3-D formal resolution of maxwell equations for the computation of the no-load flux in an axial flux permanent-magnet synchronous machine

IEEE Transactions on Magnetics

Volumn 48, Issue 1, 2012, Pages 128-136

  De La Barriere O ^a   Hlioui, S ^a   Ben Ahmed, H ^a   Gabsi, M ^a   LoBue, M ^a  

^a Centre National de la Recherche Scientifique   (France)

Author keywords

3 D analytical models; 3 D finite element; Axial flux machines; curvature effects; edge effects; formal resolution of Maxwell's equations

Indexed keywords

ANALYTICAL MODEL; AXIAL FLUX MACHINES; CURVATURE EFFECTS; EDGE EFFECTS; FINITE ELEMENT; FORMAL RESOLUTION OF MAXWELL'S EQUATIONS;

ELECTROMAGNETISM; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; MAXWELL EQUATIONS; MODELS; PERMANENT MAGNETS; SYNCHRONOUS MACHINERY;

THREE DIMENSIONAL;

EID: 84855473470     PISSN: 00189464     EISSN: None     Source Type: Journal    
DOI: 10.1109/TMAG.2011.2167347     Document Type: Article

References (26)

1. J. F. Eastham et al., "Novel axial flux machine for aircraft drive: Design and modeling," IEEE Trans. Magn., vol. 38, no. 5, pp. 3003-3005, Sep. 2002. (Pubitemid 35444686)
2. P. Brooking and J. R. Bumby, "An integrated engine-generator set with power electronic interface for hybrid electric vehicle applications brooking," in Int. Conf. Power Electronics Machines and Drives, 2002, pp. 153-158. (Pubitemid 35004564)
3. M. Andriollo, M. De Bortoli, G. Martinelli, A. Morini, and A. Tortella, "Permanent magnet axial flux disc generator for small wind turbines," in Int. Conf. Electrical Machines, 2008, pp. 1-6.
4. R. J. Wang, M. J. Kamper, K. Van der Westhuizen, and J. F. Gieras, "Optimal design of a coreless stator axial flux permanent-magnet generator," IEEE Trans. Magn., vol. 41, no. 1, pp. 55-64, Jan. 2005. (Pubitemid 40136356)
5. S. Brisset, D. Vizireanu, and P. Brochet, "Design and optimization of a nine-phase axial-flux PM synchronous generator with concentrated winding for direct-drive wind turbine," IEEE Trans. Ind. Appl., vol. 44, no. 3, pp. 707-715, 2008. (Pubitemid 351796117)
6. T. F. Chan and L. L. Lai, "An axial-flux permanent-magnet synchronous generator for a direct-coupledwind-turbine system," IEEE Trans. Energy Convers., vol. 22, no. 1, pp. 86-94, 2007. (Pubitemid 46487480)
7. A. Cavagnino, M. Lazzari, F. Profumo, and A. Tenconi, "A comparison between the axial flux and the radial flux structures forPM synchronous motors," IEEE Trans. Ind. Appl., vol. 36, no. 6, pp. 1517-1524, 2002.
8. S. Javadi and M. Mirsalim, "A coreless axial-flux permanent-magnet generator for automotive applications," IEEE Trans. Magn., vol. 44, no. 12, pp. 4591-4598, Dec. 2008.
9. S. Javadi and M. Mirsalim, "Design and analysis of 42-V coreless axial-flux permanent-magnet generators for automotive applications," IEEE Trans. Magn., vol. 46, no. 4, pp. 1015-1023, Apr. 2010.
10. J. Fontchastagner, Y. Lefevre, and F. Messine, "Some co-axial magnetic couplings designed using an analytical model and an exact global optimization code," IEEE Trans. Magn., vol. 45, no. 3, pp. 1458-1461, Mar. 2009.
11. L. De Liao et al., "A miniaturized electromagnetic generator with planar coils and its energy harvest circuit," IEEE Trans. Magn., vol. 45, no. 10, pp. 4621-4627, Oct. 2009.
12. J. R. Bumby et al., "Electromagnetic design of axial-flux permanent magnet machines," in IEE Proc. Electrical Power Applications, 2004, vol. 151, no. 2, pp. 151-160.
13. Z. Q. Zhu and D. Howe, "Prediction of open-circuit airgap field distribution in brushless machines having an inset permanent magnet rotor topology," IEEE Trans. Magn., vol. 30, no. 1, pp. 98-107, Jan. 1994.
14. Z. Q. Zhu, L. J. Wu, and Z. P. Xia, "An accurate subdomain model for magnetic field computation in slotted surface-mounted permanentmagnet machines," IEEE Trans. Magn., vol. 46, no. 4, pp. 1100-1115, Apr. 2010.
15. A. Bellara, Y. Amara, G. Barakat, and B. Dakyo, "Two-dimensional exact analytical solution of armature reaction field in slotted surface mounted PM radial flux synchronous machines," IEEE Trans. Magn., vol. 45, no. 10, pp. 4534-4538, Oct. 2009.
16. P. Virtic, P. Pisek, M. Hadziselimovic, T. Marcic, and B. Stumberger, "Torque analysis of an axial flux permanent magnet synchronous machine by using analytical magnetic field calculation," IEEE Trans. Magn., vol. 45, no. 3, pp. 1036-1039, Mar. 2009.
17. J. Azzouzi, G. Barakat, and B. Dakyo, "Quasi-3-D analytical modelling of the magnetic field of an axial flux permanent-magnet synchronous machine," IEEE Trans. Energy Convers., vol. 20, no. 4, pp. 746-752, 2005. (Pubitemid 41830050)
18. F. Marignetti, G. Tomassi, and J. Bumby, "Electromagnetic modelling of permanent magnet axial flux motors and generators," Compel, vol. 25, no. 2, pp. 510-522, 2006.
19. M. Aydin, Z. Q. Zhu, T. A. Lipo, and D. Howe, "Minimization of cogging torque in axial-flux permanent-magnet machines: Design concepts," IEEE Trans. Magn., vol. 43, no. 9, pp. 3614-3622, Sep. 2007. (Pubitemid 47294992)
20. O. de la Barrière, S. Hlioui, H. Ben Ahmed, M. Gabsi, and M. LoBue, "3D analytical modeling of a permanent-magnet linear actuator with circular magnets," IEEE Trans. Magn., vol. 46, no. 9, pp. 3608-3616, Sep. 2010.
21. R. Ravaud, G. Lemarquand, and V. Lemarquand, "Magnetic field created by tile permanent magnets," IEEE Trans. Magn., vol. 45, no. 7, pp. 2920-2926, Jul. 2009.
22. J. Jennane, N. Fadli, J. Charpentier, and J. Quesada, "Semi-analytical study of 3 kinds of axial flux PM actuator," Int. J. Appl. Electromagn. Mech., vol. 19, no. 1, pp. 299-302, 2004.
23. M. Aydin, S. Huang, and T. Lipo, "Axial flux permanent magnet disc machines: A review," in Symp. Power Electronics, Electrical Drives, Automation, and Motion (SPEEDAM), 2004, pp. 61-71.
24. S. Morimoto, Y. Takeda, T. Hirasa, and K. Taniguchi, "Expansion of operating limits for permanent magnet motor by current vector control considering inverter capacity," IEEE Trans. Ind. Appl., vol. 26, pp. 866-871, 2000.
25. F. W. Carter, "Note on air-gap and interpolar induction," J. Proc. Inst. Elect. Eng., vol. 29, pp. 923-933, 1900.
26. G. N. Watson, A Treatise on the Theory of Bessel. Cambridge, U.K.: Cambridge University Press, 1922.