Hybrid organic-inorganic multilayer coatings including nanocontainers for corrosion protection of metal alloys

Corrosion Science

Volumn 57, Issue , 2012, Pages 56-66

  Kartsonakis, I A ^a,b   Koumoulos, E P ^b   Balaskas, A C ^a   Pappas, G S ^a   Charitidis, C A ^b   Kordas, G C ^a  

^a INSTITUTE OF NANOSCIENCE AND NANOTECHNOLOGY   (Greece)

^b NATIONAL TECHNICAL UNIVERSITY OF ATHENS   (Greece)

Author keywords

A. Aluminium; B. EIS; C. Electrodeposited films; C. Pitting corrosion

Indexed keywords

2024-T3; B. EIS; CATHODIC CURRENTS; CONDUCTIVE POLYMER; ELECTRODEPOSITED FILMS; MULTI-LAYER-COATING; NANOCONTAINERS; ORGANIC-INORGANIC; PROTECTION OF METALS; PROTECTIVE PROPERTIES; SOL-GEL COATINGS; TWO LAYERS;

CERIUM ALLOYS; CORROSION PROTECTION; CORROSION RESISTANCE; NANOTUBES; PITTING; SOL-GELS;

INORGANIC COATINGS;

EID: 84857043350     PISSN: 0010938X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.corsci.2011.12.034     Document Type: Article

References (59)

