An Overview of Modeling Cement Based Materials at Elevated Temperatures with Mechanics of Multi-Phase Porous Media

Fire Technology

Volumn 48, Issue 3, 2012, Pages 753-793

  Gawin, Dariusz ^a   Pesavento, Francesco ^b  

^a LODZ UNIVERSITY OF TECHNOLOGY   (Poland)

^b UNIVERSITY OF PADOVA   (Italy)

Author keywords

Cement based materials; Computer simulation; High temperature; Mathematical model; Poro mechanics of multi phase media

Indexed keywords

CEMENT BASED MATERIAL; CONCRETE ELEMENTS; COOLING PHASE; ELEVATED TEMPERATURE; EXPERIMENTAL STUDIES; FIRE CONDITION; HIGH TEMPERATURE; LINEAR MOMENTA; MICRO-SCALES; MODEL APPLICATION; MODEL EQUATIONS; NUMERICAL SOLUTION; PHYSICAL PHENOMENA; PORO-MECHANICS;

CEMENTS; COMPUTER SIMULATION; MECHANICS; NUMERICAL METHODS; POROUS MATERIALS; STRENGTH OF MATERIALS;

MATHEMATICAL MODELS;

EID: 84856209478     PISSN: 00152684     EISSN: None     Source Type: Journal    
DOI: 10.1007/s10694-011-0216-y     Document Type: Article

References (50)

