Intelligent diagnosis and prognosis of industrial networked systems

Intelligent Diagnosis and Prognosis of Industrial Networked Systems

Volumn , Issue , 2011, Pages 1-279

  Pang, Chee Khiang ^a   Lewis, Frank L ^b   Lee, Tong Heng ^a   Dong, Zhao Yang ^c  

^a NATIONAL UNIVERSITY OF SINGAPORE   (Singapore)

^b UNIVERSITY OF TEXAS AT ARLINGTON   (United States)

^c HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 82855182278     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Book

References (263)

1. G.Vachtsevanos, F. L. Lewis, M. Roemer, A.Hess, and B.Wu, Intelligent FaultDiagnosis and Prognosis for Engineering Systems, Wiley, 2006.
2. P. Baruah and R. B. Chinnam, “HMMs for Diagnostics and Prognostics in Machining Processes,” International Journal of Production Research, Vol. 43, No. 6, pp. 1275-1293, March 2005.
3. H. M. Ertunc, K. A. Loparo, and H. Ocak, “ToolWear Condition Monitoring in Drilling Operations Using Hidden Markov Models,” International Journal of Machine Tools and Manufacture, Vol. 41, No. 9, pp. 1363-1384, 2001.
4. J. Kang, C. Feng, and H. Hu, “Tool Wear Monitoring and Pattern Recognition of Tool Failure,” Journal of Vibration: Measurement and Diagnosis, Vol. 29, No. 1, pp. 5-9, 2009.
5. L. Wang, M. G. Mehrabi, and E. Kannatey-Asibu, Jr., “Hidden Markov Model-Based Tool Wear Monitoring in Turning,” Journal of Manufacturing Science and Engineering, Vol. 124, No.3, pp. 651-658, August 2002.
6. K. Zhu, Y. S. Wong, and G. S. Hong, “Multi-Category Micro-Milling Tool Wear Monitoring with Continuous Hidden Markov Models,” Mechanical Systems and Signal Processing, Vol. 23, No. 2, pp. 547-560, February 2009.
7. C. Zhang, and S.Y. Liang, “Condition-BasedMaintenance of Rolling Element Bearings,” International Journal of COMADEM, Vol. 7, pp. 3-12, 2004.
8. C. Bunks, D. McCarthy, and T. Al-Ani, “Condition-Based Maintenance of Machines Using Hidden Markov Models,” Mechanical Systems and Signal Processing, Vol. 14, No. 4, pp. 597-612, July 2000.
9. H. Hu, M. An, G. Qin, and N. Hu, “Study on Fault Diagnosis and Prognosis Methods Based on Hidden Semi-MarkovModel,” Acta Armamentarii, Vol. 30, No. 1, pp. 69-75, 2009.
10. Z.Yang and M.Dong, “Equipment FaultDiagnosisUsingAutoregressiveHiddenMarkov Models,” Journal of Shanghai Jiaotong University, Vol. 42, No. 3, pp. 471-474, 2008.
11. A. Chen and G. S. Wu, “Real-Time Health Prognosis and Dynamic Preventive Maintenance Policy for Equipment Under Aging Markovian Deterioration,” International Journal of Production Research, Vol. 45, No. 15, pp. 3351-3379, August 2007.
12. H. Guo and X. Yang, “Quantitative Reliability Assessment for Safety Related Systems Using Markov Models,” Journal of Tsinghua University (Science and Technology), Vol. 48, No. 1, pp. 149-155, 2008.
13. S. Song and Z. Lu, “Markov Chain-Based Line SamplingMethod for Reliability Estimation of Structural Parallel SystemwithMultiple FailureModes,” Journal of Northwestern Polytechnical University, Vol. 26, No. 2, pp. 234-238, 2008.
14. G. N. Fouskitakis and S. D. Fassois, “Pseudolinear Estimation of Fractionally Integrated ARMA (ARFIMA)Models with Automotive Application,” IEEE Transactions on Signal Processing, Vol. 47, No. 12, pp. 3365-3380, December 1999.
15. S. J. Hu, and Y. G. Liu, “ProcessMean Shift Detection Using Prediction Error Analysis,” Journal of Manufacturing Science and Engineering, Vol. 120, No. 3, pp. 489-495, August 1998.
16. G. Wu, P. Liang, and X. Long, “Forecasting of Vibration Fault Series of Stream Turbine Rotor Based on ARMA,” Journal of South China University of Technology, Vol. 33, No. 1, pp. 67-73, 2005.
17. X. Li, X. Cui, and R. Lang, “Forecasting Method for Aeroengine Performance Parameters,” Journal of Beijing University of Aeronautics and Astronautics, Vol. 34, No. 3, pp. 253-256, 2005.
18. S. E. Oraby, A. F. Al-Modhuf, and D. R. Hayhurst, “A Diagnostic Approach for Turning Tool Based on the Dynamic Force Signals,” Journal of Manufacturing Science and Engineering, Vol. 127, No. 3, pp. 463-475, 2005.
19. V. T. Tran, B. -S. Yang, M. -S. Oh, and A. C. C. Tan, “Machine Condition Prognosis Based on Regression Trees and One-Step-Ahead Prediction,” Mechanical Systems and Signal Processing, Vol. 22, No. 5, pp. 1179-1193, July 2008.
20. K. Kamali and L. J. Jiang, “Using Q-learning and Genetic Algorithms to Improve the Efficiency of Weight Adjustments for Optimal Control and Design Problems,” Journal of Computing and Information Science and Engineering, Vol. 7, No. 4, pp. 302-308, December 2007.
21. G. Levitin and S. V. Amari, “Optimal Load Distribution in Series Parallel Systems,” Reliability Engineering and System Safety, Vol. 94, No. 2, pp. 254-260, February 2009.
22. Y. Lei, D. Djurdjanovic, J.Ni, R.Mayor, J. Lee, and G.Xiao, “SystemLevel Optimization of Preventive Maintenance in Industrial Automation Systems,” in Proceedings of the 34th North American Manufacturing Research Conference, ASME, Vol. 34, pp. 79-86, 2006.
23. Z.Yang, D.Djurdjanovic, and J.Ni, “Maintenance Scheduling inManufacturing Systems Based on Predicted Machine Degradation,” Journal of IntelligentManufacturing Vol. 19, No. 1, pp. 87-98, February 2008.
24. V. Makis, “MultivariateBayesian ProcessControl for a Finite ProductionRun,” European Journal of Operational Research, Vol. 194, No. 3, pp. 795-806, May 2006.
25. Y. Pan, J. Chen, and L. Guo, “Robust Bearing Performance Degradation Assessment Method Based on Improved Wavelet Packet-Support Vector Data Description,” Mechanical Systems and Signal Processing, Vol. 23, No. 3, pp. 669-681, April 2009.
26. Y. Ohue, A. Yoshida, and M. Seki, “Application of the Wavelet Transform to Health Monitoring and Evaluation of Dynamic Characteristics in Gear Sets,” in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, Vol. 218, No. 1, pp. 1-11, 2004.
27. D. J. Pedregal and M. C. Carnero, “State Space Models for Condition Monitoring: A Case Study,” Reliability Engineering and System Safety, Vol. 91, No. 2, pp. 171-180, 2006.
28. D. C. Swanson, “A General Prognostic Tracking Algorithm for Predictive Maintenance,” in Proceedings of IEEE Aerospace Conference, Vol. 6, pp. 2971-2977, 2001.