1. Park R.M., Bena J.F., Stayner L.T., Smith R.J., Gibb H.J., Lees P.S.J. Hexavalent chromium and lung cancer in the chromate industry: a quantitative risk assessment. Risk Anal. 2004, 24:1099-1108.
2. Cabral A., Duarte R.G., Montemor M.F., Zheludkevich M.L., Ferreira M.G.S. Analytical characterisation and corrosion behaviour of bis-[triethoxysilylpropyl]tetrasulphide pre-treated AA2024-T3. Corros. Sci. 2005, 47:869-881.
3. 2 nanoparticles on the protection of AA2024. Corros. Sci. 2008, 50:1283-1291.
4. Pathak S.S., Khanna A.S., Sinha T.J.M. HMMM cured corrosion resistance waterborne ORMOSIL coating for aluminium alloy. Prog. Org. Coat. 2007, 60:211-218.
5. Raps D., Hack T., Wehr J., Zheludkevich M.L., Bastos A.C., Ferreira M.G.S., Nuyken O. Electrochemical study of inhibitor-containing organic-inorganic hybrid coatings on AA2024. Corros. Sci. 2009, 51:1012-1021.
6. Aldissi M. Proceedings of the international conference of science and technology of synthetic metals. Synth. Met. 1988, 27:AR13-AR14.
7. Epstein A.J. Electrically conducting polymers: science and technology. MRS Bull. 1997, 22:16-23.
8. Simpson J.H., Rice D.M., Rossito F.C., Lahti P., Karasz F.E. A multitechnique investigation of sodium-doped poly(p-phenylenevinylene). Polymer 1993, 34:4595-4601.
9. MacDiarmid A.G. Short Course on Conductive Polymers 1985, SUNY, New Platz, NY.
10. Shabani-Nooshabadi M., Ghoreishi S.M., Behpour M. Direct electrosynthesis of polyaniline-montmorillonite nanocomposite coatings on aluminum alloy 3004 and their corrosion protection performance. Corros. Sci. 2011, 53:3035-3042.
11. Cecchetto L., Ambat R., Davenport A.J., Delabouglise D., Petit J.-P., Neel O. Emeraldine base as corrosion protective layer on aluminium alloy AA5182, effect of the surface microstructure. Corros. Sci. 2007, 49:818-829.
12. Epsteinax A.J., Smallfield J.A., Guana H., Fahlmanb M. Corrosion protection of aluminium and aluminium alloys by polyanilines: a potentiodynamic and photoelectron spectroscopy study. Synth. Met. 1999, 102:1374-1376.
13. Huerta-Vilca D., Moraes S.R., Motheo A.J. Electrosynthesized polyaniline for the corrosion protection of aluminium alloy 2024-T3. J. Braz. Chem. Soc. 2003, 14:52-58.
14. Conroy K.G., Breslin C.B. The electrochemical deposition of polyaniline at pure aluminium: electrochemical activity and corrosion protection properties. Electrochim. Acta 2003, 48:721-732.
15. He J., Johnston-Gelling V., Tallman D.E., Bierwagen G.P., Wallace G.G. Conducting polymers and corrosion III. A scanning vibrating electrode study of poly(3-octyl pyrrole) on steel and aluminium. J. Electrochem. Soc. 2000, 147:3667-3672.
16. Gelling V.J., Wiest M.M., Tallman D.E., Bierwagen G.P., Wallace G.G. Electroactive-conducting polymers for corrosion control. Studies of poly(3-octyl pyrrole) and poly(3-octadecyl pyrrole) on aluminium 2024-T3 alloy. Prog. Org. Coat. 2001, 43:149-157.
17. Iroh J.O., Zhu Y., Shah K., Levine K., Rajagopalan R., Uyar T., Donley M., Mantz R., Johnson J., Voevodin N.N., Balbyshev V.N., Khramov A.N. Electrochemical synthesis: a novel technique for processing multi-functional coatings. Prog. Org. Coat. 2003, 47:365-375.
18. Akundy G.S., Rajagopalan R., Iroh J.O. Electrochemical deposition of polyaniline-polypyrrole composite coatings on aluminium. J. Appl. Polym. Sci. 2002, 83:1970-1977.
19. Tsirimpis A., Kartsonakis I., Danilidis I., Liatsi P., Kordas G. Synthesis of conductive polymeric composite coatings for corrosion protection applications. Prog. Org. Coat. 2010, 67:389-397.
20. Sanyal B. Organic compounds as corrosion inhibitors in different environments - a review. Prog. Org. Coat. 1981, 9:165-236.
21. Kartsonakis I.A., Daniilidis I., Kordas G. Encapsulation of the corrosion inhibitor 8-hydroxyquinoline into ceria nanocontainers. J. Sol-Gel Sci. Technol. 2008, 48:24-31.
22. Kelly R.G., Scully J.R., Shoesmith D.W., Buchheit R.G. Electrochemical Techniques in Corrosion Science and Engineering 2003, Marcel Dekker Inc., pp. 60-66.
23. Elewady G.Y., El-Said I.A., Fouda A.S. Anion Surfactants as Corrosion Inhibitors for Aluminum Dissolution in HCl Solutions. Int. J. Electrochem. Sci. 2008, 3:177-190.
24. Abdallah M., Fouda A.S., Shama S.A., Afifi E.A. Azodyes as corrosion inhibitors for dissolution of C-steel in hydrochloric acid solution. Afr. J. Pure Appl. Chem. 2008, 2:83-91.
25. Khaled K.F. New synthesized guanidine derivative as a green corrosion inhibitor for mild steel in acidic solutions. Int. J. Electrochem. Sci. 2008, 3:462-475.
26. Charitidis C.A. Nanomechanical and nanotribological properties of carbon-based thin films: a review. Refract. Met. Har. Mater. 2010, 28:51-70.
27. Feng G., Ngan A.H.W. Effects of creep and thermal drift on modulus measurement using depth-sensing indentation. Mater. Res. 2002, 17:660-668.