1. Bazant Z. P., Thonguthai W. (1978) Pore pressure and drying of concrete at high temperature. J. Engng. Mech. Div. ASCE. 104: 1059-1079.
2. Bazant Z. P., Thonguthai W. (1979) Pore pressure in heated concrete walls: theoretical prediction. Mag. of Concr. Res. 31(107): 67-76.
3. England G. L., Khoylou N. (1995) Moisture flow in concrete under steady state non-uniform temperature states: experimental observations and theoretical modelling, Nucl. Eng. Des. 156: 83-107.
4. Phan LT, Carino NJ, Duthinh D, Garboczi E (Eds) (1997) Proceedings on international workshop on fire performance of high-strength concrete. NIST Special Publication 919, Gaitherburg (MD), USA.
5. Bazant Z. P., Kaplan M. F. (1996) Concrete at High Temperatures: Material Properties and Mathematical Models. Longman, Harlow.
6. Consolazio G. R., McVay M. C., Rish III. J. W. (1998) Measurement and prediction of pore pressures in saturated cement mortar subjected to radiant heating. ACI Mater. J. 95 (5): 526-536.
7. Ulm F.-J., Coussy O., Bazant Z. (1999) The "Chunnel" fire. I. Chemoplastic softening in rapidly heated concrete, J. Eng. Mech. ASCE 125(3): 272-282.
8. Ulm F.-J., Acker P., Levy M. (1999) The "Chunnel" fire. II. Analysis of concrete damage, J. Eng. Mech. ASCE 125(3): 283-289.
9. Gawin D., Majorana C. E., Schrefler B. A. (1999) Numerical analysis of hygro-thermic behaviour and damage of concrete at high temperature. Mechanics of Cohesive-Frictional Materials 4: 37-74.
10. Gawin D., Pesavento F., Schrefler B. A. (2002) Simulation of damage-permeability coupling in hygro-thermo-mechanical analysis of concrete at high temperature. Communications in Numerical Methods in Engineering 18 (2), 113-119.
11. Gawin D., Pesavento F., Schrefler B. A. (2002) Modelling of hygro-thermal behaviour and damage of concrete at temperature above critical point of water. International Journal of Numerical and Analytical Methods in Geomechanics 26 (6): 537-562.
12. Gawin D., Pesavento F., Schrefler B. A. (2003) Modelling of thermo-chemical and mechanical damage of concrete at high temperature. Computer Methods in Applied Mechanics and Engineering 192: 1731-1771.
13. Gawin D., Alonso C., Andrade C., Majorana C. E., Pesavento F. (2005a) Effect of damage on permeability and hygro-thermal behaviour of HPCs at elevated temperatures, Part 1. Experimental results. Computers and Concrete 2 (3): 189-202.
14. Gawin D., Majorana C. E., Pesavento F., Schrefler B. A. (2005) Effect of damage on permeability and hygro-thermal behaviour of HPCs at elevated temperatures, Part 2. Numerical analysis, Computers and Concrete 2 (3): 203-214.
15. Gawin D., Pesavento F., Schrefler B. A. (2006) Towards prediction of the thermal spalling risk through a multi-phase porous media model of concrete. Computer Methods in Applied Mechanics and Engineering 195 (41-43): 5707-5729.
16. Gawin D., Pesavento F., Schrefler B. A. (2004) Modelling of deformations of high strength concrete at elevated temperatures, Materials and Structures 37(268): 218-236.
17. Tenchev R. T., Li L. Y., Purkiss J. A. (2001) Finite element analysis of coupled heat and moisture transfer in concrete subjected to fire. Num. Heat Transfer, Part A: Appl. 39 (7): 685-710.
18. Tenchev R., Purnell P. (2005) An application of a damage constitutive model to concrete at high temperature and prediction of spalling, Int. J. Solids Struct. 42 (26): 6550-6565.
19. Ichikawa Y, England G. L. (2004) Prediction of moisture migration and pore pressure build-up in concrete at high temperatures. Nucl Eng Des 228(1-3): 245-259.
20. Davie C. T., Pearce C. J., Bicanic N. (2006) Coupled Heat and Moisture Transport in Concrete at Elevated Temperatures-Effects of Capillary Pressure and Adsorbed Water. Numerical Heat Transfer 49(8): 733-763.
21. Chung J. H., Consolazio G. R., McVay M. C. (2006) Finite element stress analysis of a reinforced high-strength concrete column in severe fires. Computers and Structures 84(21): 1338-1352.
22. Witek A., Gawin D., Pesavento F., Schrefler B. A. (2007) Finite element analysis of various methods for protection of concrete structures against spalling during fire, Comp. Mech. 39 (3): 271-292.
23. Dwaikat M. B., Kodur V. K. R. (2009) Hydrothermal model for predicting fire-induced spalling in concrete structural systems. Fire Safety Journal 44: 425-434.
24. Schrefler B. A., Brunello P., Gawin D., Majorana C. E., Pesavento F. (2002) Concrete at high temperature with application to tunnel fire. Computational Mechanics 29: 43-51.
25. Gawin D, Pesavento F, Schrefler BA (accepted) Comparative study of concrete performance at high temperature with the reference and simplified mathematical models. Part 1: physical phenomena and mathematical model. Int J Solids Struct.
26. Hassanizadeh S. M., Gray W. G. (1979a) General Conservation Equations for Multi-Phase Systems: 1. Averaging Procedure. Adv. Water Resources 2: 131-144.
27. Hassanizadeh S. M., Gray W. G. (1979b) General Conservation Equations for Multi-Phase Systems: 2. Mass, Momenta, Energy and Entropy Equations. Adv. Water Resources 2: 191-203.
28. Hassanizadeh S. M., Gray W. G. (1980) General Conservation Equations for Multi-Phase Systems: 3. Constitutive Theory for Porous Media Flow, Adv. Water Resources 3: 25-40.
29. Lewis R. W., Schrefler B. A. (1998) The Finite Element Method in the Static and Dynamic Deformation and Consolidation of Porous Media. second ed. John Wiley & Sons, Chichester.
30. Schrefler B. A. (2002) Mechanics and Thermodynamics of Saturated-Unsaturated Porous Materials and Quantitative Solutions, Applied Mechanics Review 55 (4): 351-388.
31. Khoury G. A., Majorana C. E., Pesavento F., Schrefler B. A. (2002) Modelling of heated concrete. Mag Concrete Res 54(2): 77-101.
32. Kalifa P., Menneteau, F. D., Quenard D. (2000) Spalling and pore pressure in HPC at high temperatures. Cement and Concrete Research 30: 1915-1927.
33. Schneider U. (1988) Concrete at high temperatures-a general review. Fire Safety Journal 13(1): 55-68.
34. Gawin D (2000) Modelling of coupled hygro-thermal phenomena in building materials and building components (Habilitation thesis, in Polish), Scientific Bulletin of Technical University of Lodz 853, Editions of Technical University of Lodz, Lodz.
35. Pesavento F (2000) Non-linear modeling of concrete as multiphase porous material in high temperature conditions. PhD thesis, University of Padova, Padova.
36. Gray WG, Schrefler BA, Pesavento F (2009) The solid phase stress tensor in porous media mechanics and the Hill-Mandel condition. J Mech Phys Solids 57: 539-554.
37. Gawin D., Schrefler B. A. (1996) Thermo-hydro-mechanical analysis of partially saturated porous materials. Engineering Computations 13(7): 113-143.
38. Gray W. G., Schrefler B. A. (2007) Analysis of the solid phase stress tensor in multiphase porous media. Int. J. Numer. Anal. Meth. Geomech. 31(4): 541-581.
39. Aitkins, P., de Paula, J. (2002) Aitkins' Physical Chemistry, seventh ed. Oxford University Press Inc., New York.
40. ASHRAE (1993) ASHRAE handbook. Fundamentals, Atlanta.
41. Pesavento F., Gawin D., Schrefler B. A. (2008) Modeling cementitious materials as multiphase porous media: theoretical framework and applications, Acta Mechanica 201(1-4): 313-339.
42. Mazars J., Pijaudier-Cabot J. (1989) Continuum damage theory - application to concrete. Journal of Eng. Mechanics ASCE 115(2): 345-365.
43. Nechnech W, Reynouard JM, Meftah F (2001) On modelling of thermo-mechanical concrete for the finite element analysis of structures submitted to elevated temperatures. In: de Borst R, Mazars J, Pijaudier-Cabot G, van Mier JGM (eds) Fracture mechanics of concrete structures, Swets & Zeitlinger, Lisse, pp 271-278.
44. Khoury G. A. (1995) Strain components of nuclear-reactor-type concretes during first heating cycle. Nuclear Engineering and Design 156: 313-321.
45. Khoury G. A., Grainger B. N., Sullivan P. J. E. (1985) Transient thermal strain of concrete: literature review, conditions within specimens and behaviour of individual constituents. Mag. Concrete Research 37(132): 131-144.
46. Thelandersson S. (1987) Modeling of combined thermal and mechanical action on concrete, J. Engng Mech, ASCE 113(6): 893-906.
47. Zienkiewicz O. C., Taylor R. L. (2000) The Finite Element Method, vol. 1: The Basis. Butterworth-Heinemann, Oxford.
48. Eurocode 1 (2002) Part 1-2. Actions on structures. General actions. Actions on structures exposed to fire. BS EN 1991-1-2: 2002.
49. UPTUN. Cost-effective sustainable and innovative UPgrading methods for fire safety in existing TUNnels, www. uptun. net.
50. Brite Euram III BRPR-CT95-0065 HITECO (1999) Understanding and industrial application of high performance concrete in high temperature environment-final report.