Modeling and characterization of energy storage devices

IEEE Power and Energy Society General Meeting

Volumn , Issue , 2011, Pages

  Martinez, Juan A ^a  

^a UNIVERSITAT POLITÈCNICA DE CATALUNYA   (Spain)

Author keywords

Distributed Resource; Distribution System; Modeling; Ragone Plot; Storage

Indexed keywords

DISTRIBUTED RESOURCES; DISTRIBUTION SYSTEMS; ENERGY STORAGE SYSTEMS; INCREASING PRODUCTION; MAIN CHARACTERISTICS; POWER SYSTEM STUDIES; RAGONE PLOT; RENEWABLE SOURCES; STORAGE TECHNOLOGY;

ELECTRIC ENERGY STORAGE; ELECTRIC POWER SYSTEMS; ELECTRIC UTILITIES; ENERGY STORAGE; MODELS; POWER TRANSMISSION; VIRTUAL STORAGE;

SOLAR ENERGY;

EID: 82855167116     PISSN: 19449925     EISSN: 19449933     Source Type: Conference Proceeding    
DOI: 10.1109/PES.2011.6039321     Document Type: Conference Paper

References (58)

1. J.P. Barton and D.G. Infield, "Energy storage and its use with intermittent renewable energy," IEEE Trans. on Energy Conversion, vol. 19, no. 2, pp. 441-448, June 2004.
2. P. Denholm, E. Ela, B. Kirby, and M. Milligan, "The role of energy storage with renewable electricity generation," NREL Report TP-6A2- 47187, January 2010.
3. J. Eyer and G. Corey, "Energy Storage for the Electricity Grid: Benefits and Market Potential Assessment Guide," Sandia Report, SAND2010- 0815, February 2010.
4. D.T. Ton, C.J. Hanley, G.H. Peek, and J.D. Boyes, "Solar Energy Grid Integration Systems - Energy Storage (SEGIS-ES)," Sandia Report, SAND2008-4247, July 2008.
5. "EPRI-DOE Handbook Supplement of Energy Storage for Grid Connected Wind Generation Applications," EPRI Report 1008703, December 2004.
6. J.N. Baker, A. Collinson, G.W. Hunt, A. Green, A. Price, S. Bartley, S. Male, G. Cooley, A. Shibata, K. Sato, E. Kodama, Y. Kurashima, P. Lex, B. Jonshagen, R. Schottler, R.G. Coney, A. Campbell, R. McHattie, C. Tarrant, and O. Weinmann, "Special feature: Electrical energy storage," Inst. Elect. Eng. Power Eng. J., vol. 13, no. 3, pp. 107-180, June 1999.
7. P. Biczel, "Energy Storage Systems," Chapter 9 of Power Electronics in Smart Electrical Energy Networks (R. Strzelecki and G. Benysek, Eds.), Springer 2008.
8. "EPRI-DOE Handbook of Energy Storage for Transmission and Distribution Applications," EPRI Report No. 1001834, December 2003.
9. S.C. Smith, P.K. Sen, and B. Kroposki, "Advancement of energy storage devices and applications in electrical power system," IEEE PES General Meeting, Pittsburgh, July 2008.
10. P.F. Ribeiro, B.K. Johnson, M.L. Crow, A. Arsoy, and Y. Liu, "Energy storage systems for advanced power applications," Proc. of IEEE, vol. 89, no. 12, pp. 1744-1756, December 2001. (Pubitemid 33766648)
11. J. Baker, "New technology and possible advances in energy storage,"Energy Policy, vol. 36, pp. 4368-4373, 2008.
12. H. Ibrahim, A. Ilinca, and J. Perron, "Energy storage systems- Characteristics and comparisons," Renewable and Sustainable Energy Reviews, vol. 12, pp. 1221-1250, 2008. (Pubitemid 351492608)
13. J. Kondoh, I. Ishii, H. Yamaguchi, A. Murata, K. Otani, K. Sakuta, N. Higuchi, S. Sekine, and M. Kamimoto, "Electrical energy storage systems for energy networks," Energy Conversion & Management, vol. 41, pp 1863-1874, 2000.
14. D. Connolly, "A Review of Energy Storage Technologies," University of Limerick, August 2009.
15. C. Naish, I. McCubbin, O. Edberg, and M. Harfoot, "Outlook of Energy Storage Technologies," European Parliament, Policy Department, Economic and Scientific Policy, February 2008.
16. D.V. Ragone, "Review of battery systems for electrically powered vehicles," Mid-Year Meeting of the Society of Automotive Engineers, Detroit, May 1968.
17. W.G. Pell and B.E. Conway, "Quantitative modeling of factors determining Ragone plots for batteries and electrochemical capacitors, "Journal of Power Sources, vol. 63, pp. 255-266, 1996. (Pubitemid 126366559)
