional Cardiology 2004, 17:391-395.
10. Waksman R., Pakala R., Kuchulakanti P., Baffour R., Hellinga D., Seabron R., et al. Safety and efficacy of bioabsorbable magnesium alloy stents in porcine coronary arteries. Catheterization and Cardiovascular Interventions 2006, 68:607-617.
11. Witte F., Fischer J., Nellesen J., Crostack H., Kaese V., Pisch A., et al. In vitro and in vivo corrosion measurements of magnesium alloys. Biomaterials 2006, 27:1013-1018.
12. Zartner P., Cesnjevar R., Singer H., Weyand M. First successful implantation of a biodegradable metal stent into the left pulmonary artery of a preterm baby. Catheterization and Cardiovascular Interventions 2005, 66:590-594.
13. Kim W., Kim J., Lee J., Seok H. Influence of Ca on the corrosion properties of magnesium for biomaterials. Materials Letters 2008, 62:4146-4148.
14. Li Z., Gu X., Lou S., Zheng Y. The development of binary Mg-Ca alloys for use as biodegradable materials within bone. Biomaterials 2008, 29:1329-1344.
15. Zhang S., Li J., Song Y., Zhao C., Zhang X., Xie C., et al. In vitro degradation, hemolysis and MC3T3-E1 cell adhesion of biodegradable Mg-Zn alloy. Materials Science and Engineering: C 2009, 29:1907-1912.
16. Zhang S., Zhang X., Zhao C., Li J., Song Y., Xie C., et al. Research on an Mg-Zn alloy as a degradable biomaterial. Acta Biomaterialia 2010, 6:626-640.
17. Zhang E., Yang L., Xu J., Chen H. Microstructure, mechanical properties and bio-corrosion properties of Mg-Si (-Ca, Zn) alloy for biomedical application. Acta Biomaterialia 2010, 6:1756-1762.
18. Heublein B., Rohde R., Kaese V., Niemeyer M., Hartung W., Haverich A. Biocorrosion of magnesium alloys: a new principle in cardiovascular implant technology?. British Medical Journal 2003, 89:651.
19. Muller W., Nascimento M., Zeddies M., Corsico M., Gassa L., Mele M. Magnesium and its alloys as degradable biomaterials: corrosion studies using potentiodynamic and EIS electrochemical techniques. Materials Research 2007, 10:5-10.
20. Pietak A., Mahoney P., Dias G., Staiger M. Bone-like matrix formation on magnesium and magnesium alloys. Journal of Materials Science: Materials in Medicine 2008, 19:407-415.
21. Erbel R., Di Mario C., Bartunek J., Bonnier J., de Bruyne B., Eberli F., et al. Temporary scaffolding of coronary arteries with bioabsorbable magnesium stents: a prospective, non-randomised multicentre trial. The Lancet 2007, 369:1869-1875.
22. Chen J., Zeng R.C., Huang W.J., Zheng Z.Q., Wang Z.L., Wang J. Characterization and wear resistance of macro-arc oxidation coating on magnesium alloy AZ91 in simulated body fluids. Transactions of Nonferrous Metals Society of China 2008, 18:s361-s364.
23. Hiromoto S., Shishido T., Yamamoto A., Maruyama N., Somekawa H., Mukai T. Precipitation control of calcium phosphate on pure magnesium by anodization. Corrosion Science 2008, 50:2906-2913.
24. Song Y., Zhang S., Li J., Zhao C., Zhang X. Electrodeposition of Ca-P coatings on biodegradable Mg alloy: in vitro biomineralization behavior. Acta Biomaterialia 2010, 6:1736-1742.
25. Xu L., Pan F., Yu G., Yang L., Zhang E., Yang K. In vitro and in vivo evaluation of the surface bioactivity of a calcium phosphate coated magnesium alloy. Biomaterials 2009, 30:1512-1523.
26. Xu L., Zhang E., Yang K. Phosphating treatment and corrosion properties of Mg-Mn-Zn alloy for biomedical application. Journal of Materials Science: Materials in Medicine 2009, 20:859-867.
27. Drynda A., Hassel T., Hoehn R., Perz A., Bach F., Peuster M. Development and biocompatibility of a novel corrodible fluoride-coated magnesium-calcium alloy with improved degradation kinetics and adequate mechanical properties for cardiovascular applications. Journal of Biomedical Materials Research Part A 2010, 93:763-775.
28. Yan T., Tan L., Xiong D., Liu X., Zhang B., Yang K. Fluoride treatment and in vitro corrosion behavior of an AZ31B magnesium alloy. Materials Science and Engineering: C 2010, 30:740-748.
