Corrosion analysis of reinforced geopolymer concretes

Concrc - Proceedings of Concrete Solutions, 4th International Conference on Concrete Repair

Volumn , Issue , 2012, Pages 267-277

  Kupwade Patil, K ^a   Allouche, E N ^a   Vaidya, S ^a   Diaz Loya, E I ^a  

^a LOUISIANA TECH UNIVERSITY   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

ACCELERATED CORROSION; BRACKISH WATER; CHLORIDE INDUCED CORROSION; CHLORIDE IONS; CHLORIDE LEVELS; CONCRETE MATRIX; CORROSION ANALYSIS; CORROSION BEHAVIOR; CORROSION POTENTIALS; CORROSION PRODUCTS; CORROSION STUDIES; DIFFUSION COEFFICIENTS; GEOPOLYMER CONCRETE; IMPRESSED CURRENT; MARINE ENVIRONMENT; ORDINARY PORTLAND CEMENT; OXYGEN CONCENTRATION CELLS; POLARIZATION RESISTANCES; STEEL REINFORCEMENT BARS;

CHLORINE COMPOUNDS; COMMERCE; CORROSIVE EFFECTS; ELECTRIC BATTERIES; ELECTROCHEMICAL CORROSION; ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY; FLY ASH; INORGANIC POLYMERS; LEACHING; REINFORCED CONCRETE; REINFORCEMENT;

CORROSION RATE;

EID: 84856682478     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (25)

1. ASTM G 3-89. 2010. Standard practice for conventions applicable to electrochemical measurements in corrosion testing, West Conshohocken, ASTM International.
2. ASTM G 102. 2010. Standard practice for calculation of corrosion rates and related information from electrochemical measurements, West Conshohocken, ASTM International.
3. ASTM G 109. 2010. Standard test method for determining the effects of chemical admixtures on the corrosion of embedded steel reinforcement in concrete exposed to chloride environments, West Conshohocken, ASTM International.
4. ASTM C 192. 2010. Standard practice for making and curing concrete test specimens in the laboratory, West Conshohocken, ASTM International.
5. ASTM C 876, Standard test method for half-cell potentials of uncoated reinforcing steel in concrete, West Conshohocken, ASTM International.
6. ASTM C 1202, 2010. Standard test method for electrical indication of concrete's ability to resist chloride ion penetration, West Conshohocken, ASTM International.
7. ASTM C 1156. 2010. Standard test method for determining the apparent chloride diffusion coefficient of cementitious mixtures by bulk diffusion, West Conshohocken, ASTM International.
8. Ahmad, Z. 2006. Principle of Corrosion Engineering and Corrosion Control, Netherlands, Butterworth-Heinemann.
9. Bentur, A. Diamond, S. and Berke, S. 1997. Steel Corrosion in Concrete, London, E & FN Spon.
10. Broomfield, J. 2007. Corrosion of Steel in Concrete, London, Taylor and Francis.
11. Chindaprasirt, P. Chareerat, T. Hatanaka, S. and Cao, T. 2011. High-strength geopolymer using fine high-calcium fly ash, ASCE Journal of Materials in Civil Engineering, Vol.23 (3) 264-270.
12. Davidovits, J. 2008. Geopolymer Chemistry and Applications, France, Institut Geopolymere.
13. Diaz, E.I, Allouche, E. and Eklund, S. 2010. Factors affecting the suitability of fly ash as a source material for geopolymers, Fuel, Vol. 89 (5) 992-996.
14. Diaz, E.I, Allouche, E. and Vaidya, S. 2011. Mechanical properties of fly-ash-based geopolymer concrete, ACI Materials Journal, Vol. 108 (3) 300-306.
15. Gu, P. Elliot, S. Hristova, R, Beaudoin, J. Brousseau, R. and Baldock, B. (1997). A study of corrosion inhibitor performance in chloride contaminated concrete by electrochemical impedance spectroscopy, ACI Materials Journal, Vol. 94 (46) 385-395. (Pubitemid 127554327)
16. Jones, D. 1995. Principle and Prevention of Corrosion, New Jersey, Prentice Hall.
17. Kupwade-Patil, 2010, Mitigation of chloride and sulfate based corrosion in reinforced concrete via electrokinetic nanoparticle treatment, Ph.D. thesis, Louisiana Tech University, Ruston.
18. Kupwade-Patil, K and Allouche, E. Effect of Alkali Silica Reaction (ASR) in Geopolymer Concrete, World Coal Ash Conference, 9-12 May, 2011, Denver.
19. Kupwade-Patil, K. John, T.J. Mathew, B. Cardenas, H. and Hegab, H. Diffusion analysis of chloride in concrete following electrokinetic nanoparticle treatment, Proc. of ASME. International Conference on Nanochannels, Microchannel and Minichannels, 2-4 August, 2010, Montreal, Canada.
20. Mancio, M. Carlos, C. Zang, J. John, T.H. Monteiro, P. and Ali, A. (2008). Evaluation of concrete resistance of steel dowels used for concrete pavements, ASCE Journal of Materials in Civil Engineering, Vol. 20 (10) 650-658.
21. Orazem. M. and Tibollet. B. 2008. Electrochemical Impedance Spectroscopy, New Jersey, Wiley.
22. Provis, J.L. and van Deventer, J.S. 2009. Geopolymers: Structure, processing, properties and industrial applications, Boca Raton, CRC Press.
23. Rixom, R. and Mailvaganam, N. 2002. Chemical Admixture for Concrete, New York, Taylor and Francis.
24. Taylor, H.F.W. 1997. Cement Chemistry, London, Thomas Telford.
25. Zhang, Z. Monteiro, P and Morrison, H.F. (2001). Noninvasive surface measurements of corrosion impedance of reinforcing bar in concrete-Part. 1: Experimental results, ACI Materials Journal, Vol 89 (2) 116-125.