29. M. Cao, K. W. Wang, L. DeVries, Y. Fujii, W. E. Tobler, G. M. Pietron, T. Tibbles, and J. McCallum, “Steady State Hydraulic Valve Fluid Field Estimator Based on Non-Dimensional Artificial Neural Network (NDANN),” Journal of Computing and Information Science and Engineering, Vol. 4, No. 3, pp. 257-270, September 2004.
30. G. Parthasarathy, S. Menon, K. Richardson, A. Jameel, D. McNamee, T. Desper, M. Gorelik, and C. Hickenbottom, “Neural Network Models for Usage Based Remaining Life Computation,” Journal of Engineering for Gas Turbines and Power, Vol. 130, No. 1, pp. 012508.1-012508.7, 2008.
31. W. Q. Wang, M. F. Golnaraghi, and F. Ismail, “Prognosis of Machine Health Condition Using Neuro-Fuzzy Systems,” Mechanical Systems and Signal Processing, Vol. 18, No. 4, pp. 813-831, July 2004.
32. C. K. Pang, F. L. Lewis, and T. H. Lee, “Modal Parametric Identification of Flexible Mechanical Structures in Mechatronic Systems,” Transactions of the Institute of Mea surement and Control, Vol. 32, No. 2, pp. 137-154, April 2010.
33. L. G. Kelly, Chapter 5, Curve Fitting and Data Smoothing, in Handbook of Numerical Methods and Applications, Addison-Wesley Inc., 1967.
34. C. K. Pang, C. Y. Lim, W. E. Wong, and F. Hong, “GUI Toolkit for Learning Advanced Magnetic Recording Technologies in Ultra-High Storage Capacity Hard Disk Drives,” submitted to Journal of Educational Technology Systems, November 2010.
35. C. K. Pang, T. S. Ng, F. L. Lewis, and T. H. Lee, “ManagingComplex Mechatronics R&D:ASystemsDesignApproach,” IEEE Transactions on Systems, Man, and Cybernetics Part A: Systems and Humans, in press.
36. C. L. Jiaa and D. A. Dornfeld, “A Self-Organizing Approach to the Prediction and Detection of Tool Wear,” ISA Transactions, Vol. 37, No. 4, pp. 239-255, September 1998.
37. J. -H. Zhou, C. K. Pang, F. L. Lewis, and Z. -W. Zhong, “Intelligent Diagnosis and Prognosis of Tool Wear Using Dominant Feature Identification,” IEEE Transactions on Industrial Informatics, Vol. 5, No. 4, pp. 454-464, November 2009.
38. J. -H. Zhou, C. K. Pang, Z. -W. Zhong, and F. L. Lewis, “Tool Wear Monitoring Using Acoustic Emissions for Dominant Feature Identification,” IEEE Transactions on Instrumentation and Measurement, Vol. 60, No. 2, pp. 547-559, February 2011.
39. J. -H. Zhou, C. K. Pang, F. L. Lewis, and Z. -W. Zhong, “Dominant Feature Identification for Industrial Fault Detection and Isolation Applications,” Expert Systems with Applications, Vol. 38, No. 8, pp. 10676-10684, August 2011.
40. C. K. Pang, Z. Y. Dong, P. Zhang, and X. Yin, “Probabilistic Analysis of Power System Small Signal Stability Region,” in Proceedings of the 2005 IEEE ICCA, TA2-4.5, pp. 503-509, Budapest, Hungary, June 27-29, 2005.
41. Z. Y. Dong, C. K. Pang, and P. Zhang, “Power System Sensitivity Analysis for Probabilistic Small Signal Stability Assessment in a Deregulated Environment,” International Journal of Control Automation and Systems (Special Issue on Recent Advances in Power System Control), Vol. 3, No. 2 (Special Edition), pp. 355-362, June 2005.
42. Z.Y. Dong, C. K. Pang, and Z.Xu., “Investigation of Probabilistic Small Signal Stability,” Electric Power Research Institute Technical Report, Product ID #1002637, September 2003 (funded by Electric Power Research Institute #1002637, EPRI, Palo Alto, CA, USA).
43. Y. Mishra, Z. Y. Dong, J. Ma, and D. J. Hill, “Induction Motor Load Impact on Power System Eigenvalue Sensitivity Analysis,” IET Generation, Transmission & Distribution, Vol. 3, No. 7, pp. 690-700, July 2009.
44. F. L. Lewis, G. R. Hudas, C. K. Pang, M. B. Middleton, and C. Mcmurrough, “Discrete Event Command and Control for Networked Teams with Multiple Missions,” in Proceedings of SPIE, Vol. 7332, 73320V, April 30, 2009.
45. C. K. Pang, G. Hudas, M. B. Middleton, C. V. Le, O. P. Gan, and F. L. Lewis, “Discrete Event Command and Control for Networked Teams with Multiple Military Missions,” submitted to The Journal of Defense Modeling and Simulation: Applications, Methodology, Technology, November 2010.
46. J. S. Bay, Funadamentals of Linear State Space Systems, McGraw-Hill International Editions, 2001.
47. D. C. Meyer, Matrix Analysis and Applied Linear Algebra, Society for Industrial and Applied Mathematics, 2001.
48. H. Paley, A First Course in Abstract Algebra, International Thomson Publishing, 1966.
49. D. C. Lay, Linear Algebra and Its Applications, 3rd Edition, Addison Wesley, 2002.
50. C. W. de Silva, Modeling and Control of Engineering System, CRC Press, 2009.
51. G. E. Shilov, Linear Algebra, Dover Publications, 1997.
52. G. Strang, Introduction to Linear Algebra, 4th Edition, Wellesley-Cambridge Press, 1998.
53. P. Gonçalves, “Behaviour Modes, Pathways and Overall Trajectories: Eigenvector and Eigenvalue Analysis of Dynamic Systems,” System Dynamics Review, Vol. 25, No. 1, pp. 35-62, 2009.
54. N. Forrester, A Dynamic Synthesis of Basic Macroeconomic Policy: Implications for Stabilization Policy Analysis, Ph.D. Thesis, MIT, Cambridge, MA, USA, 1982.
55. N. Forrester, “Eigenvalue Analysis of Dominant Feedback Loops,” in Proceedings of the 1983 International System Dynamics Conference, Plenary Session Papers, System Dynamics Society, pp. 178-202, Albany, NY, USA, 1983.
56. J. N. Warfield, “Binary Matrices in System Modeling,” IEEE Transactions on Systems, Man, and Cybernetics, Vol. 3, No. 5, pp. 441-449, September 1973.
57. B. -J. Jorgen and G. Gregory, Digraphs: Theory, Algorithms and Application, Springer, 2000.
58. D. A. Tacconi and F. L. Lewis, “A New Matrix Model for Discrete Event Systems:Application to Simulation,” IEEE Control Systems Magazine, Vol. 17, No. 5, pp. 62-71, October 1997.
59. V. Giordano, P. Ballal, F. L. Lewis, B. Turchiano, and J. B. Zhang, “Supervisory Control of Mobile Sensor Networks:Math Formulation, Simulation, and Implementation,” IEEE Transactions on Systems, Man, and Cybernetics: Part B, Vol. 36, No. 4, pp. 806-819, August 2006.
60. T. Murata, “Petri Nets: Properties, Analysis and Applications,” in Proceedings of IEEE, Vol. 77, No. 4, pp. 541-580, April 1989.
61. T.H. Yan, X.D. Chen, and R. M. Lin, “Servo System Modeling and Reduction ofMechatronic System Through Finite Element Analysis for Control Design,” Mechatronics, Vol. 18, No. 9, pp. 466-474, November 2008.
