Electropolymerization of 3,4-ethylenedioxythiophene within an insulating nitrile butadiene rubber network: Application to electroreflective surfaces and devices

Solar Energy Materials and Solar Cells

Volumn 99, Issue , 2012, Pages 109-115

  Fabre Francke, Isabelle ^a   Aubert, Pierre Henri ^a   Alfonsi, Séverine ^a   Vidal, Frédéric ^a   Sauques, Laurent ^b   Chevrot, Claude ^a  

^a UNIVERSITÉ DE CERGY PONTOISE   (France)

^b Délégation Générale Pour LArmement CEP LOT   (France)

Author keywords

Electropolymerization; Interpenetrating Polymer Network; Nitrile Butadiene Rubber; poly(3,4 ethylenedioxythiophene); Polyethylene oxide; Reflective device

Indexed keywords

3 ,4-ETHYLENEDIOXYTHIOPHENE; BRANCHED POLYETHYLENES; CHEMICAL OXIDATION; CONDUCTIVE POLYMER; CYCLIC VOLTAMOGRAMS; ELECTROCHEMICAL CHARACTERIZATIONS; ELECTROCHEMICAL ROUTES; ELECTROLYTIC MEDIUM; INNOVATIVE DESIGN; INSULATING MATRIX; INTERPENETRATING POLYMERS; MATRIX; MIDDLE INFRARED; MIXED CONDUCTIVITY; NEAR INFRA RED; NITRILE BUTADIENE RUBBER; OXIDATIVE CHEMICALS; POLY(3 ,4-ETHYLENEDIOXYTHIOPHENE); POLYMER NETWORKS; REFLECTIVE DEVICES; REFLECTIVE PROPERTIES; SEMI-IPN; SYSTEM-BASED;

ADHESION; BUTADIENE; CYANIDES; DESIGN; ELECTROPOLYMERIZATION; INFRARED DEVICES; INTERPENETRATING POLYMER NETWORKS; MECHANICAL PROPERTIES; OPTICAL PROPERTIES; POLYETHYLENE OXIDES; POLYETHYLENES; RUBBER; SCANNING ELECTRON MICROSCOPY; SEMICONDUCTOR DOPING; THERMOPLASTICS;

POLYMERS;

EID: 84856522996     PISSN: 09270248     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.solmat.2011.07.004     Document Type: Article

References (35)

