Rheometric study of the gelation and fusion processes of poly(vinyl chloride-co-vinyl acetate) plastisols with different commercial plasticizers

Journal of Vinyl and Additive Technology

Volumn 18, Issue 1, 2012, Pages 1-8

  Zoller, Agnes ^a   Marcilla, Antonio ^a  

^a UNIVERSITY OF ALICANTE   (Spain)

Author keywords

[No Author keywords available]

Indexed keywords

ACETATE COPOLYMERS; ADIPATES; COMPLEX VISCOSITY; DYNAMIC PROCESS; FOAMING PROCESS; FUSION PROCESS; LINEAR CHAIN; PENTAERYTHRITOL ESTERS; PHTHALATE ESTER; PVC PLASTISOLS; RHEOLOGICAL BEHAVIORS; RHEOLOGICAL PROPERTY; RHEOMETRIC STUDIES;

BLOWING AGENTS; CARBOXYLATION; CHLORINE COMPOUNDS; COAGULATION; ESTERIFICATION; ESTERS; FUNCTIONAL GROUPS; GAS FOAMING; GELATION; MOLECULAR WEIGHT; PLASTICIZERS; PLASTISOLS; REINFORCED PLASTICS; RHEOLOGY; SOLVENTS; STRUCTURE (COMPOSITION);

POLYVINYL CHLORIDES;

EID: 84857369320     PISSN: 10835601     EISSN: 15480585     Source Type: Journal    
DOI: 10.1002/vnl.20290     Document Type: Article

References (53)

