Stiffness constants prediction of nanocomposites using a periodic 3D-FEM model

Journal of Polymer Science, Part B: Polymer Physics

Volumn 50, Issue 3, 2012, Pages 207-220

  Cricrì, Gabriele ^a   Garofalo, Emilia ^a   Naddeo, Francesco ^a   Incarnato, Loredana ^a  

^a UNIVERSITY OF SALERNO   (Italy)

Author keywords

finite element analysis; mechanical properties; nano structures; nanocomposites; thin films

Indexed keywords

3D FINITE ELEMENT MODEL; ANALYTICAL MODEL; DRAW RATIO; EFFECTIVE ELASTIC PROPERTY; FE MODEL; FEM MODELS; FILM BLOWING; MODEL PREDICTION; MORI-TANAKA THEORY; NANOCOMPOSITE MORPHOLOGY; PILOT SCALE; POLYMER CHAINS; POLYMER NANOCOMPOSITE; PREDICTIVE MODELS; REPRESENTATIVE VOLUME ELEMENTS; STIFFNESS CONSTANTS; YOUNG'S MODULUS;

ELASTICITY; FINITE ELEMENT METHOD; FORECASTING; MATHEMATICAL MODELS; MECHANICAL PROPERTIES; MORPHOLOGY; NANOCOMPOSITE FILMS; NANOCOMPOSITES; POLYMER FILMS; POLYMERS; THIN FILMS; TRANSMISSION ELECTRON MICROSCOPY;

THREE DIMENSIONAL;

EID: 84555189266     PISSN: 08876266     EISSN: 10990488     Source Type: Journal    
DOI: 10.1002/polb.23001     Document Type: Article

References (47)