62. T. Iwasaki, “Integrated System Design by Separation,” in Proceedings of the 1999 IEEE International Conference on Control Applications, pp. 97-102, Kohala Coast, HI, USA, August 22-27, 1999.
63. S. Hara, “Dynamical System Design from Control Perspective,” in Proceedings of the SICE-ICASE International Joint Conference 2006, Bexco, Busan, Korea, October 18-21, 2006.
64. M. Grossard, C. Rotinat-Libersa, N. Chaillet, and M. Boukallel, “Mechanical and Control-Oriented Design of aMonolithic PiezoelectricMicrogripper Using a New Topological Optimization Method,” IEEE/ASME Transactions on Mechatronics, Vol. 14, No. 1, pp. 32-45, February 2009.
65. K. Chen, J. Bankston, J. H. Panchal, and D. Schaefer, “A Framework for Integrated Design of Mechatronic Systems,” in Collaborative Design and Planning for Digital Manufacturing, (L.Wang and A. Y. C. Nee, Eds.), Springer, London, pp. 37-70, 2009.
66. N. S. Argyres and B. S. Silverman, “R&D, Organization Structure and the Development of Corporate Technological Knowledge,” Strategic Management Journal, Vol. 25, pp. 929-958, 2004.
67. T. L. Griffith and J. E. Sawyer, “Research Team Design and Management for Centralized R&D,” IEEE Transactions on Engineering Management, in press.
68. J. Lin and T. S.A. Ng, “A Systems Approach forManaging Concurrent Product Development Projects,” inProceedings of the 3rd Asia-PacificConference on SystemsEngineering (APCOSE), Singapore, July 20-23, 2009.
69. K. Wucherer, “On Track For The Intelligent Factory,” presented at Siemens Press Con ference at the Hanover Fair, April 16, 2007.
70. T. E. Graedel and B. R. Allenby, Industrial Ecology, Prentice Hall, New Jersey, NJ, USA, 1995.
71. C. K. Pang, F. L. Lewis, S. S. Ge, G. Guo, B. M. Chen, and T. H. Lee, “Singular Perturbation Control for Vibration Rejection in HDDs Using the PZT Active Suspension as Fast Subsystem Observer,” IEEE Transactions on Industrial Electronics, Vol. 54, No. 3, pp. 1375-1386, June 2007.
72. P. Eykhoff, System Identification--Parameter and State Estimation, New York: Wiley, 1981.
73. L. Ljung, System Identification: Theory For The User, 2nd Edition, PTR Prentice Hall, Upper Saddle River, NJ, 1999.
74. I. Kollár, “Frequency Domain System Identification Toolbox for Use with MATLAB,” MATLAB Manual, 2001.
75. T. Mckelvey, H. Akcay, and L. Ljung, “Subspace-Based Identification of Infinite-Dimensional Multivariable Systems from Frequency-Response Data,” Automatica, Vol. 32, No. 6, pp. 885-902, 1996.
76. B. M. Chen, T.H. Lee, K. Peng, and V. Venkataramanan, Hard Disk Drive Servo Systems, 2nd Edition, Springer, New York, (Advances in Industrial Control Series), 2006.
77. M. Kawafuku, K. Otsu, H. Hirai, and M. Kobayashi, “High Performance Control Design of HDD Based on Precise System Modeling using Differential Iteration Method,” in Proceedings of the 2003 American Control Conference, pp. 4341-4346, Denver, CO, USA, June 4-6, 2003.
78. M. Kawafuku, K. Otsu, M. Iwasaki, H. Hirai, M. Kobayashi, and A. Okuyama, “High-Precision PositioningControl forHardDiskDrives: 1stReport:High-Precision Simulator Using Differential Iteration Method,” Electrical Engineering in Japan, in press.
79. M. H. Richardson and D. L. Formenti, “Parameter Estimation from Frequency Response Measurements Using Rational Fraction Polynomials,” in Proceedings of the 1st IMAC Conference, pp. 1-15, Orlando, FL, USA, November 8-10, 1982.
80. M. H. Richardson and D.L. Formenti, “GlobalCurve Fitting of FrequencyResponseMeasurements Using the Rational Fraction Polynomial Method,” in Proceedings of the 3rd IMAC Conference, pp. 1-8, Orlando, FL, USA, January 28-31, 1985.
81. T. Yamaguchi, “Modelling and Control of a Disk File Head-Positioning System,” in Proceedings of the I MECH E Part I Journal of Systems & Control Engineering, Vol. 215, No. 6, pp. 549-568, 2001.
82. C. K. Pang, S. C. Tam, G. Guo, B. M. Chen, F. L. Lewis, T. H. Lee, and C. Du, “Improved Disturbance Rejection with Online Adaptive Pole-Zero Compensation on a Φ-Shaped PZTActive Suspension,” MicrosystemTechnologies, Vol. 15, Nos. 10-11, pp. 1499-1508, October 2009.
83. C. K. Pang, D. Wu, G. Guo, T. C. Chong, and Y. Wang, “Suppressing Sensitivity Hump in HDD Dual-Stage Servo Systems,” Microsystem Technologies, Vol. 11, Nos. 8-10, pp. 653-662, August 2005.
84. G. F. Franklin, J. D. Powell, and M. L. Workman, Digital Control of Dynamic Systems, 3rd Edition, Addison-Wesley, 1998.
85. INCOSE, Systems Engineering Handbook, v3.1, INCOSE, 2007.
86. NASA, Systems Engineering Handbook, NASA/SP-2007-6105, NASA, 2007.
87. A. Sage, Systems Engineering, Wiley IEEE, 1992.
88. A. Sage and S.R.Olson, “Modeling and Simulation in Systems Engineering,” Simulation, Vol. 76, No. 2, pp. 90-91, 2001.
89. A. Kossiakoff and W. N. Sweet, Systems Engineering Principles and Practice, Wiley-Interscience, 2002.
90. B. Blanchard, System Engineering Management, 4th Edition, Wiley, 2008.
91. C. S. Wasson, System Analysis, Design, and Development: Concepts, Principles, and Practices, Wiley Series in Systems Engineering and Management, Wiley-Interscience, 2005.
92. Y. Akao (Ed.), Quality Function Deployment: Integrating Customer Requirements Into Product Design, Productivity Press, Portland, OR, USA, 1990.
93. J. R. Hauser and D. Clausing, “The House of Quality,” Harvard Business Review, pp. 63-73, May-June 1988.
94. V. Kotov, “Systems-of-Systems as Communicating Structures,” Hewlett Packard Computer Systems Laboratory Paper, HPL-97-124, pp. 1-15, 1997.
95. S. J.Luskasik, “Systems, Systems-of-Systems, and theEducation ofEngineers,” Artificial Intelligence for Engineering Design, Analysis, and Manufacturing, Vol. 12, No. 1, pp. 55-60, 1998.
96. Y. Rolain, R. Pintelon, K. Q. Xu, and H. Vold, “On the Use of Orthogonal Polynomials in High Order Frequency Domain System Identification and its Application to Modal Parameter Estimation,” in Proceedings of the 33rd IEEE Conference on Decision and Control, pp. 3365-3373, Lake Buena Vista, FL, USA, December 14-16, 1994.
97. T.Atsumi, “Head-PositioningControl ofHardDiskDrivesThrough the IntegratedDesign of Mechanical and Control Systems,” International Journal of Automation Technology, Vol.3, No.3, pp. 277-285, 2009.