18. T. Christen and M.W. Carlen, "Theory of Ragone plots," Journal of Power Sources, vol. 91, pp. 210-216, 2000.
19. T. Christen and C. Ohler, "Optimizing energy storage devices using Ragone plots," Journal of Power Sources, vol. 110, pp. 107-116, 2002. (Pubitemid 41325342)
20. D. Cericola, P.W. Ruch, R. Kötz, P. Novák, and A. Wokaun, "Simulation of a supercapacitor/Li-ion battery hybrid for pulsed applications," Journal of Power Sources, vol. 195, pp. 2731-2736, 2010.
21. S.E. Letendre and W. Kempton, "The V2G concept: a new model for power?," Public Utilities Fortnightly, pp. 16-26, February 15, 2002.
22. "DYNASTORE - A computer Model for Quantifying Dynamic Energy Storage Benefits," EPRI AP-5550, December 1987.
23. "User's Guide to DYNASTORE: A Computer Model for Quantifying Dynamic Energy Storage Benefits," EPRI GS-5550, December 1990.
24. "DYNATRAN: Dynamic Analysis of Interconnected Systems with Energy Storage," EPRI Report No. 1006531, December 2001.
25. CIGRE Task Force 38.01.10, "Modeling New Forms of Generation and Storage," CIGRE Brochure 185, April 2001.
26. M. Ceraolo, "New dynamical models of lead-acid batteries," IEEE Trans. on Power Systems, vol. 15, no. 4, pp. 1184-1190, November 2000. (Pubitemid 32870269)
27. S. Barsali and M. Ceraolo, "Dynamical models of lead-acid batteries: Implementation issues," IEEE Trans. Energy Conversion, vol. 17, no. 1, pp. 16-23, March 2002. (Pubitemid 34404505)
28. S. Buller, M. Thele, R.W.A.A. De Doncker, and E. Karden, "Impedance-based simulation models of supercapacitors and Li-ion batteries for power electronic applications," IEEE Trans. on Industry Applications, vol. 41, no. 3, pp. 742-747, May/June 2005.
29. M. Chen and G. A. Rincón-Mora, Accurate Electrical Battery Model Capable of Predicting Runtime and I-V Performance, IEEE Trans. on Energy Conversion, vol. 21, no. 2, pp. 504-511, June 2006. (Pubitemid 43820862)
30. O. Tremblay, L.A. Dessaint, and A.I. Dekkiche, "A generic battery model for the dynamic simulation of hybrid electric vehicles," IEEE Vehicle Power and Propulsion Conf., Arlington (TX), September 2007.
31. M. Coleman, W.G. Hurley, and C. Kwan Lee, "An improved battery characterization method using a two-pulse load test," IEEE Trans. on Energy Conversion, vol. 23, no. 2, pp. 708-713, June 2008. (Pubitemid 351751822)
32. F. Xuyun and S. Zechang, "A battery model including hysteresis for state-of-charge estimation in Ni-MH battery," IEEE Vehicle Power and Propulsion Conf., Harbin (China), September 2008.
33. L.R. Chen, C.S. Liu, and J.J. Chen, "Improving phase-locked battery charger speed by using resistance-compensated technique," IEEE Trans. on Industrial Electronics, vol. 56, no. 4, pp. 1205-1211, April 2009.
34. K.C. Divya and J. Østergaard, "Battery energy storage technology for power systems-An overview," Electric Power Systems Research, vol. 79, pp. 511-520, 2009.
35. S. Tian, M. Hong, and M. Ouyang, An experimental study and nonlinear modeling of discharge I-V behavior of valve-regulated leadacid batteries, IEEE Trans. on Energy Conversion, vol. 24, no. 2, pp. 452-458, June 2009.
36. C.R. Gould, C.M. Bingham, D.A. Stone, and P. Bentley, "New battery model and state-of-health determination through subspace parameter estimation and state-observer techniques," IEEE Trans. on Vehicular Technology, vol. 58, no. 8, pp. 3905-3916, October 2009.
37. S. Buller, E. Karden, D. Kok, and R.W. De Doncker, "Modeling the dynamic behavior of supercapacitors using impedance spectroscopy,"IEEE Trans. on Industry Applications, vol. 38, no. 6, pp. 1622-1626, November/December 2002.
38. S. Buller, M. Thele, R.W. De Doncker, And E. Karden, "Impedancebased simulation models," IEEE Industry Applications Magazine, pp. 62-67, March|April 2005.
39. S. Buller, M. Thele, R.W.A.A. De Doncker, and E. Karden, "Impedance-based simulation models of supercapacitors and Li-ion batteries for power electronic applications," IEEE Trans. on Industry Applications, vol. 41, no. 3, pp. 742-747, May/June 2005.
