Impact strength improvement of wood flour-recycled polypropylene composites

Journal of Applied Polymer Science

Volumn 124, Issue 2, 2012, Pages 1074-1080

  Ghahri, Saman ^a   Najafi, Saeed Kazemi ^a   Mohebby, Behbood ^a   Tajvidi, Mehdi ^b  

^a TARBIAT MODARES UNIVERSITY   (Iran)

^b UNIVERSITY OF TEHRAN   (Iran)

Author keywords

extrusion; mechanical properties; recycling

Indexed keywords

CONTROLLED CONDITIONS; COUNTER ROTATING; ETHYLENE VINYL ACETATES; IMPACT MODIFICATION; POLYPROPYLENE COMPOSITE; ROTOR SPEED; TWIN SCREW EXTRUDERS; WOOD FLOUR;

ETHYLENE; EXTRUSION; MECHANICAL PROPERTIES; POLYPROPYLENES; RECYCLING; SCREWS; THERMOPLASTICS; WOOD PRODUCTS;

IMPACT STRENGTH;

COMPOSITES; EXTRUDERS; IMPACT STRENGTH; POLYPROPYLENE; RECYCLED CONTENT; SCREWS; TEMPERATURE; THERMOPLASTICS; WOOD FLOUR;

EID: 84855352185     PISSN: 00218995     EISSN: 10974628     Source Type: Journal    
DOI: 10.1002/app.34015     Document Type: Article

References (46)

