Diameter dependence of the apparent tensile modulus of hemp fibres: A morphological, structural or ultrastructural effect?

Composites Part A: Applied Science and Manufacturing

Volumn 43, Issue 2, 2012, Pages 275-287

  Placet, Vincent ^a   Trivaudey, Frédérique ^a   Cisse, Ousseynou ^a   Gucheret Retel, Violaine ^a   Boubakar, M Lamine ^a  

^a UNIVERSITÉ DE FRANCHE COMTÉ   (France)

Author keywords

B. Mechanical properties; C. Analytical modelling; D. Mechanical testing; Hemp fibres

Indexed keywords

3D MORPHOLOGY; ANALYTICAL MODELLING; CELLULOSE CRYSTALLINITY; CELLULOSE MICROFIBRILS; CYLINDRICAL GEOMETRY; E-MODULUS; ELASTIC THEORY; FIBRE MORPHOLOGY; FIBRE STRUCTURE; MICROFIBRIL ANGLES; MULTI-LAYERED; STRUCTURAL EFFECT; YOUNG'S MODULUS;

CELLULOSE; CYLINDERS (SHAPES); ELASTIC MODULI; HEMP; HEMP FIBERS; MATHEMATICAL MODELS; MATHEMATICAL MORPHOLOGY; MECHANICAL TESTING; MORPHOLOGY; THREE DIMENSIONAL;

FIBERS;

ANATOMY; CELLULOSE; CYLINDERS; FIBERS; HEMP; MATHEMATICAL MODELS; MECHANICAL TESTS; THREE DIMENSIONAL DESIGN;

EID: 83955162231     PISSN: 1359835X     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compositesa.2011.10.019     Document Type: Article

References (68)