40. C. Abbey and G. Joos, "Supercapacitor energy storage for wind energy applications," IEEE Trans. on Industry Applications, vol. 43, no. 3, pp. 769-776, May/June 2007.
41. W. Li, G. Joos, and J. Bélanger, "Real-time simulation of a wind turbine generator coupled with a battery supercapacitor energy storage system," IEEE Trans. on Industrial Electronics, vol. 57, no. 4, pp. 1137-1145, April 2010.
42. R. Aghatehrani, R. Kavasseri, and R. Chandra Thapa, "Power smoothing of the DFIG wind turbine using a small energy storage device," IEEE PES General Meeting, Minneapolis, July 2010.
43. B. Bolund, H. Bernhoff, and M. Leijon, "Flywheel energy and power storage systems," Renewable and Sustainable Energy Reviews, vol. 11, pp. 235-258, 2007. (Pubitemid 44142296)
44. G.O. Suvire and P.E. Mercado, "DSTATCOM with flywheel energy storage system for wind energy applications: Control design and simulation," Electric Power Systems Research, vol. 80, pp. 345-353, 2010.
45. J. Fang, H. Sun, L. Cui, X. Peng, J. Wen, L. Jiang, and S. Cheng, "Study on a 35kJ/7.5kW high-temperature superconducting magnetic energy storage prototype: development, modeling and application,"IEEE PES General Meeting, Minneapolis, July 2010.
46. M. Hasan, B. Wu, and R.A. Dougal, "An Overview of SMES applications in power and energy systems," IEEE Trans. on Sustainable Energy, vol. 1, no. 1, pp. 38-47, April 2010.
47. J. Liang, and R.G. Harley, "Pumped storage hydro-plant models for system transient and long-term dynamic studies," IEEE PES General Meeting, Minneapolis, July 2010.
48. R. Dugan, "OpenDSS STORAGE Element and STORAGE CONTROLLER Element," Version 7.3.3, October 2010. Available at http://electricdss.svn. sourceforge.net/viewvc/electricdss/Doc.
49. Bagen and R. Billinton, "Incorporating well being considerations in generating systems using energy storage," IEEE Trans. on Energy Conversion, vol. 20, no. 1, pp. 225-230, March 2005.
50. N. Lu, M.R. Weimar, Y.V. Makarov, F.J. Rudolph, S.N. Murthy, J. Arseneaux, and C. Loutan, "An evaluation of the flywheel potential for providing regulation service in California," IEEE PES General Meeting, Minneapolis, July 2010.
51. J.T. Alt, M.D. Anderson, and R.G. Jungst, "Assessment of utility side cost savings from battery energy storage," IEEE Trans. on Power Systems, vol. 12 no. 3, pp. 1112-1120, August 1997. (Pubitemid 127771485)
52. C.H. Lo and M.D. Anderson, "Economic dispatch and optimal sizing of battery energy storage systems in utility load-leveling operations,"IEEE Trans. on Energy Conversion, vol. 14, no. 3, pp. 824-829, September 1999. (Pubitemid 30528668)
53. T.-Y. Lee and N. Chen, "Determination of optimal contract capacities and optimal sizes of battery energy storage systems for time-of-use rates industrial customers," IEEE Trans. on Energy Conversion, vol. 10, no. 3, pp. 562-568, September 1995.
54. W.-F. Su, S.-J. Huang, and C.-E. Lin, "Economic analysis for demandside hybrid photovoltaic and battery energy storage system," IEEE Trans. on Industry Applications, vol. 37, no. 1, pp. 171-177, January/February 2001.
55. J.F. Manwell, A. Rogers, G. Hayman, C.T. Avelar, and J.G. McGowan, "Hybrid2 - A Hybrid System Simulation Model, Theory Manual", Renewable Energy Research Laboratory, Department of Mechanical Engineering, University of Massachusetts, November 1998.
56. T. Lambert, P. Gilman, and P. Lilienthal, "Micropower System Modeling with HOMER", Chapter 15 of Integration of Alternative Sources of Energy, by F.A. Farret and M. Godoy Simões, John Wiley, 2006.
57. J.F. Manwell and J. G. McGowan, "Lead acid battery storage model for hybrid energy systems," Solar Energy, vol. 50, pp. 399-405, 1993.
58. J.F. Manwell, J.G. McGowan, U. Abdulwahid, and K. Wu, "Improvements to the Hybrid2 battery model," Windpower 2005 Conf., Denver, May 2005.