98. T. Atsumi, S. Nakagawa, T. Yamaguchi, and H. Yosuke, “High-Bandwidth Servo Design forShaping theMechanicalResonance of theActuator inHardDiskDrives,” Transactions of the Japan Society of Mechanical Engineers: C, Vol. 67, No. 664, pp. 3905-3910, 2001.
99. T. Semba, F. -Y. Huang, and M. T. White, “Integrated Servo/Mechanical Design of HDD Actuators and Estimation of the Achievable Bandwidth,” IEEE Transsactions on Magnetics, Vol. 39, No. 5, No. 2, pp. 2588-2590, September 2003.
100. NHK SPRING, http://www.nhkspg.co.jp/eng/prod/disk.html [Online].
101. C. K. Pang, G. Guo, B. M. Chen, and T. H. Lee, “Self-Sensing Actuation for Nanopositioning and Active-Mode Damping in Dual-Stage HDDs,” IEEE/ASME Transactions on Mechatronics, Vol. 11, No. 3, pp. 328-338, June 2006.
102. M. Kobayashi, S. Nakagawa, and S. Nakamura, “A Phase-Stabilized Servo Controller for Dual-Stage Actuators in Hard-Disk Drives,” IEEE Transactions on Magnetics, Vol. 39, No. 2, pp. 844-850, March 2003.
103. D. T. Allen and D. R. Shonnard, Green Engineering: Environmentally Conscious Design of Chemical Processes, Prentice Hall, New Jersey, NJ, USA, 2002.
104. R. J. Kuo and P. H. Cohen, “Multi-Sensor Integration for On-Line ToolWear Estimation Through Radial Basis Function Networks and Fuzzy NeuralNetwork,” Neural Networks, Vol. 12, No. 2, pp. 355-370, March 1999.
105. J.Dong, K.V.R. Subrahmanyam, Y. S.Wong, G. S.Hong, and A.R.Mohanty, “Bayesian-Inference-Based Neural Networks for ToolWear Estimation,” The International Journal of Advanced Manufacturing Technology, Vol. 30, Nos. 9-10, pp. 797-807, October 2006.
106. Y. S. Tarng, “Study of Milling Cutting Force Pulsation Applied to the Detection of Tool Breakage,” International Journal of Machine Tools and Manufacture, Vol. 30, No. 4, pp. 651-660, 1990.
107. I. N. Tansel and C. McLaughlin, “Detection of Tool Breakage in Milling Operations -I. The Time Series Analysis Approach,” International Journal of Machine Tools and Manufacture, Vol. 33, No. 4, pp. 531-544, 1993.
108. C. S. Leem, D. A. Dornfeld, and S. E. Dreyfus, “Customized Neural Network for Sensor Fusion in On-Line Monitoring of Cutting Tool Wear,” Journal of Engineering for Industry, Vol. 117, No. 2, pp. 152-159, 1995.
109. X. Li and X. Yao, “Multi-Scale Statistical Process Monitoring in Machining,” IEEE Transactions on Industrial Electronics, Vol. 52, No. 3, pp. 924-927, June 2005.
110. J. Sun, G. S. Hong, M. Rahman, and Y. S.Wong, “Identification of Feature Set for Effective Tool Condition Monitoring by Acoustic Emission Sensing,” International Journal of Production Research, Vol. 42, No. 5, pp. 901-918, 2004.
111. S. Orhan, A. O. Er, N. Camucu, and E. Aslan, “Tool Wear Evaluation by Vibration Analysis During EndMilling of AISI D3 ColdWork Tool Steel with 35 HRC Hardness,” NDT & E International, Vol. 40, No. 2, pp. 121-126, March 2007.
112. E.Haddadi, M. R. Shabghard, and M. M. Ettefagh, “Effect of Different Tool Edge Conditions onWear Detection by Vibration Spectrum Analysis in Turning Operation,” Journal of Applied Science, Vol. 8, No. 21, pp. 3879-3886, 2008.
113. X. Li, A. Djordjevich, and P. K. Venuvinod, “Current-Sensor-Based Feed Cutting Force Intelligent Estimation and Tool Wear Condition Monitoring,” IEEE Transactions on Industrial Electronics, Vol. 47, No. 3, pp. 697-702, June 2000.
114. G. E. Dapos, “Tool Condition Monitoring and Machining Process Control,” in Proceedings of the 15th Annual Conference of IEEE IECON apos, Vol. 3, Nos. 6-10, pp. 652-657, November 6-10, 1989.
115. T.W. Liao, Q. Zou, L. Mann, and M. E. Zodhi, “Online PCBN Tool Failure Monitoring System Based on Acoustic Emission Signatures,” IEE Proceedings: Science, Measurement and Technology, Vol. 142, No. 5, pp. 404-410, September 1995.
116. J. -S.Kim, M. -C.Kang, B. -J. Ryu, and Y. -K. Ji, “Development of an On-Line Tool-Life Monitoring System Using Acoustic Emission Signals in Gear Shaping,” International Journal of Machine Tools & Manufacture, Vol. 39, No. 11, pp. 1761-1777, November 1999.
117. G. Pontuale, F. A. Farrelly, A. Petri, and L. Pitolli, “A Statistical Analysis of Acoustic Emission Signals for Tool ConditionMonitoring (TCM),” Acoustical Society of America, Vol. 4, No. 1, pp. 13-18, January 2003.
118. X. Chen and B. Li, “Acoustic Emission Method for Tool ConditionMonitoring Based on Wavelet Analysis,” The International Journal of Advanced Manufacturing Technology, Vol. 33, Nos. 9-10, pp. 968-976, July 2007.
119. P. S. Pai and P.K. R. Rao, “Acoustic Emission Analysis for ToolWear Monitoring in Face Milling,” International Journal of Production Research, Vol. 40, No. 5, pp. 1081-1093, 2002.
120. Y. M. Niu, Y. S. Wong, and G. S. Hong, “An Intelligent Sensor System Approach for Reliable Tool Flank Wear Recognition,” The International Journal of Advanced Manufacturing Technology Vol. 14, No. 2, pp. 77-84, February 1998.
121. H. V. Ravindra, Y. G. Srinivasa, and R. Krishnamurthy, “Acoustic Emission For Tool Condition Monitoring in Metal Cutting,” Wear, Vol. 212, No. 1, pp. 78-84, November 1997.
122. E. Kannatey-Asibu, Jr., and D. A. Dornfeld, “A Study of Tool Wear Using Statistical Analysis of Metal Cutting Acoustic Emission,” Wear, Vol. 76, pp. 247-261, 1982.
123. K. P. Zhu, G. S. Hong, and Y. S. Wong, “A Comparative Study of Feature Selection for HiddenMarkovModel-BasedMicro-Milling ToolWearMonitoring,” Machining Science and Technology, Vol. 12, No. 3, pp. 348-369, July 2008.
124. S. Binsaeid, S. Asfour, S. Cho, and A. Onar, “Machine Ensemble Approach for Simultaneous Detection of Transient and Gradual Abnormalities in End Milling Using Multisensor Fusion,” Journal of Materials Processing Technology, Vol. 209, No. 10, pp. 4728-4738, June 2009.
125. P. Bhattacharyyaa, D. Senguptaa, and S. Mukhopadhyayb, “Cutting Force-Based Real-Time Estimation of ToolWear in FaceMilling Using a Combination of Signal Processing Techniques,” Mechanical Systems and Signal Processing, Vol. 21, No. 6, pp. 2665-2683, August 2007.
