Torque control strategy of polyphase permanent-magnet synchronous machines with minimal controller reconfiguration under open-circuit fault of one phase

IEEE Transactions on Industrial Electronics

Volumn 59, Issue 6, 2012, Pages 2632-2644

  Baudart, François ^a   Dehez, Bruno ^a   Matagne, Ernest ^a   Telteu Nedelcu, Dan ^b   Alexandre, Paul ^b   Labrique, Francis ^a  

^a UNIVERSITÉ CATHOLIQUE DE LOUVAIN   (Belgium)

^b Societe Anonyme Belge de Constructions Aeronautiques   (Belgium)

Author keywords

Aerospace safety; Digital signal processor; Fault tolerance; Open phase failure; Permanent magnet (PM) machine; Reliability; Segment polyphase motor; Torque control

Indexed keywords

CONTROL ARCHITECTURE; CONTROL STRATEGIES; CONTROLLER RECONFIGURATION; DIGITAL SIGNALS; FAULT OPERATION; LAGRANGIAN FORMULATIONS; NORMAL OPERATIONS; OPEN PHASE; OPEN-CIRCUIT FAULT; PERMANENT MAGNET SYNCHRONOUS MACHINES; PERMANENT-MAGNET (PM) MACHINE; SINUSOIDAL CURRENTS; SYNCHRONOUS MACHINE; TEST BENCHES; THEORETICAL RESULT;

FAULT TOLERANCE; RELIABILITY; SIGNAL PROCESSING; SYNCHRONOUS MACHINERY;

TORQUE CONTROL;

EID: 84857388948     PISSN: 02780046     EISSN: None     Source Type: Journal    
DOI: 10.1109/TIE.2011.2170393     Document Type: Article

References (41)