1. Youngquist, J. A.,;, Myers, G. E.,;, Muehl, J. H.,;, Krzysik, A. M.,;, Clemens, C. M., Composites from Recycled Wood and Plastics; USDA Forest Service, Forest Product Laboratory: Madison, WI, 1994.
2. Kamdem, D. P.,;, Jiang, H.,;, Cui, W.,;, Freed, J.,;, Matuana, L. M., Compos A 2004, 35, 347.
3. Kazemi Najafi, S.,;, Hamidinia, E.,;, Tajvidi, M., J Appl Polym Sci 2006, 100, 364.
4. Rust, N.,;, Ferg, E. E.,;, Masalova, I., A Polym Test 2006, 25, 130.
5. Gonzalez-Gonzalez, V. A.,;, Neira-Velazquez, G.,;, Angulo-Sanchez, J. L., Polym Degrad Stab 1998, 60, 33.
6. Canevarolo, S. V., Polym Degrad Stab 2000, 79, 71.
7. Jansson, A.,;, Moller, K.,;, Gevert, T., Polym Degrad Stab 2003, 82, 37.
8. Da Costa, H. M.,;, Ramos, V. D.,;, De Oliveira, M. G., Polymer Test 2007, 26, 674.
9. Tochacek, J.,;, Jancar, J.,;, Kalfus, J.,;, Zborilova, P.,;, Buran, Z., Polym Degrad Stab 2008, 93, 770.
10. Sheng, B. R.,;, Li, B.,;, Xie, B. H.,;, Yang, W.,;, Feng, J. M.,;, Yang, M. B., Polym Degrad Stab 2008, 93, 225.
11. Selke, S. E.,;, Wichman, I., Compos A 2004, 35, 321.
12. Adhikary, K. B.,;, Pang, S. H.,;, Staiger, M. P., Compos B 2008, 39, 807.
13. Mali, J.,;, Sarsama, P.,;, Lindberg, L. S.,;, Peltonen, J.,;, Vilkki, M.,;, Koto, T.,;, Tiisala, S., Wood Fiber Plastic Composites: A Research Report; VTT Technical Research Centre of Finland: Espoo, Finland, 2003.
14. Kazemi Najafi, S.,;, Mostafazadeh-Marznaaki, M.,;, Chaharmahali, M.,;, Tajvidi, J, Compos Mater 2009, 43, 2543.
15. Yousefnezhad, N., M.Sc. Thesis, Tarbiat Modares University, 2008.
16. Oksman, K.,;, Clemons, C., J Appl Polym Sci 1998, 67, 1503.
17. Farahmand, F.,;, Shokrollahi, P.,;, Mehrabzadeh, M., Iran Polym J 2003, 12, 185.
18. Hristov, V. N.,;, Lach, R.,;, Grellmann, W., Polym Test 2004, 23, 581.
19. Oksuz, M.,;, Eroglu, M., J Appl Polym Sci 2005, 98, 1445.
20. Sombatsompop, N.,;, Yotinwattanakumtorn, C.,;, Thongpin, C., J Appl Polym Sci 2005, 97, 475.
21. Feng, J.,;, Te-Fu, Q., J Forestry Res 2006, 17, 312.
22. Annual Book of ASTM Standards; ASTM D 1238-98; West Conshohocken, PA, 2002.
23. Greco, R.,;, Mancarella, C.,;, Martuscelli, E.,;, Ragosta, G.,;, Jinghua, Y., Polymer 1987, 28, 1929.
24. Avalos, F.,;, Lopez-Manchado, M. A.,;, Arroyo, M., Polymer 1996, 37, 568.
25. Marinelli, A. L.,;, Bretas, R. E. S., J Appl Polym Sci 2003, 87, 916.
26. Annual Book of ASTM Standards; ASTM D 7031-04; West Conshohocken, PA, 2002.
27. Annual Book of ASTM Standards; ASTM D 256-90b; West Conshohocken, PA: 2002.
28. Shojaie, A.,;, Yousefian, H.,;, Saharkhiz, S., J Appl Polym Sci 2007, 104, 1.
29. Incarnato, L.,;, Scarfato, P.,;, Acierno, D.,;, Milana, M. R.,;, Feliciani, R., J Appl Polym Sci 2003, 89, 1768.
30. Hernández-Sánchez, F.,;, Herrera-Franco, P. J., Polym Bull 2001, 45, 509.
31. Bremner, T.,;, Rudin, A.,;, Cook, D. G., J Appl Polym Sci 1990, 41, 1617.
32. Baquero, I.,;, Moreno, N.,;, Ichazo, M.,;, Sabino, A. M., In Proceedings of Annual Technical Conference on the Society of Plastic Engineering (ANTEC 2002); Society of Plastic Engineering, San Francisco, CA, USA, 2002.
33. Yadav, Y. S.,;, Jain, P. C., Thermochim Acta 1987, 117, 97.
34. Martuscelli, E.,;, Pracella, M.,;, Grispino, L., Polymer 1983, 24, 693.
35. Paukkeri, R.,;, Lehtinen, A., Polymer 1993, 34, 4083.
36. Gugumus, F., Polym Degrad Stab 1998, 62, 235.
37. Valenza, A.,;, La Mantia, F. P., Polym Degrad Stab 1988, 20, 63.
38. Narasimha Murathy, N., M.S. Thesis, Brigham Young University, 2005.
39. Moran, J.,;, Alvarez, V.,;, Petrucci, R.,;, Kenny, J.,;, Vazquez, A., J Appl Polym Sci 2007, 103, 228.
40. Hristov, V. N.,;, Vasileva, S. T., Polym Compos 2004, 25, 521.
41. Perkins, W. G., Polym Eng Sci 1999, 39, 2445.
42. Dikobe, D. G.,;, Luyt, A S., Express Polym Lett 2009, 3, 190.
43. Chow, P.,;, Bajwa, D. S.,;, Lu, W.,;, Youngquist, J. A.,;, Stark, N. M.,;, Li, Q.,;, Cook, C. G., In Proceedings of 1st Annual American Kenaf Society Meeting, San Antonio, 1998.
44. Tasdemir, M.,;, Yildirim, H., J Appl Polym Sci 2002, 83, 2967.
45. Moor, E. P., Polypropylene Handbook: Polymerization, Characterization, Properties, Processing, Applications; Hanser-Gardner: Munich, 1996.
46. Espert, A.,;, Vilaplana, F.,;, Karlsson, S., Compos A 2004, 35, 1267.