29. Mano J., Sousa R., Boesel L., Neves N., Reis R. Bioinert, biodegradable and injectable polymeric matrix composites for hard tissue replacement: state of the art and recent developments. Composites Science and Technology 2004, 64:789-817.
30. O'Brien B., Carroll W. The evolution of cardiovascular stent materials and surfaces in response to clinical drivers: a review. Acta Biomaterialia 2009, 5:945-958.
31. Ramcharitar S., Serruys P. Fully biodegradable coronary stents: progress to date. American Journal of Cardiovascular Drugs 2008, 8:305-314.
32. Gray J., Luan B. Protective coatings on magnesium and its alloys-a critical review. Journal of Alloys and Compounds 2002, 336:88-113.
33. Gu X., Zheng Y., Lan Q., Cheng Y., Zhang Z., Xi T., et al. Surface modification of an Mg-1Ca alloy to slow down its biocorrosion by chitosan. Biomedical Materials 2009, 4:044109.
34. Gray-Munro J.E., Seguin C., Strong M. Influence of surface modification on the in vitro corrosion rate of magnesium alloy AZ31. Journal of Biomedical Materials Research Part A 2009, 91:221-230.
35. Wong H.M., Yeung K.W.K., Lam K.O., Tam V., Chu P.K., Luk K.D.K., et al. A biodegradable polymer-based coating to control the performance of magnesium alloy orthopaedic implants. Biomaterials 2010, 31:2084-2096.
36. Burke M., Clarke B., Rochev Y., Gorelov A., Carroll W. Estimation of the strength of adhesion between a thermoresponsive polymer coating and nitinol wire. Journal of Materials Science: Materials in Medicine 2008, 19:1971-1979.
37. Li M., Palacio M., Barry Carter C., Gerberich W. Indentation deformation and fracture of thin polystyrene films. Thin Solid Films 2002, 416:174-183.
38. Huang J., Ren Y., Zhang B., Yang K. Preparation and property of coating on degradable Mg implant. The Chinese Journal of Nonferrous Metals 2007, 17:1465-1469.
39. L. Xu, A. Yamamoto, In vitro degradation of biodegradable polymer-coated magnesium under cell culture condition, Surface and Coating Technology, submitted for publication.
40. Kontturi E., Johansson L., Kontturi K., Ahonen P., Thune P., Laine J. Cellulose nanocrystal submonolayers by spin coating. Langmuir 2007, 23:9674-9680.
41. Kumari T., Vasudev U., Kumar A., Menon B. Cell surface interactions in the study of biocompatibility. Trends in Biomaterials and Artificial Organs 2002, 15:37-41.
42. Yamamoto A., Hiromoto S. Effect of inorganic salts, amino acids and proteins on the degradation of pure magnesium in vitro. Materials Science and Engineering: C 2009, 29:1559-1568.
43. Altun H., Sen S. Studies on the influence of chloride ion concentration and pH on the corrosion and electrochemical behaviour of AZ63 magnesium alloy. Materials & Design 2004, 25:637-643.
44. Baldwin K., Bray D., Howard G., Gardiner R. Corrosion behaviour of some vapour deposited magnesium alloys. Materials Science and Technology 1996, 12:929-944.
45. Makar G., Kruger J. Corrosion of magnesium. International Materials Reviews 1993, 38:138-153.
46. Ahn S., Lee J., Kim J., Han J. Localized corrosion mechanisms of the multilayered coatings related to growth defects. Surface and Coatings Technology 2004, 177:638-644.
47. Chen J., Yu G., Huang J. Corrosion behavior and adhesion of ion-plated TiN films on AISI 304 steel. Materials Chemistry and Physics 2000, 65:310-315.
48. Tuba F., Borbas L., Nagy P., Olah L. Hydrolysis induced deterioration of compressive properties of poly-e{open}-caprolactone. FME Transactions 2009, 37:33-37.
49. Zhou Z., Yi Q., Liu X., Liu L., Liu Q. In vitro degradation behaviors of poly-l-lactide/bioactive glass composite materials in phosphate-buffered solution. Polymer Bulletin 2009, 63:575-586.
50. Scharnagl N., Blawert C., Dietzel W. Corrosion protection of magnesium alloy AZ31 by coating with poly (ether imides) (PEI). Surface and Coatings Technology 2009, 203:1423-1428.
51. 1-x coatings deposited on biomedical 316L stainless steel by radio-frequency magnetron sputtering. Applied Surface Science 2010, 257:696-703.
52. 2+ concentration on biocompatibility of pure magnesium. Frontiers of Materials Science in China 2010, 4:126-131.