126. I. T. Jolliffe, Principal Component Analysis, Springer-Verlag, 1986.
127. G. P. McCabe, “Principal Variables,” Technometrics, Vol. 26, No. 2, pp. 127-134, May 1984.
128. H. L. Tan, N. S. Chaudhari, and J. H. Zhou, “Time Series Prediction Using Principal Feature Analysis,” in Proceedings of the 3rd IEEE Conference on Industrial Electronics and Applications, pp. 292-297, Singapore, June 3-5, 2008.
129. I. Cohen, Q. Tian, X. S. Zhou, and T. S. Huang, “Feature Selection Using Principal Feature Analysis,” in Proceedings of the 15th International Conference on Information Processing, Rochester, NY, USA, September 22-25, 2002.
130. Y. Lu, I. Cohen, X. S. Zhou, Q. Tian, and T. S.Huang, “Feature Selection Using Principal Feature Analysis,” in Proceedings of the 15th International Conference on Multimedia, pp. 301-304, Augsburg, Germany, September 25-29, 2007.
131. G. A. Fodor, “From the Editor-in-Chief Industrial Informatics: Predicting with Abstractions,” IEEE Transactions on Industrial Informatics, Vol. 1, No. 1, pp. 3, February 2005.
132. F. L. Lewis, S. Jagannathan, and A. Yeşildirek, Neural Network Control of Robot Manipulators and Nonlinear Systems, CRC Press, 1998.
133. S. Simani, “Identification and Fault Diagnosis of a Simulated Model of an Industrial Gas Turbine,” IEEE Transactions on Industrial Informatics, Vol. 1, No. 3, pp. 202-216, August 2005.
134. D. B. Percival and A. T.Walden, Wavelet Methods for Time Series Analysis, Cambridge University Press, 2000.
135. S.Gunn, “SupportVector Machines forClassification and Regression,” TechnicalReport, ISIS, Department of Electronics and Computer Science, University of Southampton 1998.
136. R. Gong, S. H. Huang, and T. Chen, “Robust and Efficient Rule Extraction Through Data Summarization and Its Application in Welding Fault Diagnosis,” IEEE Transactions on Industrial Informatics, Vol. 4, No. 3, pp. 198-206, August 2008.
137. S. P. Lloyd, “Least Squares Quantization in PCM,” IEEE Transactions on Information Theory (Special Issue on Quantization), Vol. 28, No. 2, pp. 129-137, March 1982.
138. T. Kanungo, D. M. Mount, N. Netanyahu, C. Piatko, R. Silverman, and A. Y. Wu, “An Efficient K-Means Clustering Algorithm: Analysis and Implementation,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol. 24, No. 7, pp. 881-892, July 2002.
139. J. Yan, M. Koc, and J. Lee, “A Prognostic Algorithm for Machine Performance Assessment and its Application,” Production Planning & Control, Vol. 15, No. 8, pp. 796-801, December 2004.
140. G. Zhang, S. Lee, N. Propes, Y. Zhao, and G. Vachtsevanos, “A Novel Architecture for an Integrated Fault Diagnostic/Prognostic System,” AAAI Technical Report, pp. 75, SS-02-03. 2002.
141. A. Muller, A. C. Marquez, and B. Lung, “On the Concept of E-Maintenance: Review and Current Research,” Reliability Engineering and System Safety, Vol. 93, No. 8, pp. 165-1187, August 2008.
142. T. Han and B. -S. Yang, “Development of an E-Maintenance System Integrating Advanced Techniques,” Computers in Industry, Vol. 57, No. 6, pp. 569-580, August 2006.
143. B. Tao, H. Ding, and Y. L. Xiong, “IP Sensor and its Distributed Networking Application in E-Maintenance,” in Proceedings of the 2003 IEEE International Conference on Systems, Man, and Cybernetics, Vol. 4, pp. 3858-3863, Washington, DC, USA, October 5-8, 2003.
144. M. Koç and J. Lee, “A System Framework for Next-Generation E-Maintenance System,” in Proceedings of Second International Symposium on Environmentally Conscious Design and Inverse Manufacturing, Tokyo, Japan, 2001.
145. W. Zhang, W. Halang, and C. Diedrich, “An Agent-Based Platform for Service Integration in E-Maintenance,” in Proceedings of the 2003 IEEE International Conference on Industrial Technology, Vol. 1, No. 10-12, pp. 426-433, December 2003.
146. A. C. Marquez and J. M. D. Gupta, “Contemporary Maintenance Management: Process, Framework and Supporting Pillars,” Omega, Vol. 34, No. 3, pp. 313-326, June 2006.
147. W. Zhou, T. G. Habetler, and R. G. Harley, “Bearing Condition Monitoring Methods for Electric Machines: A General Review,” in Proceedings of the IEEE International Symposium on Diagnostics for Electric Machine, pp. 3-6, Cracow, Poland, September 6-8, 2007.
148. P. D. McFadden and J. D. Smith, “Vibration Monitoring of Rolling Element Bearings By the High Frequency Resonance Technique--A Review,” Tribology International, Vol. 17, pp. 3-10, 1984.
149. H.Qiu, H. Luo, and N. Eklund, “Draft:On-BoardBearing Prognostics inAircraft Engine:Enveloping Analysis or FFT?" in Proceedings of the IDETC/CIE, pp. 1-7, San Diego, CA, USA, August 30-September 2, 2009.
150. Y. Lei, Z. He, and Y. Zi, “Application of an Intelligent ClassificationMethod to Mechanical Fault Diagnosis,” Expert Systems with Applications, Vol. 36, No. 6, pp. 9941-9948, August 2009.
151. Y. Lei, M. J. Zuo, Z. He, and Y. Zi, “A Multidimensional Hybrid Intelligent Method for Gear Fault Diagnosis,” Expert Systems with Applications, Vol. 37, No. 2, pp. 1419-1430, March 2010.
152. J. C. Bezdek, Pattern Recognition With Fuzzy Objective Function Algorithms, Plenum Press, New York, 1981.
153. L. J. Heyer, S. Kruglyak, and S. Yooseph, “Exploring Expression Data: Identification and Analysis of Coexpressed Genes,” Genome Research, Vol. 9, No. 11, pp. 1106-1115, November 1999.
154. J. -H. Wang, J. -D. Rau, and W. -J. Liu, “Two-Stage Clustering via Neural Networks,” IEEE Transactions on Neural Networks, Vol. 14, No. 3, pp. 606-615, May 2003.
155. J. MacQueen, “Some Methods for Classification and Analysis of Observations,” in Proceedings of the Fifth Berkeley Symposium on Mathematics, Statistics, and Probability, Vol. 1, pp. 281-297, University of California Press, 1967.
156. Y. Altintas and I. Yellowley, “In-Process Detection of Tool Failure in Milling Using Cutting Force Models,” Journal of Engineering for Industry, Vol. 111, pp. 149-157 May 1989.
157. Y. Altintas, “In-Process Detection of Tool Breakage Using Time Series Monitoring of Cutting Forces,” International Journal of Machine Tools and Manufacture, Vol. 28, No. 2, pp. 157-172, 1988.
158. J. H. Tarn and M. Tomizuka, “On-Line Monitoring of Tool and Cutting Conditions in Milling,” Journal of Engineering for Industry, Transactions of the ASME, Vol. 111, pp. 206-212, August 1989.
159. D. Y. Zhang, Y. T. Han, and D. C. Chen, “On-Line Detection of Tool Breakages Using Telemetering of Cutting Forces in Milling,” International Journal of Machine Tools and Manufacture, Vol. 35, No. 1, pp. 19-27, 1995.
160. M. A. Elbestawi, J. Marks, and T. A. Papazafiriou, “Process Monitoring in Milling by Pattern Recognition,” Mechanical Systems and Signal Processing, Vol. 3, No. 3, pp. 305-315, 1989.