1. A. Boglietti, A. Cavagnino, A. Tenconi, and S. Vaschetto, "The safety critical electric machines and drives in the more electric aircraft: A survey, " in Proc. 35th IEEE IECON, 2009, pp. 2587-2594.
2. A. Garcia, J. Cusido, J. Rosero, J. Ortega, and L. Romeral, "Reliable electro-mechanical actuators in aircraft, " IEEE Aerosp. Electron. Syst. Mag., vol. 23, no. 8, pp. 19-25, Aug. 2008.
3. G. Iordanidis, L. Bagnall, J. Morris, S. Grac, E. Clairardin, J.-C. Mare, S. Ivanov, F. Labrique, M. Basset, J.-P. Lauffenburger, and G. Pouly, "An overview of modelling and simulation activities for an all-electric nose wheel electric system, " in Proc. Int. Conf. Recent Adv. Aerosp. Actuation Syst. Compon., Toulouse, France, 2010, pp. 137-177.
4. B. Mecrow, A. Jack, J. Haylock, and J. Coles, "Fault-tolerant permanent magnet machine drives, " Proc. Inst. Elect. Eng.-Elect. Power Appl., vol. 143, no. 6, pp. 437-442, Nov. 1996. (Pubitemid 126760226)
5. A. Jack, B. Mecrow, and J. Haylock, "A comparative study of permanent magnet and switched reluctance motors for high-performance fault tolerant applications, " IEEE Trans. Ind. Appl., vol. 32, no. 4, pp. 889-895, Jul./Aug. 1996. (Pubitemid 126773866)
6. L. de Lillo, L. Empringham, P. W. Wheeler, S. Khwan-On, C. Gerada, M. N. Othman, and X. Huang, "Multiphase power converter drive for fault-tolerant machine development in aerospace applications, " IEEE Trans. Ind. Electron., vol. 57, no. 2, pp. 575-583, Feb. 2010.
7. R. Jones, "The more electric aircraft: The past and the future?" in Proc. IEE Colloq. Elect. Mach. Syst. More Elect. Aircr. (Ref. No. 1999/180), 1999, pp. 1/1-1/4.
8. M. Villani, M. Tursini, G. Fabri, and L. Castellini, "Fault-tolerant PM brushless DC drive for aerospace application, " in Proc. XIX ICEM, 2010, pp. 1-7.
9. Z. Sun, J. Wang, G. Jewell, and D. Howe, "Enhanced optimal torque control of fault-tolerant PM machine under flux-weakening operation, " IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 344-353, Jan. 2010.
10. S. Dwari and L. Parsa, "An optimal control technique for multiphase PM machines under open-circuit faults, " IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1988-1995, May 2008. (Pubitemid 351728752)
11. C. Oprea and C. Martis, "Fault tolerant permanent magnet synchronous machine for electric power steering systems, " in Proc. SPEEDAM, 2008, pp. 256-261.
12. R. Kianinezhad, B. Nahid-Mobarakeh, L. Baghli, F. Betin, and G. Capolino, "Torque ripples suppression for six-phase induction motors under open phase faults, " in Proc. 32nd IEEE IECON, 2006, pp. 1363-1368.
13. N. Bianchi, S. Bolognani, and M. Pre, "Impact of stator winding of a fivephase permanent-magnetmotor on postfault operations, " IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1978-1987, May 2008. (Pubitemid 351751818)
14. M. Shamsi-Nejad, B. Nahid-Mobarakeh, S. Pierfederici, and F. Meibody- Tabar, "Fault tolerant and minimum loss control of double-star synchronous machines under open phase conditions, " IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1956-1965, May 2008. (Pubitemid 351728750)
15. L. Romeral, J. C. Urresty, J. Riba Ruiz, and A. Garcia Espinosa, "Modeling of surface-mounted permanent magnet synchronous motors with stator winding interturn faults, " IEEE Trans. Ind. Electron., vol. 58, no. 5, pp. 1576-1585, May 2011.
16. E. Levi, "Multiphase electric machines for variable-speed applications, " IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1893-1909, May 2008. (Pubitemid 351751817)
17. C. H. Sneessens, T. Labbé, F. Baudart, F. Labrique, and E. Matagne, "Model and torque control of a five phase PMSM synchronous motor using tooth concentrated windings technology, " in Proc. 8th Int. Symp. Adv. Electromech. Motion Syst., Electromotion, 2009, pp. 1-6.
18. L. Parsa, "On advantages of multi-phase machines, " in Proc. 31st IEEE IECON, 2005, pp. 1574-1579. (Pubitemid 44549513)
19. D. Casadei, M. Mengoni, G. Serra, A. Tani, and L. Zarri, "Optimal faulttolerant control strategy for multi-phase motor drives under an open circuit phase fault condition, " in Proc. 18th ICEM, 2008, pp. 1-6.
20. S. Dwari and L. Parsa, "Fault-tolerant control of five-phase permanentmagnet motors with trapezoidal back EMF, " IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 476-485, Feb. 2011.