28. Bei H., George E.P., Hay J.L., Pharr G.M. Influence of indenter tip geometry on elastic deformation during nanoindentation. Phys. Rev. Lett. 2005, 95:045501-1-045501-4.
29. Troyon M., Huang L. Comparison of different analysis methods in nanoindentation and influence on the correction factor for contact area. Surf. Coat. Technol. 2006, 201:1613-1619.
30. Croissant M.J., Napporn T., Léger J.M., Lamy C. Electrocatalytic oxidation of hydrogen at platinum-modified polyaniline electrodes. Electrochim. Acta 1998, 43:2447-2457.
31. Shah K.G., Akundy G.S., Iroh J.O. Polyaniline coated on aluminium (Al-2024-T3): characterization and elecrtochemical studies. J. Appl. Polym. Sci. 2002, 85:1669-1675.
32. Akundy G.S., Iroh J.O. Polypyrrole coatings on aluminium-synthesis and characterization. Polymer 2001, 42:9665-9669.
33. Fahlman M., Jasty S., Epstein A.J. Corrosion protection of iron/steel by emeraldine base polyaniline: an X-ray photoelectron spectroscopy study. Synth. Met. 1997, 85:1323-1326.
34. Hummel O., Solti A. Atlas of Polymer and Plastics Analysis 1988, vol. 2. VCH Publications.
35. Bellamis L.J. The Infra-red Spectra of Complex Molecules 1975, Chapman and Hall.
36. Silverstein R.M., Bassler G.C., Morrill T.C. Spectroscopic Identification of Organic Compounds 1981, John Wiley & Sons.
37. Mijovic J., Fishbain A., Wijaya J. Mechanistic modeling of epoxy-amine kinetics. 2. Comparison of kinetics in thermal and microwave fields. Macromolecules 1992, 25:986-989.
38. Metroke T.L., Kachurina O., Knobbe E.T. Spectroscopic and corrosion resistance characterization of amine and super acid-cured hybrid organic-inorganic thin films on 2024-T3 aluminum alloy. Prog. Org. Coat. 2002, 44:185-199.
39. Wu K.H., Li M.C., Yang C.C., Wang G.P. Domain size and thermal stability of amine-cured hybrid films as corrosion resistance treatments for aluminium alloy. J. Non-Cryst. Solids 2006, 352:2897-2904.
40. Wu K.H., Chang T.C., Yang C.C., Wang G.P. Dynamics and corrosion resistance of amine-cured organically modified silicate coatings on aluminium alloys. Thin Solid Films 2006, 513:84-89.
41. Hsu C.H., Mansfeld F. Technical note: concerning the conversion of the constant phase element parameter Y0 into a capacitance. Corrosion 2001, 57:747-748.
42. Barsoukov E., Macdonald J.R. Impedance Spectroscopy Theory, Experiment, and Applications 2005, A John Wiley & Sons, Inc., Publication, USA, pp. 13-20.
43. Cole K.S., Cole R.H. Dispersion and absorption in dielectrics. II. Direct current characteristics. J. Chem. Phys. 1942, 10:98-105.
44. Wang H., Akid R. A room temperature cured sol-gel anticorrosion pre-treatment for Al 2024-T3 alloys. Corros. Sci. 2007, 49:4491-4503.
45. 2-filled sol-gel coatings for corrosion protection of AA2024-T3 aluminium alloy. Corros. Sci. 2009, 51:2304-2315.
46. Kartsonakis I.A., Balaskas A.C., Kordas G.C. Influence of cerium molybdate containers on the corrosion performance of epoxy coated aluminium alloys 2024-T3. Corros. Sci. 2011, 53:3771-3779.
47. Balaskas A.C., Kartsonakis I.A., Kordas G.C., Cabral A.M., Morais P.J. Influence of the doping agent on the corrosion protection properties of polypyrrole grown on aluminium alloy 2024-T3. Prog. Org. Coat. 2011, 71:181-187.
48. Oliver W.C., Pharr G.M. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. Mater. Res. 1992, 7:1564-1583.
49. Sneddon I.N. Boussinesq's problem for a rigid cone. Proc. Camb. Philos. Soc. 1948, 44:492-507.
50. King R.B. Elastic analysis of some punch problems for layered medium. Int. J. Sol. Struct. 1987, 23:1657-1664.
51. Rodriguez R., Gutierrez I. Correlation between nanoindentation and tensile properties influence of the indentation size effect. Mater. Sci. Eng. A 2003, 361:377-384.
52. Palmisano G., Le Bourhis Eric, Ciriminna R., Tranchida D., Pagliaro M. ORMOSIL thin films: tuning mechanical properties via a nanochemistry approach. Langmuir 2006, 22:11158-11162.
53. Cheng Y.T., Cheng C.M. What is indentation hardness?. Surf. Coat. Technol. 2000, 133:417-424.
54. Leyland A., Matthews A. Design criteria for wear-resistant nanostructured and glassy-metal coatings. Surf. Coat. Technol. 2004, 177:317-324.
55. Fischer-Cripps A.C. A simple phenomenological approach to nanoindentation creep. Mater. Sci. Eng. A 2004, 385:74-82.
56. Rar A., Sohn S., Oliver W.C., Goldsby D.L., Tullis T.E., Pharr G.M. On the measurement of creep by nanoindentation with continuous stiffness techniques. Mater. Res. Soc. 2005, (Boston, MA, USA).
57. Hill R., Storakers B., Zdunek A.B. A theoretical study of the Brinell hardness test. Math. Phys. Sci. 1989, 423:301-330.
58. Biwa S., Storakers B. An analysis of fully plastic Brinell indentation. Mech. Phys. Sol. 1995, 43:1303-1334.
59. H. Hertz, Experiments to Determine an Upper Limit for the Kinetic Energy of an Electric Current, Miscellaneous Papers by H. Hertz, Macmillan, 1896.