1. W.V. Titov, PVC Technology, Elsevier Applied Science, New York (1986).
2. W.V. Titov, PVC Plastics, Elsevier Applied Science (1990).
3. R. Babinsky, Plast. Addit. Compound., 8, 1 (2006).
4. N. Nakajima, D.W. Ward, and, E.A. Collins, J. Appl. Polym. Sci., 20, 5 (1976).
5. N. Nakajima, and, C.A. Daniels, J. Appl. Polym. Sci., 25, 9 (1980).
6. A.H. Landrock, Thermoplastic Foams, William Andrew Publishing (1995).
7. A.H. Landrock, Handbook of Plastic Foams, Noyes Publications (1995).
8. M. Kobayashi, Structure of Gels, Characterization Techniques, Academic Press (2001).
9. G. Wypych, Handbook of Plasticizers, ChemTec (William Andrew) (2004).
10. A. Marcilla, and, J.C. García, Eur. Polym. J., 33, 3 (1997).
11. N. Nakajima, M.H. Chu, and, Z.G. Wang, J. Elast. Plast., 22, 3 (1990).
12. M.A. Semsarzadeh, M. Mehrabzadeh, and, S.S. Arabshahi, Eur. Polym. J., 38, 2 (2002).
13. P.H. Daniels, J. Vinyl Addit. Technol., 13, 3 (2007).
14. J.C. Garcia, and, A. Marcilla, Polymer, 39, 15 (1998).
15. G.M. Kavanagh, and, S.B. Ross-Murphy, Prog. Polym. Sci., 23, 3 (1998).
16. P. Persico, V. Ambrogi, D. Acierno, and, C. Carfagna, J.Vinyl Addit. Technol., 15, 3 (2009).
17. K. Saeki, K. Funatsu, and, K. Tanabe, Anal. Sci., 19, 2 (2003).
18. J.S. Jourdan, and, D.P. Owen, J. Vinyl Addit. Technol., 14, 3 (2008).
19. O. Fenollar, D. García, L. Sánchez, J. Lõpez, and, R. Balart, Eur. Polym. J., 45, 9 (2009).
20. N. Nakajima, D.W. Ward, and, E.A. Collins, Polym. Eng. Sci., 19, 3 (1979).
21. N. Nakajima, M.R. Sadeghi, and, T. Kyu, J. Appl. Polym. Sci., 41, 5 (1990).
22. A. Zoller, and, A. Marcilla, J. Appl. Polm. Sci., 121, 3314 (2011).
23. N. Nakajima, C.M. Yavornitzky, E.J. Roche, and, E.R. Harrell, J. Appl. Polym. Sci., 32, 2 (1986).
24. J.C. Garcia, and, A. Marcilla, Polymer, 39, 2 (1998).
25. R. Gächter, and, H. Müller, Plastics Additives Handbook: Stabilizers, Processing Aids, Plasticizers, Fillers, Reinforcements, Colorants for Thermoplastics, Carl Hanser, GmbH & Co.; Oxford University Press, Inc. (1993).
26. H. Boudhani, C. Lainé, R. Fulchiron, and, P. Cassagnau, Rheol. Acta, 46, 6 (2007).
27. R.J. Crawford, and, J.L. Throne, Rotational Molding Polymers, William Andrew Publishing (2002).
28. G.G. Liang, W.D. Cook, H.J. Sautereau, and, A. Tcharkhtchi, Polymer, 50, 12 (2009).
29. D. Heitkamp, Thermal Properties of Azodicarbonamide Formulations Bayer Report, Leverkusen, Germany,.
30. H. Demir, M. Sipahioglu, D. Balköse, and, S. Alkü, J. Mater. Process. Technol., 195, 1 (2008).
31. T. BilgiÁ, Processing of PVC, William Andrew Publishing (1998).
32. R. Lee, C.W. Lanier, and, E.H. Broemmelsiek, U.S. Patent 4804504(1989).
33. T. Hori, and, K. Ueki, U.S. Patent 5162380(1992).
34. B.S. Shin, J.Y. Lee, D.K. Kim, S.J. Kim, and, S.O. Cho, U.S. Patent 5776993(1998).
35. J. Markarian, Plast. Addit. Compound. 11, 1 (2009)
36. J. Wang, Rheology of Foaming Polymers and Its Influence on Microcellular Processing, University of Toronto (2009).
37. J. Stange, and, H. Munstedt, J. Rheol., 50, 6 (2006).
38. D. Byrne, Official J. Eur. Union, L315, 46 (1999).
39. U. Heudorf, V. Mersch-Sundermann, and, J. Angerer, Int. J. Hygiene Environ. Health, 5, 210 (2007).
40. M. Matsumoto, M. Hirata-Koizumi, and, M. Ema, Regul. Toxicol. Pharmacol., 50, 1 (2008).
41. E.H. Hull, and, K.K. Mathur, Modern Plast. Int., 61, 5 (1984).
42. R.E. Kirk, and, D.F. Othmer, Encyclopedia of Chemical Technology, John Wiley & Sons, New York (1982).
43. N. Nakajima, J.D. Isner, and, E.R. Harrell, J. Macromol. Sci. Part B, 20, 3 (1981).
44. N. Nakajima, and, E.R. Harrell, J. Appl. Polym. Sci., 95, 2 (2005).
45. S. J. Willey, and, C.W. Macosko, J. Rheol., 26, 557 (1982).
46. N. Nakajima, and, D.W. Ward, J. Appl. Polym. Sci., 28, 2 (1983).
47. F. Gallego, M.E. Muñoz, J.J. Peña, and, A. Santamaría, Eur. Polym. J., 24, 4 (1988).
48. N. Nakajima, and, M.R. Sadeghi, Int. Polym. Process., 4, 16 (1989).
49. J. Stange, and, H. Münstedt, J. Cell. Plast., 42, 6 (2006).
50. J. Meissner, and, J. Hostletter, Rheol. Acta, 33, 1 (1994).
51. R. Yu, W. Yu, C. Zhou, and, J.J. Feng, Polym. Test., 24, 4 (2005).
52. A. Marcilla, and, M. Beltrán, Polym. Degrad. Stab., 60, 1 (1998).
53. K. Aouachria, and, N. Belhaneche-Bensemra, Polym. Degrad. Stab., 91, 3 (2006).