1. Pinnavaia, T. J., In Polymer-Layered Silicate Nanocomposites;, Beall, G. W., Ed.; Wiley: New York, 2001.
2. Alexandre, M.,;, Dubois, P., Mater. Sci. Eng. 2000, 28, 1-63.
3. LeBaron, P. C.,;, Wang, Z.,;, Pinnavaia, T. J., Appl. Clay Sci. 1999, 15, 11-29.
4. Shah, R. K.,;, Paul, D. R., Polymer 2004, 45, 2991-3000.
5. Paul, D. R.,;, Robeson, L. M., Polymer 2008, 49, 3187-3204.
6. Incarnato, L.,;, Scarfato, P.,;, Scatteia, L.,;, Acierno, D., Polymer 2004, 45, 3487-3496.
7. Russo, G. M.,;, Simon, G. P.,;, Incarnato, L., Macromolecules 2006, 39, 3855-3864.
8. Weon, J. I.,;, Sue, H. J., Polymer 2005, 46, 6325-6334.
9. Borse, N. K.,;, Kamal, M. R., Polym. Eng. Sci. 2006, 46, 1094-1103.
10. Masenelli-Varlot, K.,;, Reynaud, E.,;, Vigier, G.,;, Varlet, J., J. Polym. Sci. Part B: Polym. Phys. 2002, 40, 272-283.
11. VanderHart, D. L.,;, Asano, A.,;, Gilman, J. W., Chem. Mater. 2001, 13, 3796-3809.
12. Anastasiadis, S. H.,;, Karatasos, K.,;, Vlachos, G.,;, Manias, E.,;, Giannelis, E. P., Phys. Rev. Lett. 2000, 84, 915-918.
13. Zax, D. B.,;, Yang, D. K.,;, Santos, R. A.,;, Hegemann, H.,;, Giannelis, E. P.,;, Manias, E., J. Chem. Phys. 2000, 112, 2945-2951.
14. Incarnato, L.,;, Scarfato, P.,;, Russo, G. M.,;, Di Maio, L.,;, Iannelli, P.,;, Acierno, D., Polymer 2003, 44, 4625-4634.
15. Fornes, T. D.,;, Paul, D. R., Polymer 2003, 44, 4993-5013.
16. Kinlock, A. J.,;, Taylor, A. C., J. Mater. Sci. 2006, 41, 3271-3297.
17. Wang, J.,;, Pyrz, R., Compos. Sci. Technol. 2004, 64, 925-934.
18. Wang, J.,;, Pyrz, R., Compos. Sci. Technol. 2004, 64, 935-944.
19. Brune, D. A.,;, Bicerano, J. U., Polymer 2002, 43, 369-387.
20. Valavala, P. K.,;, Odegard, G. M., Rev. Adv. Mater. Sci. 2005, 9, 34-44.
21. Van Es, M.,;, Xiqiao, F.,;, van Turnhout, J.,;, Van der Giessen, E., In Comparing Polymer-Clay Nanocomposites with Conventional Composites Using Composite Modelling;, Al-Malaika, S.,;, Golovoy, A. W., Eds.; Blackwell Science: CA Malden, 2001; Chapter 21.
22. Hui, C. Y.,;, Shia, D., Polym. Eng. Sci. 1998, 38, 774-782.
23. Shia, D.,;, Hui, C. Y.,;, Burnside, S. D.,;, Giannelis, E. P., Polym. Compos. 1998, 19, 608-617.
24. Figiel, Å.,;, Buckley, C. P., Comput. Mater. Sci. 2009, 44, 1332-1343.
25. Sheng, N.,;, Boyce, M. C.,;, Parks, D. M.,;, Rutledge, G. C.,;, Abes, J. I.,;, Cohen, R. E., Polymer 2004, 45, 487-506.
26. Scocchi, G.,;, Posocco, P.,;, Danani, A.,;, Pricl, S.,;, Fermeglia, M., Fluid Phase Equilib. 2007, 261, 366-374.
27. Luo, J-J.,;, Daniel, I. M., Compos. Sci. Technol. 2003, 63, 1607-1616.
28. Garofalo, E.,;, Russo, G. M.,;, Di Maio, L.,;, Incarnato, L., e-Polymers 2009.
29. Zhu, L.,;, Narh, K. A., J. Polym. Sci. Part B: Polym. Phys. 2004, 42, 2391-2406.
30. Hbaieb, K.,;, Wang, Q. X.,;, Chia, Y. H. J.,;, Cotterell, B., Polymer 2007, 48, 901-909.
31. Li, Y.,;, Waas, A. M.,;, Arruda, E. M., J. Mech. Phys. Solids 2011, 59, 43-63.
32. Li, Y.,;, Waas, A. M.,;, Arruda, E. M., Int. J. Solids Struct. 2011, 48, 1044-1053.
33. Liu, H.,;, Brinson, L. C., Trans. ASME 2006, 73, 758-768.
34. Liu, H.,;, Brinson, L. C., Compos. Sci. Technol. 2008, 68, 1502-1512.
35. Garofalo, E.,;, Russo, G. M.,;, Scarfato, P.,;, Incarnato, L., J. Polym. Sci. Part B: Polym. Phys. 2009, 47, 981-993.
36. Park, S.-Y.,;, Cho, Y.-H.,;, Vaia, R. A., Macromolecules 2005, 38, 1729-1735.
37. Vermogen, A.,;, Masanelli-Varlot, K.,;, Duchet-Rumeau, J.,;, Boucard, S.,;, Prele, P., Macromolecules 2005, 38, 9661-9669.
38. Russo, G. M.,;, Garofalo, E.,;, Montesano, S.,;, Incarnato, L., In Proceedings of PPS 24TH Conference, Salerno, Italy, June 15-19, 2008; pp 1-4.
39. Garofalo, E.,;, Russo, M. G.,;, Incarnato, L.,;, Di Maio, L., In Proceedings of 17th International Conference on Composite Materials, Edinburgh, United Kingdom, July 27-31, 2009; pp 1-10.
40. Ward, I. M.,;, Hadley, D. W., In An Introduction to the Mechanical. Properties of Solid Polymer; Wiley: New York, 1993.
41. Ward, I. M., In Structure and Properties of Oriented Polymers; Chapman & Hall: London SE1 8HN, UK, 1997.
42. Ponte Castañeda, P.,;, Willis, J. R., J. Mech. Phys. Solids 1995, 43, 1919-1951.
43. Benveniste, Y., Mech. Mater. 1987, 6, 147-157.
44. Benveniste, Y.,;, Dvorak, G. J.,;, Chen, T., J. Mech. Phys. Solids 1991, 39, 927-946.
45. SchjÃdt-Thomsen, J.,;, Pyrz, R., Mech. Mater. 2001, 33, 531-544.
46. Kinoshita, N.,;, Mura, T., Phys. Status Solidi 1971, 5, 759-768.
47. Hori, M.,;, Nemat-Nasser, S., Mech. Mater. 1999, 31, 667-682.