Biodegradable polyurethanes from sugar cane biowastes

Cellulose Chemistry and Technology

Volumn 45, Issue 7-8, 2011, Pages 507-514

  Vega Baudrit, José ^a,b   Delgado Montero, Karina ^a   Madrigal Carballo, Sergio ^a  

^a UNIVERSIDAD NACIONAL   (Costa Rica)

^b Centro Nacional de Alta Tecnología   (Costa Rica)

Author keywords

Biodegradation; Biowastes; Foams; Polyurethanes; Sugar cane

Indexed keywords

AQUEOUS SOLVENTS; AVERAGE PARTICLE SIZE; BAGASSE FIBERS; BIO-WASTE; BIODEGRADABLE POLYURETHANES; BIOWASTES; BULK DENSITY; COMPRESSION MODULUS; DIBUTYLTIN; DIPHENYLMETHANE DIISOCYANATE; EXTRACTABILITY; GENERAL TRENDS; HOLOCELLULOSE; LATIN AMERICA; MAXIMUM VALUES; MILLED FIBERS; PACKAGING INDUSTRY; PARTIAL REPLACEMENT; POLYMERIC MATRICES; POLYURETHANE FOAMS; PRODUCTION COST; REPRESENTATIVE VALUES; SHORT PERIODS; SUGAR CANE BAGASSE FIBERS; SUGAR CANE MOLASSES; VALUE ADDED APPLICATIONS;

BAGASSE; BIODEGRADABLE POLYMERS; BIODEGRADATION; CELLULOSE; COMPOSITE MATERIALS; DEGRADATION; DENSITY (SPECIFIC GRAVITY); FIBERS; FOAMS; LIGNIN; MATERIALS PROPERTIES; MOLASSES; POLYURETHANES; REINFORCEMENT; SUGAR INDUSTRY; SUGARS; THERMOANALYSIS; THERMOGRAVIMETRIC ANALYSIS;

SUGAR CANE;

BAGASSE; BIODEGRADATION; CELLULOSE; COMPOSITES; DEGRADATION; FIBERS; FOAM; GRAVIMETRY; LIGNINS; MOLASSES; POLYMERS; POLYURETHANES; REINFORCEMENT; SUGARS; THERMAL ANALYSIS;

EID: 83255193037     PISSN: 05769787     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (38)