161. Y. S. Tarng, Y.W. Hseih, and S. T. Hwang, “Sensing Tool Breakage in Face Milling with a Neural Network,” International Journal of Machine Tools and Manufacture, Vol. 34, No. 3, pp. 341-350, 1994.
162. X. Q. Chen, H. Zeng, and W. Dietmar, “In-Process Tool Monitoring through Acoustic Emission Sensing,” SIMTech Technical Report (AT/01/014/AMP), 2001.
163. A. E. Diniz, J. J. Liu, and D. A. Dornfeld, “Correlating Tool Life, ToolWear and Surface Roughness by Monitoring Acoustic Emission in Finish Turning,” Wear, Vol. 152, No. 2, pp. 395-407, 1992.
164. K. Sunilkumar, L. Vijayaraghavan, and R. Krishnamurthy, “In Process Wear and Chip-Form Monitoring in Face Milling Operation Using Acoustic Emission,” Journal of Materials Processing Technology, Vol. 44, Nos. 3-4, pp. 207-214, 1994.
165. P. Palanisamy, I. Rajendran, and S. Shanmugasundaram, “Prediction of ToolWear Using Regression and ANN Models in End-Milling Operation,” The International Journal of Advanced Manufacturing Technology, Vol. 37, Nos. 1-2, pp. 29-41, April 2008.
166. Z. Chen and X. M. Zhang, “Monitoring of Tool Wear Using Feature Vector Selection and Linear Regression,” Lecture Notes in Computer Science, Advances in Natural Computation, Vol. 3611, pp. 1-6, 2005.
167. P. Dang, F. M. Ham, F. L. Lewis, and H. Stephanou, “A Two-Stage Neural Network for Expression Classification,” submitted to Neurocomputing, April 2009.
168. F. M. Ham and I. Kostanic, Principles of Neurocomputing for Science and Engineering, McGraw-Hill, New York, USA, 2001.
169. SpectraQuest, http://www.spectraquest.com/Products/simulators_pro.shtml [Online].
170. A.Widodo, B. -S. Yang, D. -S. Gu, and B. -K. Cho, “Intelligent Fault Diagnosis System of Induction Motor Based on Transient Current Signal,” Mechatronics, Vol. 19, No. 5, pp. 680-689, August 2009.
171. T. I. Liu, E. J. Ko, and S. L. Sha, “Intelligent Monitoring of Tapping Tools,” Journal of Materials Shaping Technology, Vol. 8, No. 4, pp. 249-254, December 1990.
172. C. W. De Silva, Vibration: Fundamentals and Practice, 2nd Edition, CRC Press, 2006.
173. M.Norton and D.Karczub, Fundamentals of Noise and Vibration Analysis for Engineers, 2nd Edition, Cambridge, October 2003.
174. M. E. H. Benbouzid, “A Review of Induction Motors Signature Analysis as a Medium for Faults Detection,” IEEE Transactions on Industrial Electronics, Vol. 47, No. 5, pp. 984-993, October 2000.
175. K. T. Chung and A.Geddam, “AMulti-Sensor Approach to theMonitoring of EndMilling Operations,” Journal of Materials Processing Technology, Vol. 139, Nos. 1-3, pp. 15-20, August 2003.
176. N. Tandon and A. Choudhury, “A Review of Vibration and Acoustic MeasurementMethods for the Detection of Defects in Rolling Element Bearings,” Tribology International, Vol. 32, No. 8, pp. 469-480, August 1999.
177. R. C. Burchett and G. T. Heydt, “Probabilistic Methods for Power System Dynamic Stability Studies,” IEEE Transactions on Power Apparatus and Systems, Vol. PAS-97, No. 3, pp. 695-702, May-June 1978.
178. K.W.Wang, C.Y. Chung, C.T.Tse, and K.M.Tsang, “Improved Probabilistic Method for Power System Dynamic Stability Studies,” IEE Proceedings Generation, Transmission & Distribution, Vol. 147, No. 1, pp. 37-43, January 2000.
179. F. L. Pagola, I. J. Perez-Arriaga, and G. C. Verghese, “On Sensitivities, Residues and Participations: Applications to Oscillatory Stability Analysis and Control,” IEEE Transactions on Power Systems, Vol. 4, No. 1, pp. 278-285, February 1989.
180. J. E. Van Ness and J. M. Boyle, “Sensitivities of Large Multiple-Loop Control Systems,” IEEE Transactions on Automatic Control, Vol. AC-10, pp. 308-315, 1965.
181. K.W.Wang, C. T. Tse, X. Y. Bian, and A. K. David, “Probabilistic Eigenvalue Sensitivity Analysis and PSS Design in Multimachine Systems,” IEEE Transactions on Power Systems, Vol. 18, No. 1, pp. 1439-1445, November 2003.
182. E. Chiado, F. Gagliardi, and D. Lauria, “Probabilistic Approach to Transient Stability Evaluation,” IEE Proceedings Generation, Transmission & Distribution, Vol. 141, No. 5, pp. 537-544, September 1994.
183. G. J. Anders, Probability Concepts in Electric Power Systems, JohnWiley& Sons, 1990.
184. EPRI, “Moving Toward Probabilistic Reliability Assessment Methods,” Technical Report 1002639, 2003.
185. EPRI, “Issues and Solutions: North American Grid Planning (2000-2005),” Technical Report 1000058, 2006.
186. R. Billinton and R. N. Allan, Reliability Evaluation of Power Systems, 2nd Edition, Plenum Press, 1996.
187. R. Billinton and R. N. Allan, Reliability Evaluation of Engineering Systems: Concepts and Techniques, 2nd Edition, Plenum Press, 1992.
188. D. J.Hill and I.A.Hiskens, “DynamicAnalysis ofVoltageCollapse in Power Systems,” in Proceedings of the 31st IEEEConference onDecision and Control, Vol. 3, pp. 2904-2909, 1992.
189. D. Karlsson and D. J. Hill, “Modeling and Identification of Nonlinear Dynamic Loads in Power System,” IEEE Transactions on Power Systems, Vol. 9, No. 1, pp. 157-166, 1994.
190. IEEE Task Force on Load Representation for Dynamic Performance System Dynamic Performance Subcommittee and Power SystemEngineering Committee, “Standard Load Models for Power Flow and Dynamic Performance Simulation,” IEEE Transactions on Power Systems, Vol. 10, No. 3, pp. 1302-1313, 1995.
191. L. Pereira, D. Kosterev, P. Mackin, D. Davies, and J. Undrill, “An Interim Dynamic InductionMotor Model for Stability Studies in theWSCC,” IEEE Transactions on Power Systems, Vol. 17, No. 4, pp. 1108-1115, November 2002.
192. J. Ma, Z. Y. Dong, R. He, and D. J. Hill, “System Energy Analysis Incorporating Comprehensive Load Characteristics,” IEE Proceedings Generation, Transmission & Distribution, Vol. 1, No. 6, pp. 855-863, 2007.
193. J. Arrillaga and N. R. Watson, Computer Modeling of Electrical Power Systems 2nd Edition, John Wiley & Sons, 2001.
194. C. Y. Chung, K.W.Wang, C. K. Cheung, C. T. Tse, and A. K. David, “Machine and Load Modeling in Large Scale Power Industries” in Proceedings of Workshop on Dynamic Modeling Control Applications for Industries, pp. 7-15, Vancouver, BC, Canada, April 30-May 1, 1998.
