Standardization work for BEV and HEV applications: Critical appraisal of recent traction battery documents

Energies

Volumn 5, Issue 1, 2012, Pages 138-156

  Omar, Noshin ^a,b   Daowd, Mohamed ^a   Hegaz, Omar ^a   Mulder, Grietus ^c   Timmermans, Jean Marc ^a   Coosemans, Thierry ^a   Van den Bossche, Peter ^b   Van Mierlo, Joeri ^a  

^a VRIJE UNIVERSITEIT BRUSSEL   (Belgium)

^b Erasmus University College   (Belgium)

^c FLEMISH INSTITUTE FOR TECHNOLOGICAL RESEARCH VITO   (Belgium)

Author keywords

Energy density; HPPC test; Lithium batteries; Performance tests; Power density

Indexed keywords

BATTERY ELECTRIC VEHICLES; ELECTRIC BATTERIES; ELECTRIC DISCHARGES; LIFE CYCLE; LITHIUM; LITHIUM ALLOYS; LITHIUM BATTERIES; LITHIUM COMPOUNDS; LITHIUM-ION BATTERIES; SECONDARY BATTERIES; STANDARDIZATION; TESTING;

CHARGE AND DISCHARGE; DEPTH OF DISCHARGES; ENERGY DENSITY; HPPC TESTS; HYBRID ELECTRIC VEHICLES (HEVS); PERFORMANCE TESTS; POWER DENSITIES; POWER PERFORMANCE;

HYBRID VEHICLES;

EID: 84856526475     PISSN: None     EISSN: 19961073     Source Type: Journal    
DOI: 10.3390/en5010138     Document Type: Article

References (34)

