High performance reactive blends composed of poly(p-phenylene sulfide) and ethylene copolymers

Polymer Journal

Volumn 43, Issue 12, 2011, Pages 991-999

  Oyama, Hideko T ^a   Matsushita, Mayu ^a   Furuta, Motonobu ^a  

^a RIKKYO UNIVERSITY   (Japan)

Author keywords

blend; copolymer; interface; poly(ethylene ran glycidyl methacrylate); poly(phenylene sulfide)

Indexed keywords

BLEND; ETHYLENE COPOLYMER; HEAT STABILITY; HIGH PERFORMANCE POLYMER; HIGH SHEAR RATE; HIGH THERMAL STABILITY; INTERFACIAL ADHESIONS; MATRIX; MELT MIXING; METHYL METHACRYLATES; POLY(ETHYLENE-RAN-GLYCIDYL METHACRYLATE); POLY(P-PHENYLENE SULFIDE); POLY(PHENYLENE SULFIDE); REACTIVE BLENDS;

ADHESION; AROMATIC COMPOUNDS; BLENDING; CHEMICAL REACTIONS; CHEMICAL RESISTANCE; CHEMICAL STABILITY; COPOLYMERS; ESTERS; ETHYLENE; FRACTURE MECHANICS; HEAT RESISTANCE; INTERFACES (MATERIALS); MECHANICAL PROPERTIES; MOLECULAR MASS; POLYMER BLENDS; SULFUR COMPOUNDS;

ACRYLIC MONOMERS;

EID: 82955199946     PISSN: 00323896     EISSN: 13490540     Source Type: Journal    
DOI: 10.1038/pj.2011.106     Document Type: Article

References (39)