21. N. Bianchi, S. Bolognani, and M. Pre, "Strategies for the fault-tolerant current control of a five-phase permanent-magnet motor, " IEEE Trans. Ind. Appl., vol. 43, no. 4, pp. 960-970, Jul./Aug. 2007. (Pubitemid 47249969)
22. A. EL-Refaie, "Fractional-slot concentrated-windings synchronous permanent magnet machines: Opportunities and challenges, " IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 107-121, Jan. 2010.
23. M. Rezaei, "A comprehensive comparison between non-segment and segment polyphase permanent magnet excited synchronous machine, " presented at the Proc. Int. Conf. Electrical Machines (ICEM), Villamoura, Portugal, 2008, Paper ID944.
24. N. Bianchi, S. Bolognani, M. Pre, and G. Grezzani, "Design considerations for fractional-slot winding configurations of synchronous machines, " IEEE Trans. Ind. Appl., vol. 42, no. 4, pp. 997-1006, Jul./Aug. 2006. (Pubitemid 44111478)
25. F. Magnussen and C. Sadarangani, "Winding factors and Joule losses of permanent magnet machines with concentrated windings, " in Proc. IEEE IEMDC, 2003, vol. 1, pp. 333-339.
26. J. Cros and P. Viarouge, "Synthesis of high performance PM motors with concentrated windings, " IEEE Trans. Energy Convers., vol. 17, no. 2, pp. 248-253, Jun. 2002. (Pubitemid 34798941)
27. D. Casadei, G. Serra, A. Tani, and L. Zarri, "General inverter modulation strategy for multi-phase motor drives, " in Proc. IEEE ISIE, 2007, pp. 1131-1137.
28. E. Chiricozzi and M. Villani, "Analysis of fault-tolerant five-phase IPM synchronous motor, " in Proc. IEEE ISIE, 2008, pp. 759-763.
29. M. Barcaro, N. Bianchi, E. Fornasiero, and F. Magnussen, "Experimental comparison between two fault-tolerant fractional-slot multiphase PM motor drives, " in Proc. IEEE ISIE, 2010, pp. 2160-2165.
30. W. Sleszynski, J. Nieznanski, and A. Cichowski, "Open-transistor fault diagnostics in voltage-source inverters by analyzing the load currents, " IEEE Trans. Ind. Electron., vol. 56, no. 11, pp. 4681-4688, Nov. 2009.
31. F. Baudart, B. Dehez, F. Labrique, and E. Matagne, "Optimal sinusoidal currents for avoiding torque pulsations after the loss of one phase in polyphase SMPM synchronous motor, " in Proc. SPEEDAM, Pise, Italie, 2010, pp. 13-18.
32. T. Labbé, B. Dehez, and F. Labrique, "Two phase operation for a three phase PMSM using a control model based on a Concordia like transform associated to a classic Park transform, " Math. Comput. Simul., vol. 81, no. 2, pp. 315-326, Oct. 2010.
33. F. Baudart, B. Dehez, F. Labrique, E. Matagne, D. Telteu, and P. Alexandre, "Control strategy with minimal controller reconfiguration of fault tolerant polyphase PMSM drives under open circuit fault of one phase, " in Proc. XIX ICEM, Rome, Italy, 2010, pp. 1-6.
34. A. Wu and P. Chapman, "Simple expressions for optimal current waveforms for permanent-magnet synchronous machine drives, " IEEE Trans. Energy Convers., vol. 20, no. 1, pp. 151-157, Mar. 2005. (Pubitemid 40377534)
35. J.-R. Fu and T. Lipo, "Disturbance-free operation of a multiphase currentregulated motor drive with an opened phase, " IEEE Trans. Ind. Appl., vol. 30, no. 5, pp. 1267-1274, Sep./Oct. 1994.
36. S. Ivanov, V. Defosse, F. Labrique, and P. Sente, "Control under normal and fault operation of a PM synchronous motor with physically and magnetically decoupled phases, " in Proc. SPEEDAM, 2008, pp. 878-883.
37. S. Dwari and L. Parsa, "Optimal current waveforms for five-phase permanent magnet motor drives under open-circuit fault, " in Proc. IEEE Power Energy Soc. Gen.Meeting-Conversion and Delivery of Electrical Energy in the 21st Century, 2008, pp. 1-5.
38. R. Kianinezhad, B. Nahid-Mobarakeh, L. Baghli, F. Betin, and G. Capolino, "Modeling and control of six-phase symmetrical induction machine under fault condition due to open phases, " IEEE Trans. Ind. Electron., vol. 55, no. 5, pp. 1966-1977, May 2008. (Pubitemid 351728751)
39. M. Fnaiech, F. Betin, G. Capolino, and F. Fnaiech, "Fuzzy logic and sliding-mode controls applied to six-phase induction machine with open phases, " IEEE Trans. Ind. Electron., vol. 57, no. 1, pp. 354-364, Jan. 2010.
40. G. Aroquiadassou, A. Mpanda-Mabwe, F. Betin, and G. Capolino, "Sixphase induction machine drive model for fault-tolerant operation, " in Proc. IEEE SDEMPED, 2009, pp. 1-6.
41. D. Campos-Delgado and D. Espinoza-Trejo, "An observer-based diagnosis scheme for single and simultaneous open-switch faults in induction motor drives, " IEEE Trans. Ind. Electron., vol. 58, no. 2, pp. 671-679, Feb. 2011.