A mixed method for free and forced vibration of rectangular plates

Applied Mathematical Modelling

Volumn 36, Issue 6, 2012, Pages 2814-2831

  Eftekhari, S A ^a   Jafari, A A ^a  

^a K N TOOSI UNIVERSITY OF TECHNOLOGY   (Iran)

Author keywords

DQ method; Free and forced vibration; Rectangular plates; Ritz method

Indexed keywords

ANALYTICAL AND NUMERICAL SOLUTIONS; DIFFERENTIAL QUADRATURE METHODS; DQ METHOD; FREE AND FORCED VIBRATIONS; MIXED METHOD; NUMERICAL RESULTS; PARTIAL DERIVATIVES; RECTANGULAR PLATES; RITZ METHODS; STRONG FORM; VIBRATION PROBLEM;

BOUNDARY CONDITIONS; PARTIAL DIFFERENTIAL EQUATIONS; VIBRATIONS (MECHANICAL);

NUMERICAL METHODS;

EID: 84857033666     PISSN: 0307904X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.apm.2011.09.050     Document Type: Article

References (57)

1. A.W. Leissa, Vibration of Plates, Washington, NASA SP-160, US Government Printing Office, 1969.
2. Leissa A.W. The free vibration of rectangular plates. J. Sound. Vib. 1973, 31(3):257-293.
3. Timoshenko S.P., Woinowsky-Krieger S. Theory of Plates and Shells 1959, McGraw-Hill, New York.
4. Leissa A.W. The historical bases of the Rayleigh and Ritz methods. J. Sound Vib. 2005, 287:961-978.
5. Ilanko S. Comments on the historical bases of the Rayleigh and Ritz methods. J. Sound Vib. 2009, 319:731-733.
6. Young D. Vibration of rectangular plates by the Ritz method. ASME J. Appl. Mech. 1950, 17:448-453.
7. Bassily S.F., Dickinson S.M. On the use of beam functions for problems of plates involving free edges. ASME J. Appl. Mech. 1975, 42:858-864.
8. Bhat R.B. Natural frequencies of rectangular plates using characteristic orthogonal polynomials in Rayleigh-Ritz method. J. Sound Vib. 1985, 102:493-499.
9. Liew K.M., Lam K.Y. A set of orthogonal plate functions for vibration analysis of regular polygonal plates. ASME J. Vib. Acoust. 1991, 113:182-186.
10. Lim C.W., Liew K.M. Vibrations of perforated plates with rounded corners. J. Eng. Mech. 1995, 121(2):203-213.
11. Leung A.Y.T., Chan J.K.W. Fourier p-element for analysis of beams and plates. J. Sound Vib. 1998, 212(1):179-185.
12. Zienkiewicz O.C., Taylor R.L. The Finite Element Method 1989, vol. 1. McGraw-Hill, New York.
13. Reddy J.N. An Introduction to the Finite Element Method 1993, McGraw-Hill, New York. second ed.
14. Fan S.C., Cheung Y.K. Flexural free vibrations of rectangular plates with complex support conditions. J. Sound Vib. 1984, 93:81-94.
15. Chia C.Y. Non-linear vibration of anisotropic rectangular plates with non-uniform edge constraints. J. Sound Vib. 1985, 101:539-550.
16. Leipholz H.H.E. On some developments in direct methods of the calculus of variations. ASME Appl. Mech. Rev. 1987, 40(10):1379-1392.
17. Zitnan P. Vibration analysis of membranes and plates by a discrete least squares technique. J. Sound Vib. 1996, 195(4):595-605.
18. Belytschko T., Lu Y.Y., Gu L. Element-free Galerkin methods. Int. J. Numer. Methods Eng. 1994, 37:229-256.
19. Donning B.M., Liu W.K. Meshless methods for shear-deformable beams and plates. Comput. Methods Appl. Mech. Eng. 1998, 152:47-71.
20. Shu C. Differential Quadrature and its Application in Engineering 2000, Springer Publication, New York.
21. Bert C.W., Kang S.K., Striz A.G. Two new approximate methods for analyzing free vibration of structural components. AIAA 1988, 26:612-618.
22. Wang X., Bert C.W. A new approach in applying differential quadrature to static and free vibrational analysis of beams and plates. J. Sound Vib. 1993, 162(3):566-572.
23. Bert C.W., Wang X., Striz A.G. Differential quadrature analysis of deflection, buckling, and free vibration of beams and rectangular plates. Comput. Struct. 1993, 48(3):473-479.
24. Bert C.W., Malik M. Semianalytical differential quadrature solution for free vibration analysis of rectangular plates. AIAA 1996, 34(3):601-606.
25. Du H., Liew K.M., Lim M.K. Generalized differential quadrature method for buckling analysis. ASCE J. Eng. Mech. 1996, 122:95-100.
26. Civalek Ö. Application of differential quadrature (DQ) and harmonic differential quadrature (HDQ) for buckling analysis of thin isotropic plates and elastic columns. Eng. Struct. 2004, 26(2):171-186.
27. Wang X., Wang X., Shi X. Accurate buckling loads of thin rectangular plates under parabolic edge compressions by the differential quadrature method. Int. J. Mech. Sci. 2007, 49:447-453.
28. Wang X., Gan L., Zhang Y. Differential quadrature analysis of the buckling of thin rectangular plates with cosine-distributed compressive loads on two opposite sides. Adv. Eng. Softw. 2008, 39:497-504.
29. Tang Y., Wang X. Buckling of symmetrically laminated rectangular plates under parabolic edge compression. Int. J. Mech. Sci. 2011, 53:91-97.