1. Masamoto, J. Poly(p-phenylene sulfide), In: Polymer Data Handbook (ed. Mark, J.E.) 714-721 (Oxford University Press, 1999).
2. López, L. C., Wilkes, G. L. & Geibel, J. Crystallization kinetics of poly(p-phenylene sulphide): The effect of branching agent content and endgroup counter-atom. Polymer 30, 147-155 (1989).
3. Menczel, J. D. & Collins, G. L. Thermal analysis of poly(phenylene sulfide) polymers. I: Thermal characterization of PPS polymers of different molecular weights. Polym. Eng. Sci. 32, 1264-1269 (1992).
4. Hill Jr, H. W. & Brady, D. G. in Encyclopedia of Polymer Science and Technology, vol. 11, 2nd edn (ed. Mark, H.F.) 531 (Wiley-Interscience, New York, 1988).
5. Cheung, M. F. & Plummer, H. K. Tensile fracture morphology of polysulfonepoly( phenylene sulfide) blends. Polym. Bull. 26, 349-356 (1991).
6. Shibata, M., Yosomiya, R., Jiang, Z., Yang, Z., Wang, G., Ma, R. & Wu, Z. Crystallization and melting behavior of poly(p-phenylene sulfide) in blends with poly(ether sulfone). J. Appl. Polym. Sci. 74, 1686-1692 (1999). (Pubitemid 30510532)
7. Lai, M. & Liu, J. Thermal and dynamic mechanical properties of PES/PPS blends. J. Therm. Anal. Cal. 77, 935-945 (2004).
8. Gabellini, G., de Moraes, M. B. & Bretas, R. E. S. Poly(p-phenylene sulphide)/liquid crystalline polymer blends. I. Miscibility and morphologic studies. J. Appl. Polym. Sci. 60, 21-27 (1996). (Pubitemid 126544143)
9. Gopakumar, T. G., Ghadage, R. S., Ponrathnam, S., Rajan, C. R. & Fradet, A. Poly(phenylene sulfide)/liquid crystalline polymer blends: 1. Non-isothermal crystallization kinetics. Polymer 38, 2209-2214 (1997). (Pubitemid 127419078)
10. Gopakumar, T. G., Ponrathnam, S., Lele, A. & Fradet, A. In situ compatibilisation of poly(phenylene sulphide)/wholly aromatic thermotropic liquid crystalline polymer blends by reactive extrusion: Morphology, thermal and mechanical properties. Polymer 40, 357-364 (1999). (Pubitemid 29053349)
11. Tang, W., Hu, X., Tang, J. & Jin, R. Toughening and compatibilization of polyphenylene sulfide/nylon 66 blends with SEBS and maleic anhydride grafted SEBS triblock copolymers. J. Appl. Polym. Sci. 106, 2648-2655 (2007). (Pubitemid 47549330)
12. Zhang, R., Huang, Y., Min, M., Gao, Y., Lu, A. & Lu, Z. Nonisothermal crystallization of polyamide 66/poly(phenylene sulfide) blends. J. Appl. Polym. Sci. 107, 2600-2606 (2008). (Pubitemid 351204686)
13. An, J. B., Suzuki, T., Ougizawa, T., Inoue, T., Mitamura, K. & Kawanishi, K. Studies on miscibility and phase-separated morphology of nylon 4,6/poly(phenylene sulfide) blend under shear flow. J. Macromol. Sci., Physics B 41, 407-418 (2002). (Pubitemid 34789816)
14. Jog, J. P., Shingankuli, V. L. & Nadkarni, V. M. Crystallization of poly(phenylene sulfide) in blends with high density polyethylene and poly(ethylene terephthalate). Polymer 34, 1966 (1993).
15. Hanley, S. J., Nesheiwat, A. M., Chen, R. T., Jamieson, M., Pearson, R. A. & Sperling, L. H. Phase separation in semicrystalline blends of poly(phenylene sulfide) and poly(ethylene terephthalate). II. Effect of poly(phenylene sulfide) homopolymer solubilization of PPS-graft-PET copolymer on morphology and crystallization behavior. J. Polym. Sci., Part B: Polym. Phys. 38, 599-610 (2000). (Pubitemid 30562389)
16. Chen, C. M., Hsieh, T. E. & Liu, M. O. Preparation of epoxy-modified polyethylene by graft extrusion and its applications to polyphenylene sulfide alloys as a compatibilizer. React. Funct. Polym. 68, 1307-1313 (2008).
17. Kubo, K. & Masamoto, J. Microdispersion of polyphenylene ether in polyphenylene sulfide/polyphenylene ether alloy compatibilized by styrene-co-glycidyl methacrylate. J. Appl. Polym. Sci. 86, 3030-3034 (2002). (Pubitemid 35263936)
18. Choi, J., Lim, S., Kim, J. & Choe, C. R. Studies of an epoxy-compatibilized poly(phenylene sulfide)/polycarbonate blend. Polymer 38, 4401-4406 (1997). (Pubitemid 127421513)
19. Mizuno, S. & Kawabata, J. Poly(phenylene sulfide) alloys in Development and Application of Polymer Alloys (eds. Akiyama, S., Izawa, S.), Chapter 14 (CMC Co., Ltd, Tokyo, Japan, 2003).
20. Chen, Z., Liu, X., Li, T. & Lü , R. Mechanical and tribological properties of PA66/PPS blend. II. Filled with PTFE. J. Appl. Polym. Sci. 101, 969-977 (2006). (Pubitemid 43904306)
21. Chen, Z., Liu, X., Lü , R. & Li, T. Mechanical and tribological properties of PA66/PPS blend. III. Reinforced with GF. J. Appl. Polym. Sci. 102, 523-529 (2006). (Pubitemid 44529405)
22. Zou, H., Wang, K., Zhang, Q. & Fu, Q. A change of phase morphology in poly(pphenylene sulfide)/polyamide 66 blends induced by adding multi-walled carbon nanotubes. Polymer 47, 7821-7826 (2006). (Pubitemid 44485757)
23. Yoon, P. J. & White, J. L. Interfacial tension of poly(p-phenylene sulfide) with other polymer melts. J. Appl. Polym. Sci. 51, 1515-1519 (1994).
24. Chen, T. H. & Su, A. C. Morphology of poly(p-phenylene sulfide) polyethylene blends. Polymer 34, 4826-4831 (1993).
25. Hisamatsu, T., Nakano, S., Adachi, T., Ishikawa, M. & Iwakura, K. The effect of compatibility on toughness of PPS/SEBS polymer alloy. Polymer 41, 4803-4809 (2000). (Pubitemid 30193106)
26. Hwang, S. H., Kim, M. J. & Jung, J. C. Mechanical and thermal properties of syndiotactic polystyrene blends with poly(p-phenylene sulfide). Eur. Polym. J. 38, 1881-1885 (2002).
27. Masamoto, J. & Kubo, K. Elastomer-toughened poly(phenylene sulfide). Polym. Eng. Sci. 36, 265-270 (1996).
28. Lee, S. & Chun, B. C. Effect of EGMA content on the tensile and impact properties of poly(phenylene sulfide)/EGMA blends. Polymer 39, 6441-6447 (1998). (Pubitemid 128370045)
29. Takase, H., Mikata, Y., Matsuda, S. & Murakami, A. Dispersion of carbon-nanotubes in a polymer matrix by a twin-screw extruder. Seikei-Kakou 14, 126-131 (2002).
30. Oyama, H. T., Sekikawa, M. & Ikezawa, Y. Influence of the polymer/inorganic filler interface on the mechanical, thermal, and flame retardant properties of polypropylene/ magnesium hydroxide composites. J. Macromol. Sci., Part B: Phys 50, 463-483 (2011).
31. Liang, J. Z. & Li, R. K. Y. Rheological properties of glass bead-filled low-density polyethylene composite melts in capillary extrusion. J. Appl. Polym. Sci. 73, 1451-1456 (1999). (Pubitemid 129564150)
32. Lee, B. L. & White, J. L. Experimental studies of disperse 2-phase flow of molten polymers through dies. Trans. Soc. Rheol. 19, 481-492 (1975).
33. Macosko, C. W. Morphology development and control in immiscible polymer blends. Macromol. Symp. 149, 171-184 (2000).
34. Wade, B., Sbhiraman, A. S., Wharry, S. & Sutherlin, D. High-temperature, highresolution nuclear magnetic resonance of poly(p-phenylene sulfide). J. Polym. Sci., Part B: Polym. Phys. 28, 1233-1249 (1990). (Pubitemid 20707184)
35. Leibler, L. Emulsifying effects of block copolymers in incompatible polymer blends. Makromol. Chem. Macromol. Symp. 16, 1-17 (1988).
36. Ibuki, J., Charoensirisomboon, P., Chiba, T., Ougizawa, T., Inoue, T., Weber, M. & Koch, E. Reactive blending of polysulfone with polyamide: A potential for solvent-free freparation of the block copolymer. Polymer 40, 647-653 (1999). (Pubitemid 29107822)
37. Charoensirisomboon, P., Inoue, T. & Weber, M. Pull-out of copolymer in situformed during reactive blending: Effect of the copolymer architecture. Polymer 41, 6907-6912 (2000). (Pubitemid 30345379)
38. Manring, L. E. Thermal degradation of saturated poly(methyl methacrylate). Maromolecules 21, 528-530 (1988).
39. Ahmad, Z., Al-Awadi, N. A. & Al-Sagheer, F. Thermal degradation studies in poly(vinyl chloride)/poly(methyl methacrylate) blends. Polym. Degrad. Stab. 93, 456-465 (2008).