1. M. Moya, in "Development of Environmentally Compatible Polymers from Biowaste", Inform, San José, Costa Rica, 2001, p. 25.
2. M. Duran, M. Moya and M. Sibaja, Ingeniería, 3, 53(1993).
3. M. Chaves, in "Development of Environmentally Compatible Polymers from Biowaste", Inform, Costa Rica, 2001, p. 170.
4. nd ed., México, 1990.
5. R. Sanjuán, "Obtención de pulpas y propiedades de las fibras para papel", México, Universidad de Guadalajara, 1997, p. 19.
6. J. L. Gómez, C. Jarones and P. Gañán, Plásticos Modernos, 76, 183(1998).
7. J. Vega-Baudrit, M. Moya, M. Sibaja, R. Pereira and P. Alvarado, Química e Industria, 51, 572 (2004).
8. J. M. Arribas, J. M. Navarro and J. M. Perea, Plásticos Modernos, 81, 467 (2001).
9. M. Arroyo and L. Ibarra, Plásticos Modernos, 465, 226(1995).
10. M. A. López and M. Arroyo, Plásticos Modernos, 85, 594 (2003).
11. S. Hirose, K. Kobashigawa and H. Hatakeyama, Sen-1 - Gakkaishi, 50, 78 (1994).
12. S. Hirose, K. Kobashigawa, T. Tokashiki, H. Naka and H. Hatakeyama, in "Recent Advances in Environmentally Compatible Polymers", edited by J. F. Kennedy, G. Phillips, P. Williams, Woodhead, London, 2001, p. 229.
13. Y. Asano, H. Hatakeyama, S. Hisose and T. Hatakeyama, in "Recent Advances in Environmentally Compatible Polymers", edited by J. F. Kennedy, G. Phillips, P. Williams, Woodhead, London, 2001, p. 181.
14. K. Nakamuta, M. Iijima, E. Kinoshita and H. Hatakeyama, in "Recent Advances in Environmentally Compatible Polymers", edited by J. F. Kennedy, G. Phillips, P. Williams, Woodhead, London, 2001, p. 241.
15. H. Hatakeyama, D. Kamakura, H. Kasahara, S. Hirose and H. Hatakeyama, "Recent Advances in Environmentally Compatible Polymers", edited by J. F. Kennedy, G. Phillips, P. Williams, Woodhead, London, p. 191 (2002).
16. H. Hatakeyama, S. Hirose, K. Nakamura and H. Hatakeyama, in "Cellulosics: Chemical, biochemical and material aspects", Ellis Horwood, Series in Polymer Science and Technology, 1992, p. 142.
17. M. Lopretti, A. Montalbán, E. L. Martínez and H. Espino, Indotecnia, 6, 25 (1993).
18. M. Duran, H. Hatakeyama, M. Aikawa, S. Hirose and K. Kasuga, Research of Polyurethanes from Lignocelluloses, 9112, 51 (1995).
19. M. Moya, M. Sibaja, M. Duran and J. VcgaBaudrit, Uniciencia, 12, 39 (1995).
20. J. Vega-Baudrit, M. Moya, M. Sobaja and M. Duran, Química e Industria, 49, 531, (2002).
21. M. A. López and M. Arroyo, Plásticos Modernos, 85, 594 (2003).
22. J. Vega-Baudrit, P. Alvarado-Aguilar, R. Sibaja-Ballestero, M. Moya-Portugucz and S. Nikolaev, Revista Iberoamericana de Polímeros, 6, 199(2005).
23. J. Vega-Baudrit, K. Delgado-Montero, M. Moya-Portuguez, M. Sibaja-Ballestero and P. Alvarado Aguilar, Revista Iberoamericana de Polimeros, 9, 4 (2008).
24. J. Vega-Baudrit, Graduation Thesis in Chemistry, Universidad de Costa Rica, San José, Costa Rica, 1994,94 pp.
25. American National Standard Institute, "Standard Method of Test for Ash in Wood", Designation D 1102-56, American National Standard 013.1-1960 (1974).
26. American National Standard Institute, "Standard Method of Test for Water Solubility of Wood", Designation D 1105-56, American National Standard 013.9-1960. 349, 350 (1974).
27. American National Standard Institute, "Standard Method of Test for Alcohol/benzene Solubility of Wood", Designation D 1107-56, American National Standard 013.6-1960. 346, 345 (1974).
28. American National Standard Institute, "Standard Method of Test for Holocellulosc in Wood", Designation D 1104-56, American National Standard 013.3-1960 (1974).
29. American National Standard Institute, "Standard Method of Test for Lignin in Wood", Designation D 1106-56, American National Standard 013.5-1960. 342, 343 (1974).
30. American National Standard Institute, "Standard Method of Test for Alphacellulose in Wood". Designation D 1103-60, American National Standard 013.2-1960 (1974).
31. American Society for Testing and Materials (ASTM), "Standard Method of Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols", D 4274-88 (1991).
32. American Society for Testing and Materials (ASTM) "Standard Test Methods for Compressive Properties of Rigid Cellular Plastics", D 1621-73, 488-490(1991).
33. J. M. Martin and A. C. Orgilés, Curso sobre poliuretanos, INESCOP, Alicante, España, 1994, 125 pp.
34. R. Pereira, Despulpado etanol-agúa de bagazo de caña de azúcar. Estudio cinético y derivatización de la pulpa obtenida. Proyecto de Graduación. Universidad de Sao Paulo, Brasil, 1995,220 pp.
35. G. Ocrtel, "Polyurethanes Handbook", Mc Millan Publishing, New York, 1993,668 pp.
36. T. Hatakeyama and F. X. Quinn, in 'Thermal analysis", Wiley & Sons, London, 1999, p. 36.
37. L. Pothan, S. Thomas and N. Neelakantan, J. Reinf. Plast. Comp., 16, 756 (1997).
38. C. Salom, R. M. Masegosa and M. Prolongo, Plásticos Modernos, 80, 661 (2000).