Evaluation of physico-mechanical properties and in vitro biocompatibility of compression molded HDPE based biocomposites with HA/Al 2O 3 ceramic fillers and titanate coupling agents

Journal of Applied Polymer Science

Volumn 124, Issue 4, 2012, Pages 3051-3063

  Tripathi, Garima ^a   Dubey, Ashutosh Kumar ^a   Basu, Bikramjit ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY KANPUR   (India)

Author keywords

cell adhesion; composite; coupling agent; HDPE; microstructure

Indexed keywords

BIO-COMPOSITES; BIOACTIVE CERAMIC; BIOINERT; CELL VIABILITY; CELLULAR RESPONSE; CERAMIC FILLERS; COMPOSITE; COMPOSITE FABRICATION; CYTOCOMPATIBILITY; FOURIER TRANSFORMED INFRARED SPECTROSCOPY; HYBRID COMPOSITES; IN-VITRO; MATRIX; MOLDED COMPOSITES; OSTEOBLAST-LIKE CELLS; PHYSICOMECHANICAL PROPERTIES; TITANATE COUPLING AGENTS;

ALUMINA; BIOCOMPATIBILITY; BIOMECHANICS; CELL ADHESION; CELL CULTURE; CERAMIC MATERIALS; COMPRESSION MOLDING; COUPLING AGENTS; DENSITY (SPECIFIC GRAVITY); FILLERS; HYDROXYAPATITE; INFRARED SPECTROSCOPY; MICROSTRUCTURE; OPTIMIZATION; SCANNING ELECTRON MICROSCOPY; STIFFNESS; TITANIUM; X RAY DIFFRACTION;

HIGH DENSITY POLYETHYLENES;

EID: 84856708428     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.35339     Document Type: Article

References (26)

1. Huang, J.,;, Di Silvio, L.,;, Wang, M.,;, Rehman, I.,;, Ohtsuki, C.,;, Bonfield, W., J Mater Sci Mater Med 1997, 8, 809.
2. Hench, L. L., J Am Ceram Soc 1998, 81, 1705.
3. Downes, R. N.,;, Vardy, S.,;, Tanner, K. E.,;, Bonfield, W., In Bioceramics 4, Bonfield, W.,;, Tanner, K. E.,;, Hastings, G. W., Eds.; Butterworth Heinemann: Oxford, 1991.
4. Tanner, K. E.,;, Downes, R. N.,;, Bonfield, W., Brit Ceram Trans 1994, 93, 104.
5. Deb, S.,;, Wang, M.,;, Tanner, K. E.,;, Bonfield, W., J Mater Sci Mater Med 1996, 7, 191.
6. Bodhak, S.,;, Nath, S.,;, Basu, B., J Biomater Appl 2009, 23, 407.
7. Xavier, S. F.,;, Schultz, J. M.,;, Friedrich, K. J., Mater Sci 1990, 25, 2428.
8. Sousa, R. A.,;, Reis, R. L.,;, Cunha, A.,;, Bevis, M. J., J Appl Polym Sci 2002, 86, 2873.
9. Rothon, R. N., In Particulate-Filled Polymer Composites;, Rothon, R. N., Ed.; Longman Scientific & Technical: Harlow, UK, 1995.
10. Iwashita, N.,;, Psomiadou, E.,;, Sawada, Y., Compos Part A: Appl Sci Manufact 1998, 29, 965.
11. Shiguo, D.,;, Jianfei, C.,;, Yinghong, X.,;, Faxiang, J.,;, Xiaoying, J., Appl Polym Sci 1997, 63, 1259.
12. Menon, N.,;, Blum, F. D.,;, Dharani, I. R., J Appl Polym Sci 1994, 54, 113.
13. Singh, B.,;, Verma, A.,;, Gupta, M., J Appl Polym Sci 1998, 70, 1847.
14. Hunt, K. N.,;, Evans, J. R. G.,;, Woodthorpe, K., J Polym Eng Sci 1998, 28, 1572.
15. Monte, S. J.,;, Sugerman, G., Polym Eng Sci 1984, 24, 1369.
16. Kharade, A. Y.,;, Kale, D. D., J Appl Polym Sci 1999, 72, 1321.
17. Nath, S.,;, Bodhak, S.,;, Basu, B., J Biomed Mater Res: Part B Appl Biomater 2009, 88, 1.
18. Nath, S.,;, Dey, A.,;, Mukhopadhyay, A. K.,;, Basu, B., Mater Sci Eng 2009, 513/514, 197.
19. American Society for Testing and Materials. Standard Test Method for Dynamic Young's Modulus, Shear Modulus and Poission's Ratio for Advanced Ceramics by Impulse Ecitation of Vibration ASTM Designation; Philadelphia: American Society for Testing and Materials C1259-95, 1995.
20. Nath, S.,;, Kalmodia, S.,;, Basu, B., J Mater Sci Mater Med 2010, 21, 1273.
21. Kalmodia, S.,;, Molla, A. R.,;, Basu, B., J Mater Sci Mater Med 2010, 21, 1297.
22. Zysset, P. K.,;, Edward, G. X.,;, Hoffler, C. E.,;, Moore, K. E.,;, Goldstein, S. A., J Biomech 1999, 32, 1005.
23. Pramanik, N.,;, Mohapatra, S.,;, Bhargava, P.,;, Pramanik, P., Mater Sci Eng 2009, C29, 228.
24. Wang, Y. W.,;, Wu, Q.,;, Chen, G. Q., Biomaterials 2004, 25, 669.
25. Bowers, K. T.,;, Keller, J. C.,;, Randolph, B. A.,;, Wick, D. G.,;, Michaels, C. M., Int J Oral Maxillofac Implants 1992, 7, 302.
26. Cochran, D.,;, Simpson, J.,;, Weber, H.,;, Buser, D., Int J Oral Maxillofac Implants 1994, 9, 289.