30. Alipour M.M., Shariyat M., Shaban M. A semi-analytical solution for free vibration and modal stress analyses of circular plates resting on two-parameter elastic foundations. J. Solid Mech. 2010, 2(1):63-78.
31. Wei G.W., Zhao Y.B., Xiang Y. The determination of natural frequencies of rectangular plates with mixed boundary conditions by discrete singular convolution. Int. J. Mech. Sci. 2001, 43:1731-1746.
32. Ng C.H.W., Zhao Y.B., Wei G.W. Comparison of discrete singular convolution and generalized differential quadrature for the vibration analysis of rectangular plates. Comput. Methods Appl. Mech. Eng. 2004, 193:2483-2506.
33. Civalek Ö., Korkmaz A., Demir C. Discrete singular convolution approach for buckling analysis of rectangular Kirchhoff plates subjected to compressive loads on two-opposite edges. Adv. Eng. Softw. 2010, 41:557-560.
34. Reddy J.N. Theory and Analysis of Elastic Plates and Shells 2007, CRC Press, Taylor & Francis Group, New York.
35. Narita Y. Combinations for the free-vibration behaviors of anisotropic rectangular plates under general edge conditions. ASME J. Appl. Mech. 2000, 67:568-573.
36. Bellman R.E., Casti J. Differential quadrature and long term integrations. J. Math. Anal. Appl. 1971, 34:235-238.
37. Bellman R.E., Kashef B.G., Casti J. Differential quadrature: a technique for the rapid solution of nonlinear partial differential equations. Comput. Phys. 1972, 10:40-52.
38. Bert C.W., Malik M. Differential quadrature method in computational mechanics: a review. ASME J. Appl. Mech. Rev. 1996, 49:1-28.
39. Tanaka M., Chen W. Coupling dual reciprocity BEM and differential quadrature method for time-dependent diffusion problems. Appl. Math. Model. 2001, 25:257-268.
40. Tanaka M., Chen W. Dual reciprocity BEM applied to transient elastodynamic problems with differential quadrature method in time. Comput. Methods Appl. Mech. Eng. 2001, 190:2331-2347.
41. Fung T.C. Solving initial value problems by differential quadrature method - Part 2: Second- and higher-order equations. Int. J. Numer. Methods Eng. 2001, 50:1429-1454.
42. Shu C., Yao K.S. Block-marching in time with DQ discretization: an efficient method for time-dependent problems. Comput. Methods Appl. Mech. Eng. 2002, 191:4587-4597.
43. Fung T.C. Stability and accuracy of differential quadrature method in solving dynamic problems. Comput. Methods Appl. Mech. Eng. 2002, 191:1311-1331.
44. Eftekhari S.A., Farid M. Dynamic analysis of multi-span laminated composite coated beams carrying multiple accelerating oscillators. ASME Appl. Mech. Dev. 2006, 257:83-92. (Paper No. IMECE2006-13872).
45. Civalek Ö. Nonlinear analysis of thin rectangular plates on Winkler-Pasternak elastic foundations by DSC-HDQ methods. Appl. Math. Model. 2007, 31:606-624.
46. Eftekhari S.A., Farid M., Khani M. Dynamic analysis of laminated composite coated beams carrying multiple accelerating oscillators using a coupled finite element-differential quadrature method. ASME J. Appl. Mech. 2009, 76:061001:1-061001:13.
47. Eftekhari S.A., Khani M. A coupled finite element-differential quadrature element method and its accuracy for moving load problem. Appl. Math. Model. 2010, 34:228-237.
48. Khalili S.M.R., Jafari A.A., Eftekhari S.A. A mixed Ritz-DQ method for forced vibration of functionally graded beams carrying moving loads. Compos. Struct. 2010, 92(10):2497-2511.
49. Jafari A.A., Eftekhari S.A. A new mixed finite element-differential quadrature formulation for forced vibration of beams carrying moving loads. ASME J. Appl. Mech. 2011, 78(1):011020:1-011020:16.
50. Malik M., Bert C.W. Implementing multiple boundary conditions in the DQ solution of higher-order PDE's: application to free vibration of plates. Int. J. Numer. Methods Eng. 1996, 39:1237-1258.
51. Shu C., Du H. A generalized approach for implementing general boundary conditions in the GDQ free vibration analyses of plates. Int. J. Solids Struct. 1997, 34:837-846.
52. Jang S.K., Bert C.W. Application of differential quadrature to static analysis of structural components. Int. J. Numer. Methods Eng. 1989, 28:561-577.
53. Shu C., Du H. Implementation of clamped and simply supported boundary conditions in the GDQ free vibration analysis of plates. Int. J. Solids Struct. 1997, 34(7):819-835.
54. Bathe K.J. Finite Element Procedures in Engineering Analysis 1982, Prentice-Hall, Englewood Cliffs, NJ.
55. Quan J.R., Chang C.T. New insights in solving distributed system equations by the quadrature methods, I: Analysis. Comput. Chem. Eng. 1989, 13:779-788.
56. Wang X., Xu S. Free vibration analysis of beams and rectangular plates with free edges by the discrete singular convolution. J. Sound Vib. 2010, 329(10):1780-1792.
57. Fryba L. Vibration of Solids and Structures under Moving Loads 1999, Thomas Telford Ltd., Czech Republic. third ed.