1. Emadi, A.; Rajashekara, K.; Williamson, S.S.; Lukic, S.M. Topological overview of hybrid electric and fuel cell vehicular power system architectures and configurations. IEEE Trans. Veh. Technol. 2005, 54, 763-770.
2. Cooper, A.; Furakawa, J.; Lam, L.; Kellaway, M. The ultrabattery-A new battery design for a new beginning in hybrid electric vehicle energy storage. J. Power Sources 2009, 188, 642-649.
3. Van den Bossche, P.; Vergels, F.; van Mierlo, J.; Matheys, J.; van Autenboer, W. SUBAT: An assessment of sustainable battery technology. J. Power Sources 2005, 162, 913-919.
4. Axsen, J.; Burke, A.; Kurani, K. Batteries for Plug-in Hybrid Electric Vehicles (PHEVs): Goals and the State of Technology Circa 2008; Research Report; Institute of Transportation Studies, University of California, Davis: Davis, CA, USA, 2008.
5. Van Mierlo, J.; Maggetto, G.; van den Bossche, P. Models of energy sources for EV and HEV: Fuel cells, batteries, ultra-capacitors, flywheels and engine-generators. J. Power Sources 2004, 28, 76-89.
6. Omar, N.; Verbrugge, B.; Mulder, G.; van den Bossche, P.; van Mierlo, J.; Daowd, M.; Dhaens, M.; Pauwels, S. Evaluation of Performance Characterisics of Various Lithium-Ion Batteries for Use in BEV Application. In Proceedings of the IEEE Vehicle Power and Propulsion Conference, Lille, France, 1-3 September, 2010.
7. Omar, N.; Daowd, M.; Verbrugge, B.; Mulder, G.; van den Bossche, P.; van Mierlo, J.; Dhaens, M.; Pauwels, S.; Leemans, F. Assessment of Performance Characteristics of Lithium-Ion Batteries for PHEV Vehicles Applications Based on a Newly Test Methodology. In Proceedings of the 25th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Shenzhen, China, 5-9 November 2010.
8. Burke, A.F. Batteries and ultracapacitors for electric, hybrid, and fuel cell vehicles. Proc. IEEE 2007, 95, 806-820.
9. Burke, A.; Miller, M. Performance Characteristics of Lithium-ion Batteries of Various Chemistries for Plug-in Hybrid Vehicles. In Proceedings of the 24th World Battery, Hybrid and Fuel Cell Electric Vehicle Symposium, Stavanger, Norway, 13-16 May 2009.
10. Onda, K.; Ohshima, T.; Nakayama, M.; Fukuda, K.; Araki, T. Thermal behaviour of small lithium-ion battery during rapid charge and discharge cycles. J. Power Sources 2006, 158, 535-542.
11. 12/polyacene materials for Li-ion secondary batteries. J. Electrochim. Acta 2008, 152, 4200-4204.
12. Liaw, B.Y.; Nagasubramanian, G.; Jungst, R.G.; Doughty, D.H. Modeling of lithium ipon cells-A simple equivalent-circuit model approach. J. Solid State Ion. 2004, 175, 835-839.
13. Wu, M.; Liu, K.H.; Wang, Y.; Wan, C. Heat dissipation design for lithium-ion batteries. J. Power Sources 2002, 109, 160-166.
14. 2. J. Electrochim. Acta 2006, 51, 1651-1655.
15. Johnson, B.A.; White, R.E. Characterization of commercially available lithium-ion batteries. J. Power Sources 1998, 70, 48-54.
16. Meekhun, D.; Boitier, V.; Dilhac, J. Study of the Ambient Temperature Effect on the Characteristics and the Lifetime of Nickel-Metal Hybride Secondary Battery. In Proceedings of the Electrical Power & Energy Conference, Montreal, Canada, 22-23 October 2009.
17. 4-based lithium ion secondary batteries. J. Power Sources 2011, 196, 331-336.
18. 4-based Li-ion batteries by vinylene carbonate as electrolyte additive. J. Electrochem. Solid State Lett. 2006, 9, A537-A541.
19. Tikhonov, K.; Koch, V.R. Li-Ion Battery Electrolytes Designed for a Wide Temperature Range; Technical Report; Covalent Associates, Inc.: Woburn, MA, USA, 2006.
20. Andre, D.; Meiler, M.; Steiner, K.; Walz, H.; Soczka-Guth, T.; Uwe Sauer, D. Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: Modelling. J. Power Sources 2010, 196, 5334-5341.
21. Lee, S.; Kim, J.; Lee, J.; Cho, B.H. State-of-charge and capacity estimation of lithium-ion battery using a new open-circuit voltage versus state-of-charge. J. Power Sources 2008, 185, 1367-1373.
22. Dubary, M.; Svoboda, V.; Hwu, R.; Law, B.Y. A roadmap to understand battery performance in electric and hybrid vehicle operation. J. Power Sources 2007, 174, 366-372.
23. Hu, Y.; Yurkovich, S.; Guezennec, Y.; Yurkovich, B.J. Electro-thermal battery model identification for automotive applications. J. Power Sources 2011, 196, 449-457.
24. Hu, Y.; Yurkovich, S.; Guezennec, Y.; Yurkovich, B.J. A technique for dynamic battery model identification in automotive applications using linear parameter varying structures. J. Control Eng. Pract. 2009, 17, 1190-1201.
25. Thele, M.; Bohlen, O.; Uwe Sauer, D.; Karden, E. Development of a voltage-behavior model for NiMH batteries using an impedance-based modelling concept. J. Power Sources 2008, 175, 635-643.
26. ISO 12405-1: Electrically propelled road vehicles-Test specification for lithium-ion traction battery packs and systems-Part 1: High power applications, 2011. Available online: http://www.iso.org/iso/catalogue_detail?csnumber=51414 (accessed on 18 January 2012).
27. ISO 12405-2: Electrically propelled road vehicles-Test specification for lithium-ion traction battery packs and systems-Part 2: High energy applications, 2011. Available online: http://www.iso.org/iso/catalogue_detail?csnumber=55854 (accessed on 18 January 2012).
28. IEC 62660-1: Electrically propelled road vehicles-Test specification for lithium-ion traction battery packs and systems-Part 1: High power applications, 2011. Available online: http://webstore.iec.ch/Webstore/webstore.nsf/Artnum_PK/44728 (accessed on 18 January 2012).
29. IEC 62660-2: Secondary batteries for the propulsion of electric road vehicles-Part 2: Reliability and abuse testing for lithium-ion cells, 2011. Available online: http://webstore.iec.ch/Webstore/ webstore.nsf/Artnum_PK/44727 (accessed on 18 January 2012).
30. IEC 61982-2: Part 2: Dynamic discharge performance test and dynamic endurance test, August 2002. Available online: http://webstore.iec.ch/webstore/webstore.nsf/Artnum_PK/29145 (accessed on 18 January 2012).
31. IEC 61434: Secondary cells and batteries containing alkaline or other non-acid electrolytes- Guide to designation of current in alkaline secondary cell and battery standards, 1996. Available online: http://webstore.iec.ch/webstore/webstore.nsf/Artnum_PK/21274 (accessed on 18 January 2012).
32. Van den Bossche, P.; Verbrugge, B.; Omar, N.; van Mierlo, J. The Electric Vehicles charged by the Grid: Voltage and Power Levels. In Proceedings of the Plug-In Hybrids and Electric Vehicles (PHEV-09), Montreal, Canada, 28-30 September 2009.
33. FreedomCAR Battery Test Manual for Power Assist Hybrid Electric Vehicles; U.S. Department of Energy: Washington, DC, USA, 2003.
34. Kharkats, Y.I.; Sokirko, A.V.; Bark, F.H. Properties of polarization curves for electrochemical cells described by Butler-Volmer kinetics and arbitrary values of the transfer coefficient. Electrochimica Acta 1995, 40, 247-252.