1. T.A. Skotheim, R.L. Elsenbaumer, and J.R. Reynolds Handbook of Conducting Polymers 3rd ed. 2007 Marcel Dekker New York
2. C. Trimble, M. DeVries, J.S. Hale, D.W. Thompson, T.E. Tiwald, and J.A. Woolam Infrared emittance modulation devices using electrochromic crystalline tungsten oxide, polymer conductor, and nickel oxide Thin Solid Films 355356 1999 26 34 (Pubitemid 30523170)
3. M.G. Hutchins, N.S. Butt, A.J. Topping, J. Gallego, P. Milne, D. Jeffrey, and I. Brotherston Infrared reflectance modulation in tungsten oxide based electrochromic devices Electrochim. Acta 46 2001 1983 1988 (Pubitemid 32331167)
4. A. Beissière, C. Marcel, M. Morcrette, J.M. Tarascon, V. Lucas, B. Viana, and N.J. Baffier Flexible electrochromic reflectance device base don tungsten oxide for infrared emissivity control Appl. Phys, 91 2002 1589 1594
5. C.G. Granqvist Electrochromic devices J. Eur. Ceram. Soc. 25 2005 2907 2912 (Pubitemid 40829743)
6. P.M. Beaujuge, and J.R. Reynolds Color control in π - conjugated organic polymers for use in electrochromic devices Chem. Rev. 110 1 2010 268 320
7. P.H. Aubert, A. Argun, A. Cirpan, D.B. Tanner, and J.R. Reynolds Microporous patterned electrodes for color-matched electrochromic polymer displays Chem. Mater. 16 2004 2386 2393
8. A.L. Dyer, C.R. Grenier, and J.R. Reynolds A. poly(34- alkylenedioxythiophene) electrochromic variable omptical attenuator with near-infrared reflectivity tuned independently of the visible region Adv. Funct. Mater. 17 9 2007 1480 1486 (Pubitemid 46984706)
9. P. Chandrasekhar Proc. SPIE 169 1995 2528
10. H. Pagès, P. Topart, and D. Lemordant Wide band electrochromic displays based on thin conducting polymer films Electrochim. Acta 46 2001 2137 2143 (Pubitemid 32331188)
11. I. Schwendeman, J. Hwang, D.M. Welsh, D.B. Tanner, and J.R. Reynolds Combined visible and infrared electrochromism using dual polymer devices Adv. Mater. 13 9 2001 634 637 (Pubitemid 32486004)
12. F. Tran-Van, L. Beouch, F. Vidal, P. Yammine, D. Teyssié, and C. Chevrot Self-supported semi-interpenetrating polymer networks for new design of electrochromic devices Electrochim. Acta 53 2008 4336 4343
13. P. Verge, M. Mallouki, L. Beouch, P.H. Aubert, F. Vidal, F. Tran-Van, D. Teyssie, and C. Chevrot Electroactive polymers with semi-IPN architectures for electrochromic devices Mol. Cryst. Liq. Cryst. 522 2010 53 60
14. P. Verge, P.H. Aubert, F. Vidal, L. Sauques, F. Tran-Van, S. Peralta, D. Teyssié, and C. Chevrot New prospects in the conception of IR electro-tunable devices: the use of conducting semi-interpenetrating polymer network architecture Chem. Mater. 22 2010 4539 4547
15. L.H. Sperling, D. Klemper, and L.A. Utracki Interpenetrating Polymer Networks 1991 American Chemical Society Washington
16. F. Vidal, C. Plesse, D. Teyssié, and C. Chevrot Long-life air working conducting semi-IPN/ionic liquid based actuator Synth. Met. 142 2004 287 291
17. C. Plesse, F. Vidal, H. Randriamahazaka, D. Teyssié, and C. Chevrot Synthesis and characterization of conducting interpenetrating polymer networks for new actuators Polymer 46 2005 7771 7778 (Pubitemid 41125238)
18. F. Vidal, C. Plesse, H. Randriamahazaka, D. Teyssié, and C. Chevrot Long-life air working semi-IPN/ionic liquid: new precursor of artificial muscles Mol. Cryst. Liq. Cryst. 448 2006 95 102
19. F. Vidal, C. Plesse, G. Palaprat, A. Kheddar, J. Citerin, D. Teyssié, and C. Chevrot Conducting IPN actuators: from polymer chemistry to actuator with linear actuation Synth. Met. 156 2006 1299 1304 (Pubitemid 46186821)
20. S.-W. Oh, H.W. Rhee, Y.C. Kim, J.K. Kim, and J.-W. Yu Network structure organic photovoltaic device Curr. Appl. Phys. 6 4 2006 739 742 (Pubitemid 43825851)
21. T.X. Lav, F. Tran-Van, F. Vidal, S. Peralta, C. Chevrot, D. Teyssié, J.V. Grazulevicius, V. Getautis, H. Derbal, and J.-M. Nunzi Synthesis and characterization of p and n dopable interpenetrating polymer networks for organic photovoltaic devices Thin Solid Films 516 2008 7223 7229
22. M. Cho, H. Seo, J. Nam, H. Shoi, J. Koo, and Y. Lee High ionic conductivity and mechanical strength of solid polymer electrolytes based on NBR/ionic liquid and its application to an electrochemical actuator Sensors Actuators B 128 2007 70 74 (Pubitemid 350051792)
23. A. Ciesielsky An Introduction to Rubber Technology 1999 Smithers Rapra Technology Limited London, UK p. 112 (Chapter 6)
24. F. Jonas, and L. Schrader Conductive modifications of polymers with polypyrroles and polythiophenes Synth. Met. 41 1991 831 836 (Pubitemid 21696753)
25. L. Groenendaal, F. Jonas, D. Freitag, H. Pielartzik, and J.R. Reynolds Poly(3,4-ethylenedioxythiophene) and its derivatives: past, present, and future Adv. Mater. 12 2000 481 494
26. L. Groenendaal, G. Zotti, P.H. Aubert, S.M. Waybright, and J.R. Reynolds Electrochemistry of poly(3,4-alkylenedioxythiophene) derivatives Adv. Mater. 15 2003 855 879
27. R. Aparecida Zoppi, and M.A. De Paoli Synthesis and characterization of a composite containing poly(3-methylthiophene) and nitrilic rubber Polymer 33 21 1992 4611 4616
28. E.L. Tassi, and M.A. De Paoli An electroactive elastomer: polyaniline/nitrile rubber Polymer 33 11 1992 2427 2430
29. N. Girault, P. Aldebert, M. Pinerip, and P. Audebert Physicochemical characterization of mixed conducting composites obtained by electropolymerization of pyrrole into perfluoronated ionomer gels Synth. Met. 38 1990 277 291
30. B. Winther-Jensen, and K. West Interpenetrating networks of two conducting polymers Synth. Met. 148 2005 105 109 (Pubitemid 41541805)
31. R. Gangopadhyay, and A. De An electrochemically synthesized conducting semi-IPN from polypyrrole and poly(vinyl alcohol) J. Mater. Chem. 12 2002 3591 3598
32. L.J. Goujon, A. Khaldi, A. Maziz, C. Plesse, G.T.M. Nguyen, P.H. Aubert, F. Vidal, C. Chevrot, D. Teyssié, Flexible solid polymer electrolytes based on nitrile butadiene rubber/poly(ethylene oxide) interpenetrating polymer networks, Macromolecules, submitted for publication.
33. G. Gritzner, and G.J. Kuta Recommendations on reporting electrode potentials in nonaqueous silvents (Recommendations 1983) Pure Appl. Chem. 56 1984 461 466 (Pubitemid 14565316)
34. 4- based Cu nano-architectured electrodes for lithium-ion battery applications Nature Materials 5 2006 567 573 (Pubitemid 43996781)
35. K. Lee, and A.J. Heeger Optical reflectance studies of conducting polymers on the metalinsulator boundary Synth. Met. 84 1997 715 718 (Pubitemid 127401569)