195. M. B. Durić, Z. M. Radojević, and E. D. Turković, “A Reduced Order Multimachine Power SystemModel Suitable for Small Signal Stability Analysis” Electrical Power and Energy Systems, Vol. 20, No. 5, pp. 369-374, 1998.
196. J. D. Glover and M. Sarma, Power System Analysis and Designs, 2nd Edition, PWS Publishing Company, 1994.
197. S. W. Heuins and R. Herman, “A Probabilistic Model for Residentila Consumer Load” IEEE Transactions on Power Systems, Vol. 13, No. 3, pp. 621-625, August 2002.
198. IEEECommitteeReport, “Computer Representation ofExcitation Systems,” IEEE Transactions on Power Apparatus and Systems, Vol. 87, No. 6, pp. 1460-1464, 1968.
199. IEEE Committee Report, “Dynamic Models for Steam and Hydro Turbines in Power System Studies,” IEEE Transactions on Power Apparatus and Systems, Vol. 92, No. 6, pp. 1904-1915, 1973.
200. IEEE Committee Report, “IEEE Guide for Synchronous Generator Modeling Practices in Stability Analyses,” IEEE Standards, pp. 1110-1991, 1991.
201. P. Kundur, Power System Stability and Control, McGraw-Hill Inc., 1994.
202. K. Maslo and J.Andel, “Gas TurbineModelUsing inDesign ofHeat and Power Stations,” in Proceedings of the 2001 IEEE Porto Power Tech Conference, Vol. 4, Porto, Portugal, September 10-13, 2001.
203. J. E. Van Ness and W. F. Goddard, “Formation of the Coefficient Matrix of a Large Dynamic System,” IEEE Transactions on Power Apparatus and Systems, Vol. 87, No. 1, pp. 80-83, January 1968.
204. M. Weedy and B. J. Cory, Electrical Power Systems, 4th Edition, John Wiley & Sons Ltd., 1999.
205. Y. V. Makarov and Z. Y. Dong, Eigenvalues and Eigenfunctions, Volume Computational Science & Engineering, Encyclopedia of Electrical and Electronics Engineering, John Wiley & Sons, 1998.
206. H. K. Khalil, Nonlinear Systems, 2nd Edition, Prentice-Hall, Upper Saddle River, New Jersey, USA, 1996.
207. R. Seydel, From Equilibrium to Chaos, Practical Bifurcation and Stability Analysis, 2nd Edition, Springer-Verlag, New York, USA, 1994.
208. Y. V. Makarov, Z. Y. Dong, and D. J. Hill, “A General Method for Small Signal Stability Analysis,” in Proceedings of the International Conference of Power Industry Computer Applications, pp.280-286, Columbus, OH, USA, May 11-16, 1997.
209. Y. V. Makarov, V. A. Maslennikov, and D. J. Hill, “Calculation of Oscillatory Stability Margins in the Space of Power System Controlled Parameters,” in Proceedings of the International Symposium of Electric Power Engineering, pp. 416-422, Stockholm, Sweden, June 18-22, 1995.
210. C. -W. Tan, M. Varghese, P. Varaiya, and F. F. Wu, “Bifurcation, Chaos and Voltage Collapse in Power Systems,” D. J. Hill (ed.), Special Issue on Nonlinear Phenomena in Power Systems: Theory and Practical Implications, IEEE Proceedings, Vol. 83, No. 11, pp. 1484-1496, November 1995.
211. H. Z. El-Din and R. T. H. Alden, “Second Order Eigenvalue Sensitivities Applied to Power System Dynamics,” IEEE Transactions on Power Systems, Vol. 96, No. 6, pp. 1928-1936, November 1977.
212. A. Saltelli, K. Chan, and E. M. Scott, Sensitivity Analysis, JohnWiley& Sons Ltd., 2000.
213. K.W. Wang, C. Y. Chung, C. T. Tse, and K. M. Tsang, “Probabilistic Eigenvalue Sensitivity Indices for Robust PSS Site Selection,” IEE Proceedings Generation, Transmission & Distribution, Vol. 148, No. 6, pp. 603-609, November 2001.
214. K. W. Wang, C. T. Tse, and K. M. Tsang, “Algorithm for Power System Dynamic Stability Studies Taking Account of the Variation of Load Power,” Electric Power Systems Research, Vol. 46, pp. 221-227, 1998.
215. H. Cramer, Mathematical Methods of Statistics, Princeton University Press, 1966.
216. A. Papoulis, Probability, Random Variables and Stochastic Processes, McGraw-Hill Inc., 1984.
217. M. G. Kendall, “Proof of Relations Connected with the Tetrachoric Series and its Generalization,” Biometrika, Vol. 32, No. 2, pp. 196-198, October 1941.
218. J. M. Undrill and T. F. Laskowski, “Model Selection and Data Assembly for Power System Simulation,” IEEE Transactions on Power Apparatus and Systems, PAS-01, pp. 3333-3341, 1982.
219. W. A. Kao, “TheEffect ofLoad Models on Unstable LowFrequency OscillationDamping in Tai Power System Experience w/wo Power System Stabilizers,” IEEE Transactions on Power Systems, Vol. 16, Vol. 3, pp. 463-472, August 2001.
220. K. Morison, H. Hamadani, and L.Wang, “Practical Issues of Load Modeling for Voltage Stability Studies,” in Proceedings of the 2003 IEEE PES General Meeting, Toronto, Canada, July 2003.
221. J. Ma, D.Han, R.M.He, Z.Y. Dong, and D. J.Hill, “Research on Identifiability of Equivalent Motor in Composite Load Model,” in Proceedings of Power Tech 2007, Lausanne, Switzerland, July 1-5, 2007.
222. J. Ma, R. He, and D. J. Hill, “Load Modeling by Finding Support Vectors of Load Data from Field Measurements,” IEEE Transactions on Power Systems, Vol. 21, No. 2, pp. 726-735, 2006.
223. EPRI, “Advanced Load Modelling,” Technical Report 1007318, 2002.
224. J. Hockenberry and B. Lesieutre, “Evaluation of Uncertainty in Dynamic Simulation of Power System Models: The Probabilistic Collocation Method,” IEEE Transactions on Power Systems, Vol. 15, No. 1, pp. 299-306, 2000.
225. E. E. S. Lima and L. F. J. Fernandes, “Assessing Eigenvalue Sensitivities,” IEEE Transactions on Power Systems, Vol. 15, No. 1, pp. 299-306, 2000.
226. J. V. Milanovic, I. A. Hiskens, and V. A. Maslennikov, “Ranking Loads in Power Systems-Comparison of Different Approaches,” IEEE Transactions on Power Systems Vol. 14, No. 2, pp. 614-619, 1999.
227. S. -H. Li, H. -D. Chiang, and S. Liu, “Analysis of Composite Load Models on Load Margin of Voltage Stability,” in Proceedings of the International Conference on Power System Technology, pp. 1-7, Chongqing, China, October 22-26, 2006.
228. C. W. Taylor, Power System Voltage Stability, McGraw-Hill, 1994.
229. Z. Y. Dong, Y. Mishra, and P Zhang, “Power System Sensitivity Analysis Considering Induction Motor Loads,” in Proceedings of the 8th IET International Conference on Advances in Power System Control, Operation, and Management, Kowloon, Hong Kong SAR, November 8-11, 2009.
230. P. W. Sauer and M. A. Pai, Power System Dynamics and Stability, Pearson Education, 2003.
231. Z. Y. Dong, D. J. Hill, and Y. Guo, “A Power System Control Scheme Based on Security Visualisation in Parameter Space,” International Journal of Electrical Power and Energy Systems, Vol. 27, No. 7, pp. 488-495, 2005.