1. T. Schäfer, and B. Hornermeier Effect of sowing date and plant density on the cell morphology of hemp (Cannbis sativa L Ind Crop Prod 23 2006 88 98 (Pubitemid 43129456)
2. Thygesen A. Properties of hemp fibre polymer composites - an optimisation of fibre properties using novel defibration methods and fibre characterisation. PhD thesis report; 2006. p. 146.
3. D. Crônier, B. Monties, and B. Chabbert Structure and chemical composition of bast fibers isolated from developing hemp stem J Agric Food Chem 53 2005 8279 8289 (Pubitemid 41564638)
4. A. Bergander, and L. Salmén Transverse fibre wall properties Holzforschung 54 2000 654 660
5. S. Andersson, R. Serimaa, T. Paakkari, P. Saranpää, and E. Personen Crystallinity of wood and the size of cellulose crystallites in Norway spruce (Picea abies) J Wood Sci 49 2003 531 537 (Pubitemid 38192323)
6. J. Fahlén, and L. Salmén Reflections on the ultrastructure of softwood fibres Cell Chem Technol 40 2006 181 185
7. C. Baley Analysis of the flax fibres tensile behaviour and analysis of the tensile stiffness increase Composites: Part A 33 2002 939 948 (Pubitemid 34862489)
8. A. Nechwatal, K.P. Mieck, and T. Reusmann Developments in the characterization of natural fibre properties and in the use of natural fibres for composites Compos Sci Technol 63 2003 1273 1279 (Pubitemid 36685050)
9. W. Hu, M.T. Ton-That, F. Perrin-Sarazin, and J. Denault An improved method for single fiber tensile test of natural fibers Polym Eng Sci 50 4 2010 819 825
10. K. Charlet, J.P. Jernot, M. Gomina, J. Bréard, C. Morvan, and C. Baley Influence of an Agatha flax fibre location in a stem on its mechanical properties Compos Sci Technol 69 2009 1399 1403
11. J. Gassan, and V.S. Gutowski Effect of corona discharge and V treatment on the properties of jute-fibre epoxy composites Compos Sci Technol 60 2000 2857 2863
12. C. Baley, F. Busnel, Y. Grohens, and O. Sire Influence of the chemical treatments on surface properties and adhesion of flax fibre-polyester resin Composites: Part A 37 2006 1626 1637 (Pubitemid 44429949)
13. J. Gassan, and A.K. Bledzki Thermal degradation of flax and jute fibers J Appl Polym Sci 82 6 2001 1417 1422 (Pubitemid 32933731)
14. G.C. Davies, and D.M. Bruce Effect of environmental relative humidity and damage on the tensile properties of flax and nettle fibers Text Res J 68 9 1998 623 629 (Pubitemid 28504525)
15. A. Stamboulis, C.A. Baillie, and T. Peijs Effects of environmental conditions on mechanical and physical properties of flax fibers Composites: Part A 32 2001 1105 1115 (Pubitemid 32618149)
16. V. Placet Characterization of the thermo-mechanical behaviour of hemp fibres intended for the manufacturing of high performance composites Composites: Part A 40 2009 1111 1118
17. C. Baley, C. Morvan, and Y. Grohens Influence of the absorbed water on the tensile strength of flax fibers Macromol Symp 222 2005 195 201 (Pubitemid 40820035)
18. M.C. Symington, W.M. Banks, O.D. West, and R.A. Pethrick Tensile testing of cellulose based natural fibers for structural composite applications J Compos Mater 43 9 2009 1083 1108
19. Y. Xue, Y. Du, S. Elder, K. Wang, and J. Zhang Temperature and loading rate effects on tensile properties of kenaf bast fiber bundles and composites Composites: Part B 2008 10.1016/j.compositesb.2008.10.00
20. F.A. Silva, N. Chawla, and R.D. Toledo Filho An experimental investigation of the fatigue behaviour of sisal fibers Mater Sci Eng A 516 2009 90 95
21. J. Andersonns, E. Spärnins, R. Joffe, and L. Wallström Strength distribution of elementary flax fibres Compos Sci Technol 65 2005 693 702 (Pubitemid 40077576)
22. N.E. Zafeiropoulos, and C.A. Baillie A study of the effect of surface treatments on the tensile strength of flax fibres: Part II. Application of Weibull statistics Composites: Part A 38 2007 629 638 (Pubitemid 44839226)
23. Charlet K. Contribution l'étude de composites unidirectionnels renforcés par des fibres de lin: relation entre la microstructure de la fibre et ses propriétés mécaniques. PhD thesis; 2008.
24. M. Fan Characterization and performance of elementary hemp fibres: factors influencing tensile strength BioResources 5 4 2010 2307 2322
25. L.L. da Costa, R.L. Loiola, and S.N. Monteiro Diameter dependence of tensile strength by Weibull analysis: Part I bamboo fiber Revista Matéria 15 2 2010 110 116
26. A.B. Bevitori, I.L.A. da Silva, F.P.D. Lopes, and S.N. Monteiro Diameter dependence of tensile strength by Weibull analysis: Part II jute fiber Revista Matéria 15 2 2010 125 131
27. W.P. Inacio, F.P.D. Lopes, and S.N. Monteiro Diameter dependence of tensile strength by Weibull analysis: Part III sisal fiber Revista Matéria 15 2 2010 124 130
28. F. de Andrade Silva, N. Chawla, and R.D. de Toledo Filho Tensile behavior of high performance natural (sisal) fibers Compos Sci Technol 68 2008 3438 3443
29. K. Charlet, C. Baley, C. Morvan, J.P. Jernot, M. Gomina, and J. Bréard Characteristics of Herms flax fibres as a function of their location in the stem and properties of the derived unidirectional composites Composites Part A 38 2007 1912 1921 (Pubitemid 47059014)
30. A. Bourmaud, C. Morvan, and C. Baley Importance of fiber preparation to optimize the surface and mechanical properties of unitary flax fiber Ind Crop Prod 32 2010 662 667
31. A. Duval, A. Bourmaud, L. Augier, and C. Baley Influence of the sampling area of the stem on the mechanical properties of hemp fibers Mater Lett 65 2011 797 800
32. E. Bodros, and C. Baley Study of the tensile properties of stinging nettle fibres (Urtica dioica) Mater Lett 62 2008 2143 2145