232. D. J. Hill and Z. Y. Dong, “Nonlinear Computation and Control for Small Disturbance Stability,” Invited Paper, IEEE/PES SM 2000 Panel Session on Recent Applications of Linear Analysis Techniques, 2000.
233. J. Ma, D. Han, R. M. He, Z. Y. Dong, and D. J. Hill, “Reducing Identified Parameters of Measurement Based Composite Load Model,” IEEE Transactions on Power Systems, Vol. 23, No. 1, pp. 76-83, 2008.
234. F. L. Lewis, D. A. Tacconi, O. C. Pastravanu, and A. Gurel, “Method and Apparatus for Testing and Controlling a Flexible Manufacturing System,” US Patent No. 6,185,469 B1, 6th February 2001.
235. B. Harris, D. J. Cook, and F. L. Lewis, “Automatically Generating Plans for Manufacturing,” Journal of Intelligent Systems, Vol. 10, pp. 279-319, 2000.
236. B.Harris, D. J. Cook, and F. L. Lewis, “Combining Representations fromManufacturing, Machine Planning, and Manufacturing Resource Planning (MRP),” in Proceedings of the AAAI Workshop on Representational Issues for Real-World Planning Systems, 2000.
237. B. Harris, F. L. Lewis, and D. J. Cook, “Machine Planning for Manufacturing: Dynamic Resource Allocation and On-line Supervisory Control,” Journal of Intelligent Manufacturing, Vol. 9, No. 5, pp. 413-430, 1998.
238. S. Bogdan, F. L. Lewis, Z. Kovacic, and J. Mireles, Jr., Manufacturing Systems Control Design: A Matrix Based Approach (Advances in Industrial Control), Springer-Verlag, London, 2006.
239. S. A. Thibadoux, “Robotic Acquisition Programs-Technical and Performance Challenges,” in Unmanned Ground Vehicle Technology IV, Proceedings of SPIE 4715, pp. 128-138, Orlando, FL, USA, 2002.
240. J. S. Albus, “Intelligent Systems Design,” Plenary Talk, Army Science Conference, Orlando, FL, USA, 2008.
241. J. A. Bornstein, “Army Ground Robotics Research Program,” in Unmanned Ground Vehicle Technology IV, Proceedings of SPIE 4715, pp. 118-127, Orlando, FL, USA, 2002.
242. H. K. Shah, V. Bahl, J. Martin, N. S. Flan, and K. L. Moore, “Intelligent Behavior Generator for Autonomous Mobile Robots Using Planning-Based AI Decision-Making and Supervisory Control Logic,” in Proceedings of SPIE 4715, pp. 161-177, Orlando, FL, USA, 2002.
243. W. Smuda, P.Muench, G. Gerhart, and K. L. Moore, “Autonomy and Manual Operation in a Small Robotic System for Under-Vehicle Inspections at Security Checkpoints,” in Unmanned Ground Vehicle Technology IV, Proceedings of SPIE 4715, pp. 1-12, Orlando, FL, USA, 2002.
244. D. V. Steward, “The Design Structure System: A Method for Managing the Design of Complex Systems,” IEEE Transactions on Engineering Management, Vol. 28, No. 3, pp. 71-74, August 1981.
245. J. D. Wolter, S. Chakrabarty, and J. Tsao, “Methods of Knowledge Representation for Assembly Planning,” in Proceedings of the 18th Annual NSF Conference on Design and Manufacturing Systems Research, pp. 463-469, Atlanta, GA, USA, January 1992.
246. S. H. Young and H.M. Nguyen, “System Design For Robot Agent Team,” in Unmanned Ground Vehicle Technology IV, Proceedings of SPIE 4715, pp. 31-42, Orlando, FL, USA, 2002.
247. A. Kusiak and J. Ahn, “Intelligent Scheduling of Automated Machining Systems,” Computer-Integrated Manufacturing Systems, Vol. 5, No. 1, pp. 3-14, 1992, (Reprinted in A. Kusiak (Ed.), Intelligent Design and Manufacturing, John Wiley, New York, NY, pp. 421-447, 1992).
248. A. Gurel, S. Bogdan, and F. L. Lewis, “Matrix Approach to Deadlock-Free Dispatching in Multi-Class Finite Buffer Flowlines,” IEEE Transactions on Automatic Control, Vol. 45, No. 11, pp. 2086-2090, 2000.
249. H. -H. Huang, P. J. Gmytrasiewicz, and F. L. Lewis, “Combining Matrix Formulation and Agent-Oriented Techniques For Conflict Resolution in Manufacturing Systems,” in Proceedings of ACME, pp. 66-79, Chicago, IL, USA, 1996.
250. R. A.Wysk, N. S.Yang, and S. Joshi, “Detection of Deadlocks in FlexibleManufacturing Cells,” IEEE Transactions on Robotics and Automation, Vol. 7, No. 6, pp. 853-859, 1991.
251. G. S. Gursaran, S. Kanungo, and A. K. Sinha, “Rule-Base Content Verification Using a Digraph-Based Modelling Approach,” Artificial Intelligence in Engineering, Vol. 13, No. 3, pp. 321-336, 1999.
252. http://www.army.mil/fcs/index.html [Online].
253. http://www.defensetech.org/archives/cat_fcs_watch.html [Online].
254. H.De Keulenaer, R. Belmans, E. Blaustein, D. Chapman, A.DeAlmeida, B.DeWachter, and P. Radgen, “Energy Efficient Motor Driven Systems…can save Europe 200 billion kWh of electricity consumption and 100 million tonne of greenhouse gas emissions a year,” http://re.jrc.ec.europa.eu/energyefficiency/pdf/HEM_lo_all%20final.pdf [Online], 2004.
255. EU SAVEII Project, “Promotion of Energy Efficiency in Circulation Pumps, Especially in Domestic Heating Systems,” Final Report, Contract No. 4.1031/-Z/99-256, June 2001.
256. J. Haataja and J. Pyrhonen, “Improving Three-Phase Induction Motor Efficiency in Europe,” IEE Power Engineering Journal, Vol. 12, No. 2, pp. 81-86, April 1998.
257. D. Walters, “Energy-Efficient Motors-Saving Money or Costing the Earth? Part 1,” IEE Power Engineering Journal, Vol. 13, No. 1, pp. 25-30, February 1999.
258. D. Walters, “Energy-Efficient Motors-Saving Money or Costing the Earth? Part 2,” IEE Power Engineering Journal, Vol. 13, No. 2, pp. 17-23, April 1999.
259. B. Lu, T. G. Habetler, R. G. Harley, J. A. Gutierrezand, and D. B. Durocher, “Energy Evaluation Goes Wireless,” IEEE Industry Applications Magazine, Vol. 13, No. 2, pp. 17-23, March 2007.
260. T. Sattia, K. Younga, and S. Groverb, “Detecting Catastrophic Failure Events in Large-ScaleMillingMachines,” International Journal of Machine Tools and Manufacture, Vol. 49, No. 14, pp. 1104-1113, November 2009.
261. M. Jamshidi, Systems of Systems Engineering: Principles and Applications, CRC Press, 2008.
262. M. Maier, “Architecting Principles for Systems-of-Systems,” Systems Engineering, Vol. 1, No. 4, pp. 267-284, 1998.
263. J. Dahmann and K. J. Baldwin, “Understanding the Current State of US Defense Systems of Systems and the Implications for Systems Engineering,” in Proceedings of the IEEE Systems Conference, Montreal, Quebec, Canada, April 7-10, 2008.