33. A.S. Virk, W. Hall, and J. Summerscales Multiple Data Set (MDS) weak-link scaling analysis of jute fibres Composites Part A 40 2009 1764 1771
34. J. Summerscales, W. Hall, and A.S. Virk A fibre diameter distribution factor (FDDF) for natural fibre composites J Mater Sci 46 2011 5876 5880
35. A.A. Griffith The phenomena of rupture and flow in solids Philos Trans Roy Soc A 21 1921 163 198
36. B. Abbey, S. Eve, A. Thuault, K. Charlet, and A. Korunsky Synchrotron X-ray tomographic investigation of internal structure of individual flax fibres IFMBE Proc 31 2010 1151 1154
37. J. Gassan, A. Chate, and A.K. Bledzki Calculation of elastic properties of natural fibers J Mater Sci 36 2001 3715 3720 (Pubitemid 32819552)
38. T. Nilsson, and P.J. Gustafsson Influence of dislocations and plasticity on the tensile behaviour of flax and hemp fibres Composites: Part A 38 2007 1722 1728 (Pubitemid 46921488)
39. R.C. Neagu, and E.K. Gamstedt Modelling of effects of ultrastructural morphology of the hygroelastic properties of wood fibres J Mater Sci 42 2007 10254 10274 (Pubitemid 47536753)
40. E. Marklund, and J. Varna Modeling the effect of helical fiber structure on wood fiber composite elastic properties Appl Compos Mater 16 2009 245 262
41. J.F. Siau Transport processes in wood 1984 Springer Heidelberg
42. E. Jacquet, and F. Trivaudey Varchon DCalculation of the transverse modulus of a unidirectional composite material and of the modulus of an aggregate. Application of the rule of mixtures Compos Sci Technol 60 2000 345 350 (Pubitemid 30553121)
43. L.G. Thygesen, M. Eder, and I. Burgert Dislocations in single hemp fibres - investigations into the relationship of structural distortions and tensile properties at the cell wall level J Mater Sci 42 2007 558 564 (Pubitemid 46198656)
44. C. Bergfjord, and B. Holst A procedure for identifying textile bast fibres using microscopy: flax, nettle/ramie, hemp and jute Ultramicroscopy 110 2010 1192 1197
45. I. Burgert, and P. Fratzl Plants control the properties and actuation of their organs through the orientation of cellulose fibrils in their cell walls Integr Comp Biol 49 1 2009 69 79
46. L. Köhler Biphasic mechanical behavior of plant tissues Mater Sci Eng C 11 2000 51 56
47. E.C. Mc Laughlin, and R.A. Tait Fracture mechanism of plant fibres J Mater Sci 15 1980 89 95
48. S. Eichhorn, and R.J. Young Composite micromechanics of hemp fibres and epoxy resin microdoplets Compos Sci Technol 64 2004 767 772 (Pubitemid 38154481)
49. M. Candilo, P. Ranalli, and C. Bozzi Preliminary results of tests facing with the controlled retting of hemp Ind Crop Prod 11 2000 197 203 (Pubitemid 30172117)
50. D. Dai, and M. Fan Characteristic and performance of elementary hemp fibre Mater Sci Appl 1 2010 336 342
51. H.P. Fink, E. Walenta, and J. Kunze The supramolecular structure of bast fibres and their changes by mercerization as revealed by X-ray diffraction and 13C-NMR spectroscopy Papier 53 9 1999 534 542 (Pubitemid 30509320)
52. Placet V, Bouali A, Perré P. The possible role of microfibril angle of hemp fibre during fatigue tests and its determination using wide-angle X-ray diffraction. Matériaux & Techniques, in press, doi:10.1051/mattech/2011120.
53. P. Medeghini Bonatti, C. Ferrari, B. Focher, C. Grippo, G. Torri, and C. Cosentino Histochemical and supramolecular studies in determining quality of hemp fibre for textile applications Euphytica 140 2004 55 64 (Pubitemid 40473737)
54. A.K. Mohanty, M. Misra, and L.T. Drzal Natural fibers, biopolymer and biocomposites 2005 CRC Press, Taylor & Francis group Boca Raton (Fl) p. 875
55. T. Nishino Natural fibre resources in green composites C. Baillie, 2004 Woodhead Publishing Limited England
56. K. Charlet, J.P. Jernot, J. Bréard, and M. Gomina Scattering of morphological and mechanical properties of flax fibres Ind Crop Prod 32 2010 220 224
57. G.W. Beckermann, and K.L. Pickering Engineering and evaluation of hemp fibre reinforced polypropylene composites: fibre treatment and matrix modification Compos A Appl Sci Manuf 39 2008 979 988
58. A. Bourmaud, and C. Baley Rigidity analysis of polypropylene/vegetal fibre composites after recycling Polym Degrad Stab 4 2009 297 305
59. Robson D, Hague J. In: Proceedings of the conference on woodfiber-plastic composites (Forest Products Society), Madison, Wisconsin, USA; 1995. p. 41.
60. A. Keller Compounding and mechanical properties of biodegradable hemp fiber composites Compos Sci Technol 63 9 2003 1307 1316 (Pubitemid 36685053)
61. Z. Li, X. Wang, and L. Wang Properties of hemp fiber reinforced concrete composites Fibers Polym 5 3 2004 187 197
62. S. Carbillet, F. Richard, and L. Boubakar Reliability indicator for layered composites with strongly non-linear behavior Compos Sci Technol 69 2009 81 87
63. H.F. Mark Encyclopedia of polymer science and technology - plastics, resins, rubbers, fibers vol. 3 1982 Wiley New York
64. Madsen B. Properties of plant fibre yarn polymer composites - an experimental study. PhD thesis; 2004.
65. W. Chen, G.C. Lickfield, and C.Q. Yang Molecular modeling of cellulose in amorphous state. Part I. Model building and plastic deformation study Polymer 45 2004 1063 1071 (Pubitemid 38156003)
66. A.C. O'Sullivan Cellulose: the structure slowly unravels Cellulose 4 1997 173 207 (Pubitemid 127508792)
67. P.H. Hermans, and A. Weidinger X-ray studies on the crystallinity of cellulose J Polym Sci 4 1949 135 144
68. L. Salmén, and E. Bergström Cellulose structural arrangement in relation to spectral changes in tensile loading FTIR Cellulose 16 2009 975 982